Remove backup bottleneck: please report
For history purpose (as forums will be merged), I copy here my post on XOA Forums:
We are currently evaluating XOA as a management interface to XCP/XS and espacially as a backup solution.
As delta backup is a really good solution, the main drawback we saw is the "export bottleneck".
Using XAPI to export VM/VHD is a good thing (much more reliable than other backup solutions) there are somme huge bottlenecks.
The one that we disscussed with XOA support this morning is the stunnel thing.
By default all connections to XAPI is sent trough HTTPS and stunnel is the one in charge of encryption.
In our env, we mostly get between 60/90MB per sec as backup speed with XOA (Network is 10G and disks are SSD).
So we tested connection (using tricky conf) in HTTP to Xen pool in order to get some improvments.
As soon as we switched to HTTP, backup speed increased (+++). We switched to more than 200MB per sec.
So (this is already known) stunnel is a huge bootleneck.
Removing it reduces security (sic) but increases perfs. Security can be mitigated by the overall security of the relying network (like internal or isolated).
Some discussions have been pointed on Citrix forums about the fact that stunnel is an old version and can be updated.
"Recent" versions are known to have "parallel" encryption to increase performance.
As a "stupid" test we updated stunnel (to (5.44) on a fresh install of XCP to test if it changes anything.
But we do not noticed any improvments.
We will make some tests later to see if a new version of stunnel can help to speedup things.
Original post was here:
Last update before one week holydays
I found that in stunnel by default on XCP/XC compression is set to "zlib" which will compress all data flow.
After some investigation it seems that XOA HTTP client to XAPI do not implement compression.
So disabling it as no effect.
Some tests have shown no effective difference in disabling zlib in stunnel.
@olivierlambert I do the http thing since we started at work with xenorchestra backup. Works fine for some years now.
I just made the switch in the lab now before calling it a week. I'm testing backups to the SAN over the weekend so I should have some results on Monday.
Is it just XO that uses https by default when talking xapi or do pool members default to https as well when talking with each other? If it makes as much as a difference as is expected here, wouldn't http by default be the answer for xcp-ng with the option to turn on ssl if needed? Assuming xcpng hosts are connected to well protected management and SAN networks only then http shouldn't be an issue.
Maybe run it on both http and https and let the admin decide which interfaces to bind to which ports based on need during install or at least via config file changes?
If hosts are talking https by default, can they be switched to http using something similar to this? It just seems like the perf gains are pretty significant and if you're running your pool on a secured management network then this seems like a potential big win for perf.
If hosts are talking https by default, can they be switched to http using something similar to this?
This would be a huge improvement for disk migrations. I did and do many migration in the next days. This is what I found on CLI:
# ps aux | cat | grep sparse_dd root 32352 2.3 0.1 158188 28520 ? Ssl 23:07 0:59 /usr/libexec/xapi/sparse_dd -machine -src /dev/sm/backend/24236a41-7f7d-8edb-99df-6eb8ba26b715/cf04f6a0-1d79-4846-918e-97184cd68d16 -dest http://XX.XX.XX.XX/services/SM/nbd/187a0b1a-d927-f06f-0a3c-ec5e69414660/481306d1-3057-4ceb-9b7b-19b6e4f3dbe2/063a4c43-8abf-b2ee-dd78-29f46df34084?session_id=OpaqueRef%3addc8eaf8-aaaa-43a6-bff1-20c4a91ef371 -size 214748364800 -good-ciphersuites !EXPORT:RSA+AES128-SHA256 -legacy-ciphersuites RSA+AES256-SHA:RSA+AES128-SHA:RSA+RC4-SHA:RSA+DES-CBC3-SHA -ssl-legacy -prezeroed
It seems to connect using http but has
-ssl-legacyin the command, I assume is uses SSL under the hood.
Would be nice to avoid these additional layers at all.
I try the new new compression with may small envirment its running. I am using for XO a HP620 Thin client. The direct export with the new compression is working. A very small VM with 30GB HDD (4GByte in use) the transferrate was between 5MByte/s to 18MByte/s. A bigger one with 300GByte (200 in use) ther was the rate mostly araound 20MByte, but the transfer was moving to a USB2 HDD.
It looks very fine next i will try a transfer to a local disk or a USB3.0 HDD
Wow, switching to
httpmade quite a difference! By rough calculation, time to do a continuous replication is about 1/4 of what it previously was.
My XOA is connected to a 1Gbps interface and so are the various XCP servers. This is a dedicated network for VM server management / VM replication.
As comparison, a 1.76TiB VM took 11 hours 28 min to do it's initial replication when running on
https. But once
httpswas turned off, a different VM which is 4.28TiB, took 19 hours and 58 minutes. It was the first time I was able to do an initial replication on this VM as previously, it would take more than 24 hours and XCP would kill the job.
Smaller continuous replication jobs (deltas) are also faster. 40-60 minutes to do a 120GiB delta with
httptook 25 minutes.
I can probably gain more by moving the replication to a 10G network - or at least XOA will be able to deal better with concurrent replication jobs between different servers since it all funnels through XOA.
In you case,
stunnelwas probably a bottleneck, yes.
What's the CPU model on your dom0? Also if your dom0 CPU usage is high, you have less computer power for
stunnel, explaining the perf diff you have in your case (but it's not universal)
CPU are Intel E5-2609 v4 @ 1.70GHz in this case.
Overall stats show CPU below 50% usage overall, load average between 3-4 during continue replication job.
Dom0 top show 2-3 load average.
Yes so on a low frequency CPU,
stunnelis indeed a bottleneck. It's far less the case on CPU with higher clock
I realize this topic is ~9 months old, but I have been struggling getting XOA to take advantage of the 10GB network it's running on and the all SSD-based storage system it has at its disposal.
I finally came across this post--and for the first time in a year, I've found something that actually increases backup speeds beyond the dismal speeds I've been stuck with.
When I switched everything to HTTP, I went from backing up 100GiB in an hour to just under 19 minutes--a 3 fold increase!! And all that from something as simple as putting HTTP in front of the Server IP. Woot!
The CPUs involved in this are not slouches XEON D's with 8 cores... so I don't think it's a DOM0 slowdown.
I still don't feel I am getting everything out of the system, but that is remarkably better.
Thank you for this tip. Wish there was a prominent section dedicated to increasing backup speeds. I'd pin this post to the very top as the gains from doing this far exceed messing around with concurrency and other settings...
Thanks for the feedback. In your case, Xeon D is likely causing slowness on HTTPS. I'll update the doc for putting this advice
@olivierlambert Hmmm... this comes from a test lab box, no other activity occurring, VMs are powered off for duration of these backup tests (except the XOA vm, which runs on a different box then the one being backed up), so there's zero load and I don't see the CPU ever getting over even 10% in dom0.
Have the same issue/see the same results on dual 24 core E5s. Granted those are also 2.2GHZ. What would be minimally acceptable CPU to overcome that 3x performance penalty of stunnel? I guess I should read up on the stunnel limitations more.
Could it be I'm not giving the XOA vm enough CPU/RAM? Or the wrong topology? I've looked for guidance on that too and haven't seen much online about it (especially in regards to speed).
Either way, I am excited that we can start taking advantage of that 3x increase in speed. Security can be handled by a VLAN/separate storage network, so really not concerned about using HTTP instead of HTTPS.
Any tips on how to configure storage/networks to take advantage of every bit of juice available would be awesome.
Thanks again for all you and your teams have done!!
@julien-f is doing a ton of work to rewire all backup code in a way it could be split into small bits, so we'll be able to get an easier code to improve and benchmark relatively soon
For example, we should have a stream "waiting" info to find which part in the chain is slowing things done. It's really hard without that to know where the bottleneck is.
Might be a limit in
stunnelbut as soon we got our "stream probe" we'll be able to pinpoint it more exactly.
Also, with and without HTTPS, are you seeing an XOA CPU usage change?
@olivierlambert Havent looked at that in a while... I'll run a test here shortly.
BTW, this is not quite the exact same setup as before (there are some test vm's idling in the background and I am only backing up a single VM). That said DOM0 on both the host running the VM being backed up and the host running the XOA box were in the 10%-15% range for the duration of the tests and idling around 2-4%
While the peaks in CPU under HTTPS do show slightly higher, the biggest thing I see is the wide divergence in the CPU on the two cores under HTTPS. Under HTTP, they look to be in lock step. Also note that the RAM usage on the XOA box jumps to full after about 25% of the way through the job. XOA was given 2 sockets with 1 core socket and 4GB ram.
Oh, and you can see we aren't even maxing 100MBps, let alone a 10GB. Disks involved are single SSDs, SATA6. So I dont expect to see 10GBps but still. Shouldn't I expect to see way more than 50? Those SSDs can easily do 500.
HTTP/ XOA performance. 3 mins for 18.89GIB
HTTPS/ XOA performance. 7 mins for 18.89GIB
Using Netdata would deliver for more insight on what's happening, both on the host and XO
rizaemet 0 last edited by rizaemet 0
Http ~7 times faster than https on our system for cr jobs. Https ~50MB/sec. Http ~350MB/sec.
xo from source 5.60
10 gbit connection everywhere
For me, switching to http seems to have increased the backup speed by about 3.5 times as well. However I feel like it's still pretty slow. I went from a reported transfer speed average of 3.26 MiB/s to 11.59 MiB/s across 16 VMs running on a pool consisting of two 8.1 XCP-ng hypervisors and a 5.61 Xen Orchestra Community VM backing up to an NFS share on a Synology RackStation over a 10 Gb/s storage network. When testing the speed with which I am able to write to the NFS share from the XO VM with dd it's averaging write speeds of about 95 MB/s.
Anything else I can do to try and figure out where the next bottleneck is?