<![CDATA[Several errors on boot]]>Hello,
I just installed XCP-ng on my brand-new bare-metal PC, and when booting, it temporarily stops with the following information:

2026-05-22T18:25:21+0200 : i2c i2c-0: Failed to register i2c client MSFT8000:00 at 0x42 (-16)
2026-05-22T18:25:21+0200 : i2c i2c-0: failed to add I2C device MSFT8000:00 from ACPI
2026-05-22T18:25:21+0200 : efi: EFI_MEMMAP is not enabled.
2026-05-22T18:25:21+0200 : hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19)

Here is the total content of the boot log.
Here is my XCP-ng installation log
Here is my "ASUS ProArt B650-creator" mother-board's BIOS settings

My question are:

  1. What are the consequences of these failures?
  2. What can be done to correct them?

Thanks in advance for your help.

]]>https://xcp-ng.org/forum/topic/12238/several-errors-on-bootRSS for NodeMon, 25 May 2026 22:49:34 GMTMon, 25 May 2026 19:32:29 GMT60<![CDATA[Reply to Several errors on boot on Mon, 25 May 2026 22:23:58 GMT]]>Hi,

This is harmless, you can ignore it 🙂

]]>https://xcp-ng.org/forum/post/105717https://xcp-ng.org/forum/post/105717Mon, 25 May 2026 22:23:58 GMT