<![CDATA[Unable to display files in File Restore (failed to setup loop device)]]>I get here and immediately get that exclamation mark and the below log error:

68e48ee0-f96a-4d96-9dda-1262b415360f-image.png

backupNg.listFiles
{
  "remote": "c7ae17c6-c7da-4ce5-a149-389257118aa1",
  "disk": "xo-vm-backups/9033182f-7a99-26c4-9f0c-f38c97438d3c/vdis/ea7fc1f6-bdb1-42af-8865-044767cf1340/6fd842c3-c025-4fee-80ad-fe2b3c33f6cc/20190427T140014Z.vhd",
  "path": "/",
  "partition": "7887b518-05/debian-vg/root"
}
{
  "code": 32,
  "stdout": "",
  "stderr": "mount: /tmp/tmp-751kkoSeZpmwHMt: failed to setup loop device for /dev/debian-vg/root.
",
  "failed": true,
  "signal": null,
  "cmd": "mount --options=loop,ro --source=/dev/debian-vg/root --target=/tmp/tmp-751kkoSeZpmwHMt",
  "timedOut": false,
  "killed": false,
  "message": "Command failed: mount --options=loop,ro --source=/dev/debian-vg/root --target=/tmp/tmp-751kkoSeZpmwHMt
mount: /tmp/tmp-751kkoSeZpmwHMt: failed to setup loop device for /dev/debian-vg/root.

",
  "name": "Error",
  "stack": "Error: Command failed: mount --options=loop,ro --source=/dev/debian-vg/root --target=/tmp/tmp-751kkoSeZpmwHMt
mount: /tmp/tmp-751kkoSeZpmwHMt: failed to setup loop device for /dev/debian-vg/root.


    at makeError (/opt/xen-orchestra/node_modules/execa/index.js:174:9)
    at Promise.all.then.arr (/opt/xen-orchestra/node_modules/execa/index.js:278:16)
    at tryCatcher (/opt/xen-orchestra/node_modules/bluebird/js/release/util.js:16:23)
    at Promise._settlePromiseFromHandler (/opt/xen-orchestra/node_modules/bluebird/js/release/promise.js:512:31)
    at Promise._settlePromise (/opt/xen-orchestra/node_modules/bluebird/js/release/promise.js:569:18)
    at Promise._settlePromise0 (/opt/xen-orchestra/node_modules/bluebird/js/release/promise.js:614:10)
    at Promise._settlePromises (/opt/xen-orchestra/node_modules/bluebird/js/release/promise.js:694:18)
    at Promise._fulfill (/opt/xen-orchestra/node_modules/bluebird/js/release/promise.js:638:18)
    at PromiseArray._resolve (/opt/xen-orchestra/node_modules/bluebird/js/release/promise_array.js:126:19)
    at PromiseArray._promiseFulfilled (/opt/xen-orchestra/node_modules/bluebird/js/release/promise_array.js:144:14)
    at Promise._settlePromise (/opt/xen-orchestra/node_modules/bluebird/js/release/promise.js:574:26)
    at Promise._settlePromise0 (/opt/xen-orchestra/node_modules/bluebird/js/release/promise.js:614:10)
    at Promise._settlePromises (/opt/xen-orchestra/node_modules/bluebird/js/release/promise.js:694:18)
    at _drainQueueStep (/opt/xen-orchestra/node_modules/bluebird/js/release/async.js:138:12)
    at _drainQueue (/opt/xen-orchestra/node_modules/bluebird/js/release/async.js:131:9)
    at Async._drainQueues (/opt/xen-orchestra/node_modules/bluebird/js/release/async.js:147:5)
    at Immediate.Async.drainQueues (/opt/xen-orchestra/node_modules/bluebird/js/release/async.js:17:14)
    at runCallback (timers.js:810:20)
    at tryOnImmediate (timers.js:768:5)
    at processImmediate [as _immediateCallback] (timers.js:745:5)"
}

It seems to be just this VM, my others are OK...

]]>https://xcp-ng.org/forum/topic/1263/unable-to-display-files-in-file-restore-failed-to-setup-loop-deviceRSS for NodeTue, 08 Sep 2026 09:51:41 GMTTue, 30 Apr 2019 06:19:12 GMT60<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 12:40:39 GMT]]>@olivierlambert Yep cool, thanks for your help 🙂

]]>https://xcp-ng.org/forum/post/11213https://xcp-ng.org/forum/post/11213Tue, 30 Apr 2019 12:40:39 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 12:37:48 GMT]]>There is no "maintenance" but community support if you follow how it's installed from our official documentation: https://xen-orchestra.com/docs/from_the_sources.html

If you use something else (like a 3rd party script), then create an issue on the GH repo where you found the script 🙂

]]>https://xcp-ng.org/forum/post/11212https://xcp-ng.org/forum/post/11212Tue, 30 Apr 2019 12:37:48 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 12:34:25 GMT]]>@olivierlambert Thanks for that. Well it seems fine in the main XO so I guess it's a problem with the community version, or at least my install of it (plus something to do with that single VM). Who maintains the community version?

]]>https://xcp-ng.org/forum/post/11211https://xcp-ng.org/forum/post/11211Tue, 30 Apr 2019 12:34:25 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 12:14:53 GMT]]>Extended!

]]>https://xcp-ng.org/forum/post/11207https://xcp-ng.org/forum/post/11207Tue, 30 Apr 2019 12:14:53 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 11:59:23 GMT]]>No problem 🙂 I'll extend your trial

]]>https://xcp-ng.org/forum/post/11206https://xcp-ng.org/forum/post/11206Tue, 30 Apr 2019 11:59:23 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 10:20:52 GMT]]>@olivierlambert Ah thanks, it has indeed expired. Is there any issue having both XO's running at the same time by the way?

]]>https://xcp-ng.org/forum/post/11199https://xcp-ng.org/forum/post/11199Tue, 30 Apr 2019 10:20:52 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 10:19:13 GMT]]>Let me know I can re-extend it 🙂

]]>https://xcp-ng.org/forum/post/11198https://xcp-ng.org/forum/post/11198Tue, 30 Apr 2019 10:19:13 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 10:18:45 GMT]]>@olivierlambert Ohh I think I've already used it actually. I'll boot up the VM and check.

]]>https://xcp-ng.org/forum/post/11197https://xcp-ng.org/forum/post/11197Tue, 30 Apr 2019 10:18:45 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 10:16:53 GMT]]>Okay, let us know. You can use the trial to unlock all features for 15 days, which is enough to test this 🙂

]]>https://xcp-ng.org/forum/post/11196https://xcp-ng.org/forum/post/11196Tue, 30 Apr 2019 10:16:53 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 10:15:53 GMT]]>@olivierlambert said in Unable to display files in File Restore (failed to setup loop device):

Okay, well 😄 We don't have a known issue with that on our support so I suppose it was "env" related 🙂

Aaaand now it's broken again haha. I'll try what you said and give it a go in XOA when I get a chance, see if it's the same there.

]]>https://xcp-ng.org/forum/post/11195https://xcp-ng.org/forum/post/11195Tue, 30 Apr 2019 10:15:53 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 10:14:09 GMT]]>Okay, well 😄 We don't have a known issue with that on our support so I suppose it was "env" related 🙂

]]>https://xcp-ng.org/forum/post/11194https://xcp-ng.org/forum/post/11194Tue, 30 Apr 2019 10:14:09 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 10:13:24 GMT]]>@olivierlambert Well... I was just typing out a response about how I can select the smaller partition called Linux just fine but not the bigger partition called root, but when I clicked on root this time it loaded just fine....

Can't really explain that. I did reboot the VM again a bit ago, but I tried it straight after that and it still didn't work. Now a couple of hours later with no changes at my end it's fine. Odd!

]]>https://xcp-ng.org/forum/post/11193https://xcp-ng.org/forum/post/11193Tue, 30 Apr 2019 10:13:24 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 10:11:26 GMT]]>To rule out a environment issue, you can try to same restore with XOA. If you have the issue too, it means there is a bug in XO. Otherwise, it's your install 🙂

]]>https://xcp-ng.org/forum/post/11192https://xcp-ng.org/forum/post/11192Tue, 30 Apr 2019 10:11:26 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 10:09:02 GMT]]>@olivierlambert One does, but that seems fine with the file restore...

]]>https://xcp-ng.org/forum/post/11190https://xcp-ng.org/forum/post/11190Tue, 30 Apr 2019 10:09:02 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 10:05:56 GMT]]>You other VMs also have LVM with a "--" in the LV name?

]]>https://xcp-ng.org/forum/post/11189https://xcp-ng.org/forum/post/11189Tue, 30 Apr 2019 10:05:56 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 07:20:16 GMT]]>Sorry, quick question just because it'll probably save me hours of googling 😉

The log says

failed to setup loop device for /dev/debian-vg/root

If I run lsblk -fs in the VM I get:

 lsblk -fs
NAME              FSTYPE      LABEL UUID                                   MOUNTPOINT
xvda1             ext2              728f3ff5-b4e4-4c49-8440-1afca3bedffb   /boot
└─xvda                                                                     
xvda2                                                                      
└─xvda                                                                     
debian--vg-root   ext4              e91dbbbe-5fc8-4631-8693-00fdea49cfcf   /
└─xvda5           LVM2_member       0IfZhR-hixh-FPMO-nvSc-EdMa-l3Fh-JCFyC3 
  └─xvda                                                                   
debian--vg-swap_1 swap              3e7fab19-8bb2-47da-bb16-a829010e1d51   [SWAP]
└─xvda5           LVM2_member       0IfZhR-hixh-FPMO-nvSc-EdMa-l3Fh-JCFyC3 
  └─xvda

So is it that XO is trying to mount /dev/debian-vg/root but it's actually /dev/debian--vg/root ??

EDIT: Nope, never mind:

simon@dashboard:/dev/debian-vg$ ls
root  swap_1

Hmm.

EDIT2: If I run the same command in the VM I get:

simon@dashboard:/$ sudo mount --options=loop,ro --source=/dev/debian-vg/root --target=/tmp/tmp-751rBsQbj6YN1TI
mount: mount point /tmp/tmp-751rBsQbj6YN1TI does not exist

So is XO failing to create that first? I guess not as the error would probably indicate such

]]>https://xcp-ng.org/forum/post/11176https://xcp-ng.org/forum/post/11176Tue, 30 Apr 2019 07:20:16 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 06:49:13 GMT]]>@olivierlambert Yep fair enough.

It's only that one VM so I guess it's that, I'll have a dig around.

]]>https://xcp-ng.org/forum/post/11174https://xcp-ng.org/forum/post/11174Tue, 30 Apr 2019 06:49:13 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 06:47:41 GMT]]>So you are using "local" remote right?

Anyway, because you are using a 3rd party installer, I'm not really able to assist (because we can't "validate" those installer/updater while we are adding/removing stuff on our side).

  1. If you can't see the files for all your backup VMs, I would suggest to create an issue on the installer GitHub repo because it's mainly an "environment" issue
  2. If you can't see files only for this VM, then it's maybe your VM is not "like" the others
]]>https://xcp-ng.org/forum/post/11173https://xcp-ng.org/forum/post/11173Tue, 30 Apr 2019 06:47:41 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 06:41:50 GMT]]>@olivierlambert

No worries:

  1. Yep I'm using the community version. I've set it up via this script and keep it updated via this script.

  2. I just ran the update script and am on 5.40.0, but I tried it with 5.35 before I updated and it didn't work (that's why I tried updating).

  3. My VM's are stored on internal SSD's in raid

]]>https://xcp-ng.org/forum/post/11171https://xcp-ng.org/forum/post/11171Tue, 30 Apr 2019 06:41:50 GMT<![CDATA[Reply to Unable to display files in File Restore (failed to setup loop device) on Tue, 30 Apr 2019 06:31:04 GMT]]>We need more context:

  1. Are you using XOA or XO from the sources? If from the sources, did you install it following the official documentation?
  2. Are you up to date?
  3. On what kind of remote are stored your VMs?
]]>https://xcp-ng.org/forum/post/11168https://xcp-ng.org/forum/post/11168Tue, 30 Apr 2019 06:31:04 GMT