<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Firepro S7150x2 SR-IOV Errors]]></title><description><![CDATA[<p dir="auto">Hi Everyone,<br />
I am new to XCP-ng, so please let me know if this belongs elsewhere!</p>
<p dir="auto">I have XCP-ng (7.6) installed and (mostly) working on a Dell R720. Everything is working fine, but for MxGPU SR-IOV. I can passthough a single GPU fine, and it works under load just fine in Windows and Linux.<br />
However, when I install the drivers as instructed here (<a href="https://github.com/xcp-ng/xcp/wiki/MxGPU" target="_blank" rel="noopener noreferrer nofollow ugc">https://github.com/xcp-ng/xcp/wiki/MxGPU</a>), restart the server, and attempt to start the VM again, I am presented with "Internal Error: No free virtual function found". SR-IOV is enabled for all devices in the server's UEFI, and the MxGPU supplemental pack install completes without displaying anything else.</p>
<p dir="auto">Some other details that may help:<br />
Dell R720<br />
2x Xeon E5 2680<br />
32Gb DDR3L ECC RAM<br />
2x 1100w PSUs set to Redundant mode<br />
Appropriate riser and power cables installed<br />
Firepro S7150x2 installed in the Riser 3 top slot</p>
<p dir="auto">The Dell support article I referenced mentions having everything that I have, but they advise having CPUs under 115w, but, IIRC, the Xeon E5 2680s are rated at 130w each. However, when both the CPU and GPU are loaded when one of the GPUs is passed though, server load never goes above ~450w (about 50% of server load). Long story short, I doubt that the CPUs drawing at max 30w more probably isn't the issue. <a href="https://www.dell.com/support/manuals/us/en/04/poweredge-r720/720720xdom-v3/gpu-card-installation-guidelines?guid=guid-268578e4-b96b-43ba-ac13-58c567cbb670&amp;lang=en-us" target="_blank" rel="noopener noreferrer nofollow ugc">https://www.dell.com/support/manuals/us/en/04/poweredge-r720/720720xdom-v3/gpu-card-installation-guidelines?guid=guid-268578e4-b96b-43ba-ac13-58c567cbb670&amp;lang=en-us</a></p>
<p dir="auto">Any help you all could offer to get MxGPU working would be greatly appreciated!</p>
<p dir="auto"><img src="/forum/assets/uploads/files/1596910549185-d9b47c9f-4738-43b7-9178-5e300ffedfb1-image.png" alt="d9b47c9f-4738-43b7-9178-5e300ffedfb1-image.png" class=" img-fluid img-markdown" /><br />
<img src="/forum/assets/uploads/files/1596910561528-cca39192-f706-47d8-b6bf-05a0ab69cc45-image.png" alt="cca39192-f706-47d8-b6bf-05a0ab69cc45-image.png" class=" img-fluid img-markdown" /></p>
]]></description><link>https://xcp-ng.org/forum/topic/3404/firepro-s7150x2-sr-iov-errors</link><generator>RSS for Node</generator><lastBuildDate>Sun, 19 Apr 2026 08:28:21 GMT</lastBuildDate><atom:link href="https://xcp-ng.org/forum/topic/3404.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 08 Aug 2020 18:17:35 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Sat, 13 Mar 2021 09:47:40 GMT]]></title><description><![CDATA[<p dir="auto">I have the same problem with xcp-ng-8.2. I'm trying to start with mxgpu with HPE ML380p Gen8 E5-2620V2. Inserting pci=realloc pci=assign-busses the server cannot boot. Below the point of boot where it crashes.<br />
The log in images seems to recall a known bug  --&gt;  "choose an explicit smt=(bool) setting. See XSA-297"<br />
It's the pci=assign-busses that cannot permit to boot but without it "modprobe gim" has not inserted.  Also using usb disk avoiding PCI disk system crashs during startup. Firmware bios is really recent ( 2019 ) , the last one.  Someone has resolved this issue ?<img src="/forum/assets/uploads/files/1615626649154-crash-assign-busses-resized.jpg" alt="crash-assign-busses.jpg" class=" img-fluid img-markdown" /></p>
]]></description><link>https://xcp-ng.org/forum/post/37515</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/37515</guid><dc:creator><![CDATA[m6]]></dc:creator><pubDate>Sat, 13 Mar 2021 09:47:40 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Fri, 18 Dec 2020 16:41:58 GMT]]></title><description><![CDATA[<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/forum/user/tbluml" aria-label="Profile: tbluml">@<bdi>tbluml</bdi></a>  I'm trying to make a MxGPU setup with similar hardware (dell r720, 2x E5-2650).<br />
I got the same SR-IOV errors as you. I added the pci=realloc pci=assign-busses params.<br />
Unfortunately the the system does not manage to boot when adding pci=assign-busses.<br />
Root disk in not discovered and dracut shell is started.<br />
Did you run into the same issue and if so how did you fix it?</p>
<p dir="auto">Edit:<br />
If anyone else stumbles upon this.<br />
I reinstalled on (usb) disk that is not connected to the raid controller and it seems to work now.<br />
I speculate that since the controller is a PCI device and pci=assign-busses allows the kernel to override pci numbers the raid device cannot be found using the predetermined data in the initramfs. But that might be complete nonsense (no expert in these matters).</p>
]]></description><link>https://xcp-ng.org/forum/post/34581</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/34581</guid><dc:creator><![CDATA[pigeon]]></dc:creator><pubDate>Fri, 18 Dec 2020 16:41:58 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Sat, 15 Aug 2020 15:39:10 GMT]]></title><description><![CDATA[<p dir="auto">Here: <a href="https://xcp-ng.org/docs/compute.html#mxgpu-amd-vgpu" target="_blank" rel="noopener noreferrer nofollow ugc">https://xcp-ng.org/docs/compute.html#mxgpu-amd-vgpu</a></p>
<p dir="auto">There's a link on the bottom off the page (called "Help us to improve this page!") to contribute to it and add what you did <img src="https://xcp-ng.org/forum/assets/plugins/nodebb-plugin-emoji/emoji/android/1f642.png?v=a78c449d9ac" class="not-responsive emoji emoji-android emoji--slightly_smiling_face" style="height:23px;width:auto;vertical-align:middle" title=":)" alt="🙂" /></p>
]]></description><link>https://xcp-ng.org/forum/post/30116</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/30116</guid><dc:creator><![CDATA[olivierlambert]]></dc:creator><pubDate>Sat, 15 Aug 2020 15:39:10 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Sat, 15 Aug 2020 15:37:08 GMT]]></title><description><![CDATA[<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/forum/user/olivierlambert" aria-label="Profile: olivierlambert">@<bdi>olivierlambert</bdi></a> I would be happy to. Is there a post or link to posting guidelines? (So I can make sure that what I write is in line with what has already been written?)</p>
]]></description><link>https://xcp-ng.org/forum/post/30115</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/30115</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Sat, 15 Aug 2020 15:37:08 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Fri, 14 Aug 2020 20:04:06 GMT]]></title><description><![CDATA[<p dir="auto">That's interesting! Maybe you can add this to the documentation?</p>
]]></description><link>https://xcp-ng.org/forum/post/30085</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/30085</guid><dc:creator><![CDATA[olivierlambert]]></dc:creator><pubDate>Fri, 14 Aug 2020 20:04:06 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Fri, 14 Aug 2020 18:31:19 GMT]]></title><description><![CDATA[<p dir="auto">I had the chance to try the rest of the commands linked by <a class="plugin-mentions-user plugin-mentions-a" href="/forum/user/tuxen" aria-label="Profile: tuxen">@<bdi>tuxen</bdi></a> today, and now I can successfully run a VM with MxGPU enabled and started! It looks like adding "pci=assign-busses" to this command did it.</p>
<pre><code>/opt/xensource/libexec/xen-cmdline --set-dom0 "pci=realloc pci=assign-busses" 
</code></pre>
<p dir="auto">Thank you all for you assistance!</p>
]]></description><link>https://xcp-ng.org/forum/post/30080</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/30080</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Fri, 14 Aug 2020 18:31:19 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Fri, 14 Aug 2020 05:43:32 GMT]]></title><description><![CDATA[<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/forum/user/tbluml" aria-label="Profile: tbluml">@<bdi>tbluml</bdi></a> Do you want to give a try to open source gim driver on your Dell machine? We may know more from it.</p>
]]></description><link>https://xcp-ng.org/forum/post/30060</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/30060</guid><dc:creator><![CDATA[r1]]></dc:creator><pubDate>Fri, 14 Aug 2020 05:43:32 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Thu, 13 Aug 2020 21:18:53 GMT]]></title><description><![CDATA[<p dir="auto">For the moment, I took the S7150x2 out of the R720 and put it in a Supermicro X10DRH-CT-O with E5-2620v3's for testing. After everything was set up, (BIOS, OS, and driver), I found that MxGPU did work. (Good to know that if all else fails, I have a machine that will work for what I need!)</p>
<p dir="auto">I will take a look at that, <a class="plugin-mentions-user plugin-mentions-a" href="/forum/user/tuxen" aria-label="Profile: tuxen">@<bdi>tuxen</bdi></a>! Thank you!</p>
]]></description><link>https://xcp-ng.org/forum/post/30059</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/30059</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Thu, 13 Aug 2020 21:18:53 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Thu, 13 Aug 2020 18:56:01 GMT]]></title><description><![CDATA[<p dir="auto">It's from the terminal/CLI. Alternatively, you can verify/change the boot options in <code>/boot/grub/grub.cfg</code> (for dom0 boot, see <code>module2 /boot/vmlinuz</code> entries).</p>
<p dir="auto">Found this Citrix KB adding one more pci option, take a look:<br />
<a href="https://support.citrix.com/article/CTX250121" target="_blank" rel="noopener noreferrer nofollow ugc">https://support.citrix.com/article/CTX250121</a></p>
]]></description><link>https://xcp-ng.org/forum/post/30054</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/30054</guid><dc:creator><![CDATA[tuxen]]></dc:creator><pubDate>Thu, 13 Aug 2020 18:56:01 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Thu, 13 Aug 2020 01:40:26 GMT]]></title><description><![CDATA[<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/forum/user/tuxen" aria-label="Profile: tuxen">@<bdi>tuxen</bdi></a> Just tried it (from the terminal), and rebooted with the same result unfortunately. Does the command need to be appended to a file, or should it work just from the terminal?</p>
<p dir="auto"><img src="/forum/assets/uploads/files/1597282795361-83d2c07f-180f-42a1-aa12-e44d72e6d8a0-image.png" alt="83d2c07f-180f-42a1-aa12-e44d72e6d8a0-image.png" class=" img-fluid img-markdown" /></p>
]]></description><link>https://xcp-ng.org/forum/post/30021</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/30021</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Thu, 13 Aug 2020 01:40:26 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Wed, 12 Aug 2020 22:44:05 GMT]]></title><description><![CDATA[<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/forum/user/tbluml" aria-label="Profile: tbluml">@<bdi>tbluml</bdi></a> did you try the <code>pci=realloc</code> workaround, as stated in the RHEL link?</p>
<pre><code># /opt/xensource/libexec/xen-cmdline --set-dom0 pci=realloc
</code></pre>
<p dir="auto"><em>Edit: reboot the host after applying the change.</em></p>
]]></description><link>https://xcp-ng.org/forum/post/30018</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/30018</guid><dc:creator><![CDATA[tuxen]]></dc:creator><pubDate>Wed, 12 Aug 2020 22:44:05 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Wed, 12 Aug 2020 00:05:07 GMT]]></title><description><![CDATA[<p dir="auto">Update: BIOS updated to most recent (2.9). Still having the same issue.</p>
]]></description><link>https://xcp-ng.org/forum/post/29978</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29978</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Wed, 12 Aug 2020 00:05:07 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Tue, 11 Aug 2020 20:39:30 GMT]]></title><description><![CDATA[<p dir="auto">Could a BIOS update potentially fix this issue?<br />
<a href="https://access.redhat.com/solutions/37376" target="_blank" rel="noopener noreferrer nofollow ugc">https://access.redhat.com/solutions/37376</a></p>
]]></description><link>https://xcp-ng.org/forum/post/29976</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29976</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Tue, 11 Aug 2020 20:39:30 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Tue, 11 Aug 2020 20:36:28 GMT]]></title><description><![CDATA[<p dir="auto">I just posted the results of dmesg, as the entire result was quite long. Let me know if you need anything else. I left in everything related to GIM. Thank you both again for your help!</p>
]]></description><link>https://xcp-ng.org/forum/post/29975</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29975</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Tue, 11 Aug 2020 20:36:28 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Tue, 11 Aug 2020 20:34:20 GMT]]></title><description><![CDATA[<pre><code>[ 1123.874023] AMD Virt GIM API
[ 1123.877477] gim: module license 'Proprietary' taints kernel.
[ 1123.877478] Disabling lock debugging due to kernel taint
[ 1123.880580]        gim info:(gim_init:197) *******AMD GIM init
[ 1123.880582]        gim info:(print_gim_version:62) GPU IOV MODULE (GIM) - version 2.00.0000
[ 1123.880582]        gim info:(gim_init:200) Copyright (c) 2014-2016 AMD Corporation.
[ 1123.880822]        gim info:(parse_config_file:295) AMD GIM fb_option = 0
[ 1123.880823]        gim info:(parse_config_file:295) AMD GIM sched_option = 0
[ 1123.880824]        gim info:(parse_config_file:295) AMD GIM vf_num = 0
[ 1123.880825]        gim info:(parse_config_file:295) AMD GIM pf_fb = 0
[ 1123.880826]        gim info:(parse_config_file:295) AMD GIM vf_fb = 0
[ 1123.880827]        gim info:(parse_config_file:295) AMD GIM sched_interval = 7
[ 1123.880828]        gim info:(parse_config_file:295) AMD GIM fb_clear = 1
[ 1123.880829]        gim info:(parse_config_file:295) AMD GIM hang_detect_timeout = 100
[ 1123.880831]        gim info:(parse_config_file:295) AMD GIM max_quanta = 1000
[ 1123.880832]        gim info:(parse_config_file:295) AMD GIM self_switch = 500
[ 1123.880833]        gim info:(parse_config_file:295) AMD GIM exclusive = 1600
[ 1123.880834]        gim info:(parse_config_file:295) AMD GIM fair_scheduling = 0
[ 1123.880835]        gim info:(parse_config_file:295) AMD GIM debug_level = 3
[ 1123.880837]        gim info:(parse_config_file:295) AMD GIM clear_fb_on_flr = 0
[ 1123.880838]        gim info:(parse_config_file:295) AMD GIM clear_fb_on_free_vf = 1
[ 1123.880839]        gim info:(init_config:445) INIT CONFIG
[ 1123.890809]        gim error:(gim_probe:123) gim_probe(06:00.0)
[ 1123.890822]        gim info:(alloc_adapter:454) allocate adapter for PF 0x0600
[ 1123.890823]        gim info:(alloc_adapter:457) Found free adapter at index 0
[ 1123.890829] PF0    gim info:(SetNewAdapter:1096) curr allocated at 00000000d08994a5
[ 1123.890830] PF0    gim info:(SetNewAdapter:1102) Can't disable ATS --&gt; Not enabled in the first place
[ 1123.890831] PF0    gim info:(SetNewAdapter:1113) SRIOV is supported
[ 1123.890831] PF0    gim info:(SetNewAdapter:1121) found PCI bridge device
[ 1123.890832] PF0    gim info:(SetNewAdapter:1124) found: 05:8.0
[ 1123.890979] PF0    gim info:(SetNewAdapter:1147) mmio_base = 000000007da02c16
[ 1123.891597] PF0    gim info:(SetNewAdapter:1149) doorbell = 00000000c74e7207
[ 1123.981443] PF0    gim info:(SetNewAdapter:1151) pf.fb_va = 000000009a0d3e40
[ 1123.981469]        gim info:(sriov_is_ari_enabled:180) PCI_SRIOV_CAP = 0x00000002
[ 1123.981470]        gim info:(sriov_is_ari_enabled:190) PCI_SRIOV_CTRL = 0x00000010
[ 1123.981471]        gim info:(sriov_is_ari_enabled:194) PCI_SRIOV_CTRL_ARI is set --&gt; ARI is supported
[ 1123.981474] PF0    gim info:(program_ari_mode:957) Read bif_strap8 = 0x00200004
[ 1123.981474] PF0    gim info:(program_ari_mode:963) program_ari_mode - Set ARI_Mode = PF_BUS
[ 1123.981475] PF0    gim info:(program_ari_mode:978) Write bif_strap8 = 0x00000004
[ 1123.981476] PF0    gim info:(gim_read_rom_from_reg:634) Reading VBios from ROM
[ 1123.981594] PF0    gim info:(gim_read_VBIOS:695) VBIOS starts:  0x55, 0xaa
[ 1123.981595] PF0    gim info:(gim_read_VBIOS:698) VBios size is 0x10000
[ 1123.981601] PF0    gim info:(gim_read_VBIOS:708) pVBIOS allocated at 00000000e96a70db for size of 0x80000
[ 1123.981602] PF0    gim info:(gim_read_rom_from_reg:634) Reading VBios from ROM
[ 1125.088134] PF0    gim info:(gim_read_VBIOS:718) BIOS Version Major 0xF Minor 0x31
[ 1125.088210] PF0    gim info:(gim_read_VBIOS:729) VBios Checksum = 0x541c00
[ 1125.088211] PF0    gim info:(gim_read_VBIOS:738) Valid video BIOS image, size = 0x10000, check sum is 0x541c00
[ 1125.088212] PF0    gim info:(gim_read_VBIOS:739) Read in full Vbios image of size = 0x80000
[ 1125.088266] PF0    gim info:(gim_post_VBIOS:776) Init Parser passed!, continue
[ 1125.088269] &lt;1&gt;ATOM_CheckAsicStatus - BIOS_SCRATCH_7 = 0x00000000
[ 1125.088269] &lt;1&gt;  Isolate ATOM_S7_ASIC_INIT_COMPLETE_MASK bit(s) = 0x00000000
[ 1125.088271] &lt;1&gt;  RLC_CNTL = 0x00000000
[ 1125.088271] &lt;1&gt;  Isolate RLC_CNTL__RLC_ENABLE_F32_MASK = 0x00000000
[ 1125.088272] &lt;1&gt;ATOM_ASIC_NEED_POST
[ 1125.088273] PF0    gim info:(gim_post_VBIOS:795) Asic needs a VBios post
[ 1125.088274]        gim info:(ATOM_PostVBIOS:215) ATOM_PostVBIOS: FirmwareInfo passed
[ 1125.088275]        gim info:(ATOM_PostVBIOS:261) ATOM_PostVBIOS: ASIC_Init before, engine clock = 7530, memory clock =1e848
[ 1125.412963]        gim info:(ATOM_PostVBIOS:263) ATOM_PostVBIOS: ASIC_Init after
[ 1125.412964]        gim info:(ATOM_PostVBIOS:273) ATOM_PostVBIOS: ATOM_InitFanCntl before
[ 1125.412965]        gim info:(ATOM_PostVBIOS:275) ATOM_PostVBIOS: ATOM_InitFanCntl after
[ 1125.412965] PF0    gim info:(gim_post_VBIOS:801) Post INIT_ASIC successfully!
[ 1125.412977]        gim warning:(firmware_requires_update:473) SMU option ROM version 0x111700 versus patch version 0x111a00
[ 1125.412989]        gim warning:(firmware_requires_update:486) RLCV option ROM version 113. Patch version 1
[ 1125.412989]        gim info:(firmware_requires_update:495) TOC found, update it
[ 1125.412990]        gim info:(patch_firmware:549) Update SMC_Init table
[ 1125.414871]        gim warning:(patch_firmware:574) Update smu firmware
[ 1125.416014]        gim warning:(patch_firmware:582) Update RLCV firmware
[ 1125.416083]        gim warning:(patch_firmware:590) Update TOC
[ 1125.416520]        gim info:(func_recalc_checksum:518) func_recalc_checksum original= 56
[ 1125.416550]        gim info:(func_recalc_checksum:522) func_recalc_checksum new= 89
[ 1125.416551] PF0    gim info:(gim_post_VBIOS:811) Asic needs firmware loaded
[ 1125.416551]        gim info:(ATOM_PostVBIOS:215) ATOM_PostVBIOS: FirmwareInfo passed
[ 1125.416552]        gim info:(ATOM_PostVBIOS:250) just load uCode
[ 1125.416553]        gim info:(ATOM_PostVBIOS:261) ATOM_PostVBIOS: ASIC_Init before, engine clock = 7530, memory clock =1e848
[ 1127.081802]        gim info:(ATOM_PostVBIOS:263) ATOM_PostVBIOS: ASIC_Init after
[ 1127.081803]        gim info:(ATOM_PostVBIOS:273) ATOM_PostVBIOS: ATOM_InitFanCntl before
[ 1127.081803]        gim info:(ATOM_PostVBIOS:275) ATOM_PostVBIOS: ATOM_InitFanCntl after
[ 1127.081805] PF0    gim info:(gim_post_VBIOS:817) Post LOAD_FW successfully!
[ 1127.081805] PF0    gim info:(gim_post_VBIOS:818) Post VBIOS successfully!
[ 1127.082653]        gim info:(enable_thermal_control:643) Thermal Control Enable
[ 1127.082655] PF0    gim info:(SetNewAdapter:1207) gim_post_VBIOS done
[ 1127.082656] PF0    gim info:(SetNewAdapter:1248) Scheduler Time interval set to 7 msec
[ 1127.082659]        gim info:(EnableSriov:398) Enable SRIOV
[ 1127.082659]        gim info:(EnableSriov:399) Enable SRIOV vfs count = 16
[ 1127.082689] gim 0000:06:00.0: not enough MMIO resources for SR-IOV
[ 1127.082702]        gim error:(EnableSriov:410) Fail to enable sriov, status = fffffff4
[ 1127.082711]        gim error:(SetNewAdapter:1263) Failed to properly enable SRIOV(map_image) !!!!
[ 1127.186274]        gim error:(gim_probe:126) Failed to create new adapter
[ 1127.186297] gim: probe of 0000:06:00.0 failed with error -1
[ 1127.186312]        gim error:(gim_probe:123) gim_probe(07:00.0)
[ 1127.186319]        gim info:(alloc_adapter:454) allocate adapter for PF 0x0700
[ 1127.186320]        gim info:(alloc_adapter:457) Found free adapter at index 0
[ 1127.186325] PF0    gim info:(SetNewAdapter:1096) curr allocated at 00000000d08994a5
[ 1127.186326] PF0    gim info:(SetNewAdapter:1102) Can't disable ATS --&gt; Not enabled in the first place
[ 1127.186327] PF0    gim info:(SetNewAdapter:1113) SRIOV is supported
[ 1127.186327] PF0    gim info:(SetNewAdapter:1121) found PCI bridge device
[ 1127.186328] PF0    gim info:(SetNewAdapter:1124) found: 05:10.0
[ 1127.186544] PF0    gim info:(SetNewAdapter:1147) mmio_base = 00000000de310274
[ 1127.187275] PF0    gim info:(SetNewAdapter:1149) doorbell = 00000000c74e7207
[ 1127.266496] PF0    gim info:(SetNewAdapter:1151) pf.fb_va = 000000009a0d3e40
[ 1127.266520]        gim info:(sriov_is_ari_enabled:180) PCI_SRIOV_CAP = 0x00000002
[ 1127.266521]        gim info:(sriov_is_ari_enabled:190) PCI_SRIOV_CTRL = 0x00000010
[ 1127.266522]        gim info:(sriov_is_ari_enabled:194) PCI_SRIOV_CTRL_ARI is set --&gt; ARI is supported
[ 1127.266524] PF0    gim info:(program_ari_mode:957) Read bif_strap8 = 0x00200004
[ 1127.266525] PF0    gim info:(program_ari_mode:963) program_ari_mode - Set ARI_Mode = PF_BUS
[ 1127.266526] PF0    gim info:(program_ari_mode:978) Write bif_strap8 = 0x00000004
[ 1127.266526] PF0    gim info:(gim_read_rom_from_reg:634) Reading VBios from ROM
[ 1127.266655] PF0    gim info:(gim_read_VBIOS:695) VBIOS starts:  0x55, 0xaa
[ 1127.266658] PF0    gim info:(gim_read_VBIOS:698) VBios size is 0x10000
[ 1127.266729] PF0    gim info:(gim_read_VBIOS:708) pVBIOS allocated at 00000000e96a70db for size of 0x80000
[ 1127.266730] PF0    gim info:(gim_read_rom_from_reg:634) Reading VBios from ROM
[ 1128.371441] PF0    gim info:(gim_read_VBIOS:718) BIOS Version Major 0xF Minor 0x31
[ 1128.371519] PF0    gim info:(gim_read_VBIOS:729) VBios Checksum = 0x541c00
[ 1128.371520] PF0    gim info:(gim_read_VBIOS:738) Valid video BIOS image, size = 0x10000, check sum is 0x541c00
[ 1128.371520] PF0    gim info:(gim_read_VBIOS:739) Read in full Vbios image of size = 0x80000
[ 1128.371575] PF0    gim info:(gim_post_VBIOS:776) Init Parser passed!, continue
[ 1128.371579] &lt;1&gt;ATOM_CheckAsicStatus - BIOS_SCRATCH_7 = 0x00000000
[ 1128.371579] &lt;1&gt;  Isolate ATOM_S7_ASIC_INIT_COMPLETE_MASK bit(s) = 0x00000000
[ 1128.371581] &lt;1&gt;  RLC_CNTL = 0x00000000
[ 1128.371581] &lt;1&gt;  Isolate RLC_CNTL__RLC_ENABLE_F32_MASK = 0x00000000
[ 1128.371582] &lt;1&gt;ATOM_ASIC_NEED_POST
[ 1128.371582] PF0    gim info:(gim_post_VBIOS:795) Asic needs a VBios post
[ 1128.371583]        gim info:(ATOM_PostVBIOS:215) ATOM_PostVBIOS: FirmwareInfo passed
[ 1128.371584]        gim info:(ATOM_PostVBIOS:261) ATOM_PostVBIOS: ASIC_Init before, engine clock = 7530, memory clock =1e848
[ 1128.696397]        gim info:(ATOM_PostVBIOS:263) ATOM_PostVBIOS: ASIC_Init after
[ 1128.696398]        gim info:(ATOM_PostVBIOS:273) ATOM_PostVBIOS: ATOM_InitFanCntl before
[ 1128.696399]        gim info:(ATOM_PostVBIOS:275) ATOM_PostVBIOS: ATOM_InitFanCntl after
[ 1128.696400] PF0    gim info:(gim_post_VBIOS:801) Post INIT_ASIC successfully!
[ 1128.696412]        gim warning:(firmware_requires_update:473) SMU option ROM version 0x111700 versus patch version 0x111a00
[ 1128.696424]        gim warning:(firmware_requires_update:486) RLCV option ROM version 113. Patch version 1
[ 1128.696424]        gim info:(firmware_requires_update:495) TOC found, update it
[ 1128.696425]        gim info:(patch_firmware:549) Update SMC_Init table
[ 1128.698220]        gim warning:(patch_firmware:574) Update smu firmware
[ 1128.699381]        gim warning:(patch_firmware:582) Update RLCV firmware
[ 1128.699450]        gim warning:(patch_firmware:590) Update TOC
[ 1128.699882]        gim info:(func_recalc_checksum:518) func_recalc_checksum original= 56
[ 1128.699911]        gim info:(func_recalc_checksum:522) func_recalc_checksum new= 89
[ 1128.699912] PF0    gim info:(gim_post_VBIOS:811) Asic needs firmware loaded
[ 1128.699912]        gim info:(ATOM_PostVBIOS:215) ATOM_PostVBIOS: FirmwareInfo passed
[ 1128.699913]        gim info:(ATOM_PostVBIOS:250) just load uCode
[ 1128.699914]        gim info:(ATOM_PostVBIOS:261) ATOM_PostVBIOS: ASIC_Init before, engine clock = 7530, memory clock =1e848
[ 1130.370214]        gim info:(ATOM_PostVBIOS:263) ATOM_PostVBIOS: ASIC_Init after
[ 1130.370215]        gim info:(ATOM_PostVBIOS:273) ATOM_PostVBIOS: ATOM_InitFanCntl before
[ 1130.370216]        gim info:(ATOM_PostVBIOS:275) ATOM_PostVBIOS: ATOM_InitFanCntl after
[ 1130.370217] PF0    gim info:(gim_post_VBIOS:817) Post LOAD_FW successfully!
[ 1130.370217] PF0    gim info:(gim_post_VBIOS:818) Post VBIOS successfully!
[ 1130.370976]        gim info:(enable_thermal_control:643) Thermal Control Enable
[ 1130.370977] PF0    gim info:(SetNewAdapter:1207) gim_post_VBIOS done
[ 1130.370978] PF0    gim info:(SetNewAdapter:1248) Scheduler Time interval set to 7 msec
[ 1130.370980]        gim info:(EnableSriov:398) Enable SRIOV
[ 1130.370981]        gim info:(EnableSriov:399) Enable SRIOV vfs count = 16
[ 1130.370987] gim 0000:07:00.0: not enough MMIO resources for SR-IOV
[ 1130.370997]        gim error:(EnableSriov:410) Fail to enable sriov, status = fffffff4
[ 1130.371005]        gim error:(SetNewAdapter:1263) Failed to properly enable SRIOV(map_image) !!!!
[ 1130.474928]        gim error:(gim_probe:126) Failed to create new adapter
[ 1130.474958] gim: probe of 0000:07:00.0 failed with error -1
[ 1130.475210]        gim info:(gim_ioctl_init:567) IOCTL device created and ready for use
[ 1130.475211] Running Kaveri version of GIM

</code></pre>
]]></description><link>https://xcp-ng.org/forum/post/29974</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29974</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Tue, 11 Aug 2020 20:34:20 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Tue, 11 Aug 2020 20:32:24 GMT]]></title><description><![CDATA[<p dir="auto">SR-IOV is on, I wasn't able to find any count. What would it be under?<br />
<img src="/forum/assets/uploads/files/1597177156999-bab74e13-4cf6-41a7-85fa-eab0e60450d3-image.png" alt="bab74e13-4cf6-41a7-85fa-eab0e60450d3-image.png" class=" img-fluid img-markdown" /></p>
<p dir="auto">lspci -k:</p>
<pre><code>
00:00.0 Host bridge: Intel Corporation Xeon E5/Core i7 DMI2 (rev 07)
        Subsystem: Dell Device 048c
00:01.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 1a (rev 07)
        Kernel driver in use: pcieport
00:02.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 2a (rev 07)
        Kernel driver in use: pcieport
00:02.2 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 2c (rev 07)
        Kernel driver in use: pcieport
00:03.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 3a in PCI Express Mode (rev 07)
        Kernel driver in use: pcieport
00:03.2 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 3c (rev 07)
        Kernel driver in use: pcieport
00:04.0 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 0 (rev 07)
        Subsystem: Dell Device 048c
        Kernel driver in use: ioatdma
00:04.1 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 1 (rev 07)
        Subsystem: Dell Device 048c
        Kernel driver in use: ioatdma
00:04.2 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 2 (rev 07)
        Subsystem: Dell Device 048c
        Kernel driver in use: ioatdma
00:04.3 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 3 (rev 07)
        Subsystem: Dell Device 048c
        Kernel driver in use: ioatdma
00:04.4 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 4 (rev 07)
        Subsystem: Dell Device 048c
        Kernel driver in use: ioatdma
00:04.5 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 5 (rev 07)
        Subsystem: Dell Device 048c
        Kernel driver in use: ioatdma
00:04.6 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 6 (rev 07)
        Subsystem: Dell Device 048c
        Kernel driver in use: ioatdma
00:04.7 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 7 (rev 07)
        Subsystem: Dell Device 048c
        Kernel driver in use: ioatdma
00:05.0 System peripheral: Intel Corporation Xeon E5/Core i7 Address Map, VTd_Misc, System Management (rev 07)
        Subsystem: Dell Device 048c
00:05.2 System peripheral: Intel Corporation Xeon E5/Core i7 Control Status and Global Errors (rev 07)
        Subsystem: Dell Device 048c
00:11.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Virtual Root Port (rev 05)
        Kernel driver in use: pcieport
00:16.0 Communication controller: Intel Corporation C600/X79 series chipset MEI Controller #1 (rev 05)
        Subsystem: Dell Device 048c
        Kernel modules: mei_me
00:16.1 Communication controller: Intel Corporation C600/X79 series chipset MEI Controller #2 (rev 05)
        Subsystem: Dell Device 048c
00:1a.0 USB controller: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #2 (rev 05)
        Subsystem: Dell Device 048c
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci
00:1c.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Root Port 1 (rev b5)
        Kernel driver in use: pcieport
00:1c.7 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Root Port 8 (rev b5)
        Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #1 (rev 05)
        Subsystem: Dell Device 048c
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation C600/X79 series chipset LPC Controller (rev 05)
        Subsystem: Dell Device 048c
        Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller (rev 05)
        Subsystem: Dell Device 048c
        Kernel driver in use: ahci
        Kernel modules: ahci
01:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
        Subsystem: Dell Gigabit 4P I350-t rNDC
        Kernel driver in use: igb
        Kernel modules: igb
01:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
        Subsystem: Dell Gigabit 4P I350-t rNDC
        Kernel driver in use: igb
        Kernel modules: igb
01:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
        Subsystem: Dell Gigabit 4P I350-t rNDC
        Kernel driver in use: igb
        Kernel modules: igb
01:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
        Subsystem: Dell Gigabit 4P I350-t rNDC
        Kernel driver in use: igb
        Kernel modules: igb
02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2208 [Thunderbolt] (rev 05)
        Subsystem: Dell PERC H710P Mini (for monolithics)
        Kernel driver in use: megaraid_sas
        Kernel modules: megaraid_sas
04:00.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
        Kernel driver in use: pcieport
05:08.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
        Kernel driver in use: pcieport
05:10.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
        Kernel driver in use: pcieport
06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XT GL [FirePro S7150]
        Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0334
07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga XT GL [FirePro S7150]
        Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0334
0b:00.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe Switch [PS]
        Kernel driver in use: pcieport
0c:00.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe Switch [PS]
        Kernel driver in use: pcieport
0c:01.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe Switch [PS]
        Kernel driver in use: pcieport
0d:00.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe-PCI Bridge [PPB]
0e:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. G200eR2
        Subsystem: Dell Device 048c
3f:08.0 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:09.0 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0a.0 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0a.1 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0a.2 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 2 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0a.3 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 3 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0b.0 System peripheral: Intel Corporation Xeon E5/Core i7 Interrupt Control Registers (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0b.3 System peripheral: Intel Corporation Xeon E5/Core i7 Semaphore and Scratchpad Configuration Registers (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0c.0 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0c.1 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0c.2 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0c.3 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0c.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller System Address Decoder 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0c.7 System peripheral: Intel Corporation Xeon E5/Core i7 System Address Decoder (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0d.0 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0d.1 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0d.2 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0d.3 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0d.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller System Address Decoder 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0e.0 System peripheral: Intel Corporation Xeon E5/Core i7 Processor Home Agent (rev 07)
        Subsystem: Dell Device 048c
3f:0e.1 Performance counters: Intel Corporation Xeon E5/Core i7 Processor Home Agent Performance Monitoring (rev 07)
        Subsystem: Dell Device 048c
3f:0f.0 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Registers (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0f.1 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller RAS Registers (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0f.2 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0f.3 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0f.4 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 2 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0f.5 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 3 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:0f.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 4 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:10.0 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:10.1 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:10.2 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:10.3 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:10.4 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 2 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:10.5 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 3 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:10.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 2 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:10.7 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 3 (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:11.0 System peripheral: Intel Corporation Xeon E5/Core i7 DDRIO (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:13.0 System peripheral: Intel Corporation Xeon E5/Core i7 R2PCIe (rev 07)
        Subsystem: Intel Corporation Device 0000
3f:13.1 Performance counters: Intel Corporation Xeon E5/Core i7 Ring to PCI Express Performance Monitor (rev 07)
        Subsystem: Dell Device 048c
3f:13.4 Performance counters: Intel Corporation Xeon E5/Core i7 QuickPath Interconnect Agent Ring Registers (rev 07)
        Subsystem: Dell Device 048c
3f:13.5 Performance counters: Intel Corporation Xeon E5/Core i7 Ring to QuickPath Interconnect Link 0 Performance Monitor (rev 07)
        Subsystem: Dell Device 048c
3f:13.6 System peripheral: Intel Corporation Xeon E5/Core i7 Ring to QuickPath Interconnect Link 1 Performance Monitor (rev 07)
        Subsystem: Dell Device 048c
40:01.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 1a (rev 07)
        Kernel driver in use: pcieport
40:02.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 2a (rev 07)
        Kernel driver in use: pcieport
40:03.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 3a in PCI Express Mode (rev 07)
        Kernel driver in use: pcieport
40:03.2 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 3c (rev 07)
        Kernel driver in use: pcieport
40:04.0 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
        Kernel driver in use: ioatdma
40:04.1 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
        Kernel driver in use: ioatdma
40:04.2 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 2 (rev 07)
        Subsystem: Intel Corporation Device 0000
        Kernel driver in use: ioatdma
40:04.3 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 3 (rev 07)
        Subsystem: Intel Corporation Device 0000
        Kernel driver in use: ioatdma
40:04.4 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 4 (rev 07)
        Subsystem: Intel Corporation Device 0000
        Kernel driver in use: ioatdma
40:04.5 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 5 (rev 07)
        Subsystem: Intel Corporation Device 0000
        Kernel driver in use: ioatdma
40:04.6 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 6 (rev 07)
        Subsystem: Intel Corporation Device 0000
        Kernel driver in use: ioatdma
40:04.7 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 7 (rev 07)
        Subsystem: Intel Corporation Device 0000
        Kernel driver in use: ioatdma
40:05.0 System peripheral: Intel Corporation Xeon E5/Core i7 Address Map, VTd_Misc, System Management (rev 07)
        Subsystem: Dell Device 048c
40:05.2 System peripheral: Intel Corporation Xeon E5/Core i7 Control Status and Global Errors (rev 07)
        Subsystem: Dell Device 048c
43:00.0 Ethernet controller: Chelsio Communications Inc T320 10GbE Dual Port Adapter
        Subsystem: Chelsio Communications Inc Device 0001
        Kernel driver in use: cxgb3
        Kernel modules: cxgb3
44:00.0 Ethernet controller: Intel Corporation Ethernet 10G 2P X520 Adapter (rev 01)
        Subsystem: Intel Corporation 10GbE 2P X520 Adapter
        Kernel driver in use: ixgbe
        Kernel modules: ixgbe
44:00.1 Ethernet controller: Intel Corporation Ethernet 10G 2P X520 Adapter (rev 01)
        Subsystem: Intel Corporation 10GbE 2P X520 Adapter
        Kernel driver in use: ixgbe
        Kernel modules: ixgbe
7f:08.0 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:09.0 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0a.0 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0a.1 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0a.2 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 2 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0a.3 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 3 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0b.0 System peripheral: Intel Corporation Xeon E5/Core i7 Interrupt Control Registers (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0b.3 System peripheral: Intel Corporation Xeon E5/Core i7 Semaphore and Scratchpad Configuration Registers (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0c.0 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0c.1 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0c.2 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0c.3 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0c.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller System Address Decoder 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0c.7 System peripheral: Intel Corporation Xeon E5/Core i7 System Address Decoder (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0d.0 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0d.1 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0d.2 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0d.3 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0d.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller System Address Decoder 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0e.0 System peripheral: Intel Corporation Xeon E5/Core i7 Processor Home Agent (rev 07)
        Subsystem: Dell Device 048c
7f:0e.1 Performance counters: Intel Corporation Xeon E5/Core i7 Processor Home Agent Performance Monitoring (rev 07)
        Subsystem: Dell Device 048c
7f:0f.0 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Registers (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0f.1 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller RAS Registers (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0f.2 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0f.3 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0f.4 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 2 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0f.5 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 3 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:0f.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 4 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:10.0 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:10.1 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:10.2 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 0 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:10.3 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 1 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:10.4 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 2 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:10.5 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 3 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:10.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 2 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:10.7 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 3 (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:11.0 System peripheral: Intel Corporation Xeon E5/Core i7 DDRIO (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:13.0 System peripheral: Intel Corporation Xeon E5/Core i7 R2PCIe (rev 07)
        Subsystem: Intel Corporation Device 0000
7f:13.1 Performance counters: Intel Corporation Xeon E5/Core i7 Ring to PCI Express Performance Monitor (rev 07)
        Subsystem: Dell Device 048c
7f:13.4 Performance counters: Intel Corporation Xeon E5/Core i7 QuickPath Interconnect Agent Ring Registers (rev 07)
        Subsystem: Dell Device 048c
7f:13.5 Performance counters: Intel Corporation Xeon E5/Core i7 Ring to QuickPath Interconnect Link 0 Performance Monitor (rev 07)
        Subsystem: Dell Device 048c
7f:13.6 System peripheral: Intel Corporation Xeon E5/Core i7 Ring to QuickPath Interconnect Link 1 Performance Monitor (rev 07)
        Subsystem: Dell Device 048c

</code></pre>
]]></description><link>https://xcp-ng.org/forum/post/29973</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29973</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Tue, 11 Aug 2020 20:32:24 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Tue, 11 Aug 2020 03:11:02 GMT]]></title><description><![CDATA[<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/forum/user/tbluml" aria-label="Profile: tbluml">@<bdi>tbluml</bdi></a> can you share <code># lspci -k</code> and <code> # dmesg</code>? Also, is SR-IOV enabled in BIOS and does it have any count specified there?</p>
]]></description><link>https://xcp-ng.org/forum/post/29913</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29913</guid><dc:creator><![CDATA[r1]]></dc:creator><pubDate>Tue, 11 Aug 2020 03:11:02 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Mon, 10 Aug 2020 22:30:11 GMT]]></title><description><![CDATA[<p dir="auto">I have no idea. <a class="plugin-mentions-user plugin-mentions-a" href="/forum/user/r1" aria-label="Profile: r1">@<bdi>r1</bdi></a> does it ring any bell?</p>
]]></description><link>https://xcp-ng.org/forum/post/29905</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29905</guid><dc:creator><![CDATA[olivierlambert]]></dc:creator><pubDate>Mon, 10 Aug 2020 22:30:11 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Mon, 10 Aug 2020 19:27:02 GMT]]></title><description><![CDATA[<p dir="auto">This is the driver you are talking about, correct?<br />
<img src="/forum/assets/uploads/files/1597087220037-25c8af3e-2c77-449e-9326-07196f9b01cc-image.png" alt="25c8af3e-2c77-449e-9326-07196f9b01cc-image.png" class=" img-fluid img-markdown" /></p>
<p dir="auto">Unfortunately, I installed the new update, and I have been greeted with the same error.<br />
<img src="/forum/assets/uploads/files/1597087347410-43ae5f45-c7b5-44a9-b230-7c9b3c7c6e7d-image.png" alt="43ae5f45-c7b5-44a9-b230-7c9b3c7c6e7d-image.png" class=" img-fluid img-markdown" /><br />
What could the bottom prompt ("The selected virtual GPU type does not support multiple instances.") mean? Could that be a clue about how the driver/XCPng is not behaving how it should?<br />
<img src="/forum/assets/uploads/files/1597087474364-a8139806-bc74-420b-97b9-5a3dbe1d18a6-image.png" alt="a8139806-bc74-420b-97b9-5a3dbe1d18a6-image.png" class=" img-fluid img-markdown" /><br />
The driver was installed the same way that was advised in the wiki article. Am I doing something wrong? Could it be an issue with the driver/hardware?</p>
<p dir="auto">I greatly appreciate your assistance, <a class="plugin-mentions-user plugin-mentions-a" href="/forum/user/olivierlambert" aria-label="Profile: olivierlambert">@<bdi>olivierlambert</bdi></a>! Thank you again!</p>
]]></description><link>https://xcp-ng.org/forum/post/29900</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29900</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Mon, 10 Aug 2020 19:27:02 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Sun, 09 Aug 2020 10:44:17 GMT]]></title><description><![CDATA[<p dir="auto">Download Citrix XenServer from AMD's Drivers &amp; Support page (version 2.0 for XenServer 8.1)</p>
]]></description><link>https://xcp-ng.org/forum/post/29867</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29867</guid><dc:creator><![CDATA[olivierlambert]]></dc:creator><pubDate>Sun, 09 Aug 2020 10:44:17 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Sat, 08 Aug 2020 19:46:57 GMT]]></title><description><![CDATA[<p dir="auto">Sounds great! I will get 8.1 reinstalled. Do you happen to know where it can be found/do you have a link by chance?</p>
]]></description><link>https://xcp-ng.org/forum/post/29863</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29863</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Sat, 08 Aug 2020 19:46:57 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Sat, 08 Aug 2020 19:14:01 GMT]]></title><description><![CDATA[<p dir="auto">Driver for XCP-ng 8.1</p>
]]></description><link>https://xcp-ng.org/forum/post/29859</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29859</guid><dc:creator><![CDATA[olivierlambert]]></dc:creator><pubDate>Sat, 08 Aug 2020 19:14:01 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Sat, 08 Aug 2020 19:06:42 GMT]]></title><description><![CDATA[<p dir="auto">Host driver, or XCP-ng version?</p>
]]></description><link>https://xcp-ng.org/forum/post/29858</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29858</guid><dc:creator><![CDATA[tbluml]]></dc:creator><pubDate>Sat, 08 Aug 2020 19:06:42 GMT</pubDate></item><item><title><![CDATA[Reply to Firepro S7150x2 SR-IOV Errors on Sat, 08 Aug 2020 19:05:24 GMT]]></title><description><![CDATA[<p dir="auto">There's a new one available since few days</p>
]]></description><link>https://xcp-ng.org/forum/post/29856</link><guid isPermaLink="true">https://xcp-ng.org/forum/post/29856</guid><dc:creator><![CDATA[olivierlambert]]></dc:creator><pubDate>Sat, 08 Aug 2020 19:05:24 GMT</pubDate></item></channel></rss>