<![CDATA[IP Address Configuration (does this exist in XOA?)]]>I am currently setting up a server using xcp-ng and XOA. I have used XenCenter and xcp-Center for a long time and have come to rely on the Networking section of the Host panel, under IP Address Configuration. I regularly configure extra IPs on specific interfaces, but can't seem to find this functionality under XOA.

  • Is it hidden in the interface?
  • If not, can it be added as a feature?
  • If not, can documentation be added showing how this is done by CLI (or xo-cli, preferably).

I would like to move to XOA for all provisioning from end-to-end (CLI is fine as well, just no more xcp-center).

I saw a similar request exists from 2 years ago, but no resolution:
https://xcp-ng.org/forum/topic/3837/how-to-set-ip-for-storage-on-each-server

I can see these IP addresses on other hosts that were configured with xcp-center, but I cannot add new ones.

Thanks very much for any guidance!

121b481c-e0ad-4e74-ba27-00bc341b6c10-image.png

]]>https://xcp-ng.org/forum/topic/6324/ip-address-configuration-does-this-exist-in-xoaRSS for NodeFri, 11 Sep 2026 07:04:28 GMTWed, 14 Sep 2022 19:28:02 GMT60<![CDATA[Reply to IP Address Configuration (does this exist in XOA?) on Wed, 14 Sep 2022 22:50:22 GMT]]>It is in the same place in XO. Network tab of the host.

Change the Mode from None to Static (or DHCP). This should get you a pop up to enter the address, netmask, etc.

]]>https://xcp-ng.org/forum/post/52949https://xcp-ng.org/forum/post/52949Wed, 14 Sep 2022 22:50:22 GMT