@r1 Thank you so much for your reply. I really am glad that you are looking at this issue. Totally appreciate your help.

The thing is, I followed this walk-through to the T. https://github.com/xcp-ng/xcp/wiki/PCI-Passtrough

And I run

xl pci-assignable-list
0000:01:00.0   <- VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Polaris 22 XT [Radeon RX Vega M GH] (rev c0)
0000:01:00.1   <- Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Polaris 22 HDMI Audio

However, when I try to start the VM in question, I get the following error:

"Failed","Starting VM 'Wind'
Internal error: xenopsd internal error: Device.PCI.Cannot_add(_, _)
Time: 00:00:04","TestLab","Feb 3, 2020 1:34 PM"

Please let me know if there are any logs that I could add here to help figure out what the problem is.

All the best,
Amanda

Good day,

Apologies if this question was asked before. I tried searching but to no avail.

The Hades Canyon comes with both the Intel HD 630 graphics chipset along with AMD's Radeon Vega M GH one.

I have XCP-NG 8.0 installed and it seems that there are no drivers for the Radeon graphics as I cannot add it to be passed through to a VM.

I believe at this stage that the kernel needs the driver to be installed there first before being able to pass it through (please correct me if I am wrong).

I noticed that the same question was asked on Ubuntu forums here https://ubuntuforums.org/showthread.php?t=2400400&page=2 and I believe if it is there fore Ubuntu, it should be more-or-less available for a CentOS dervied XCP-NG, right ?

I would totally appreciate any pointers on how to get the AMD graphics passed through to VMs.

All the best,
Amanda