-
@Maelstrom96 I'm not sure to have a solution, we use VHDs on the top of the LVM/DRBD layer, so only vhd-util + linstor commands are required on our side to backup/snap data.
-
UPDATE AND IMPORTANT INFO I am updating the LINSTOR packages on our repositories.
This update fixes many issues, especially regarding the HA.However, this update is not compatible with the LINSTOR SRs already configured, so it is necessary to DELETE the existing SRs before installing this update.
We exceptionally allow ourselves to force a reinstallation during this beta, as long as we haven't officially released a production version.
In theory, this should not happen again.To resume:
1 - Uninstall any existing LINSTOR SR.
2 - Install the new sm package: "sm-2.30.7-1.3.0.linstor.3.xcpng8.2.x86_64" on all used hosts.
3 - Reinstall the LINSTOR SR.Thank you !
-
@ronan-a I've checked the commit history and saw that the breaking change seems to be related to the renaming of the KV store. Also just noticed that you renamed the volume namespace. Is there any other breaking changes that would require the deletion of the SR in order to update the sm package?
I've made a python code that makes a copy of all the old KV data to the new KV name, along with renaming the key names for the volume data and was wondering if that would be sufficient.
Thanks,
-
@Maelstrom96 There are two important changes yes: the renaming of the KV store and the XCP volume namespace. In theory you can copy the data of your old KV store to the new one, it should be enough.
However I prefer to be sure that all those who test the driver use a stable version with a new SR to avoid surprises that I would have forgotten. In practice, if you haven't had any problems, a migration script may suffice.
Also, you must be sure there is no running tasks like snapshots, coalesce, etc. Otherwise you can have trouble during the update.
-
@ronan-a Perfect, thanks a lot for your input
-
Is there a way to remove Linstor / XOSTOR entirely? I've been experimenting a little bit with the latest update and it looks like it takes a really really long time to run VMs on the shared SR created by XOSTOR and mass VM creation (tested with 6 VMs using terraform) also fails with "code":"TOO_MANY_STORAGE_MIGRATES","params":["3"]
-
Or reprovision it? I removed the SR from the XOA but the actual disk still seems to have the filesystem intact. Also I was running the XOSTOR as the HA SR. Maybe that caused it to become really slow and also I had the affinity set to disabled
-
I'm also seeing this in the xcp-rrdd-plugins.log:
Nov 12 03:49:42 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:49:57 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:50:12 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:50:27 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:50:37 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:50:52 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:51:07 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:51:22 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:51:33 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:51:48 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:52:03 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:52:18 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:52:28 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:52:43 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:52:58 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:53:13 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:53:23 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:53:38 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:53:53 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:54:08 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:54:18 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:54:33 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:54:48 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:55:03 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:55:13 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:55:28 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:55:43 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:55:58 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:56:09 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:56:24 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:56:39 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:56:54 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:57:04 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:57:19 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:57:34 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:57:49 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:57:59 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:58:14 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:58:29 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:58:44 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:58:54 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:59:09 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:59:24 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:59:39 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 03:59:49 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 04:00:04 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 04:00:20 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 04:00:35 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 04:00:45 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 04:01:00 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 04:01:15 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 04:01:30 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 04:01:40 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds... Nov 12 04:01:55 xcp-ng-node-1 xcp-rrdd-gpumon: [error||0 ||xcp-rrdd-gpumon] Unexpected error (Failure "not enough memory"), sleeping for 10 seconds...Not sure if its related
-
@TheiLLeniumStudios said in XOSTOR hyperconvergence preview:
Is there a way to remove Linstor / XOSTOR entirely?
If you destroyed the SR, you can remove the linstor packages and force a reinstallation of a stable sm package using
yum.I've been experimenting a little bit with the latest update and it looks like it takes a really really long time to run VMs on the shared SR created by XOSTOR and mass VM creation (tested with 6 VMs using terraform)
What do you mean? What's the performance problem? When the VM starts ? During execution?
also fails with "code":"TOO_MANY_STORAGE_MIGRATES","params":["3"]
Do you migrate with XO? Because this exception is normally handled by it, and a new migration is restarted a few moment later in this case.
Or reprovision it? I removed the SR from the XOA but the actual disk still seems to have the filesystem intact.
Did you just execute a
xe sr-forgetcommand on the SR? In this case the volumes are not removed.xe sr-destroymust be used to remove the volumes. So you can executexe sr-introduceand thenxe sr-destroyto clean your hosts.Also I was running the XOSTOR as the HA SR. Maybe that caused it to become really slow and also I had the affinity set to disabled
I'm not sure, (but the HA was buggy before the last update).
I'm also seeing this in the xcp-rrdd-plugins.log:
No relation with LINSTOR here.
-
Hey @ronan-a
I'm trying to remove the SR via XOA with "Remove this SR" button but im getting this error.SR_NOT_EMPTY()And there is no VM connected to it. So i tried to delete the disks manually in it but I get this error
SR_HAS_NO_PBDS(OpaqueRef:6d7520e0-60fa-4b93-9dfe-aa7ceb3b17d2)Could you help me how to remove it? I dont care about its content so any way is okay for me since I want to reinstall it after i install the updates.
-
@ronan-a said in XOSTOR hyperconvergence preview:
Did you just execute a xe sr-forget command on the SR? In this case the volumes are not removed. xe sr-destroy must be used to remove the volumes. So you can execute xe sr-introduce and then xe sr-destroy to clean your hosts.
I did it using XO interface. Now it doesn't show up and when I tried your suggestion of running xe sr-introduce, it just creates an "Unknown" SR and doesn't link it to the previous one. Running xe sr-create also doesn't help since that errors out with
LINSTOR SR creation error [opterr=LINSTOR SR must be unique in a pool]Can you elaborate the steps for reintroducing a lost SR that is backed by linstor? I ran this command:
xe sr-introduce type=linstor name-label=XOSTOR uuid=41ba4c11-8c13-30b3-fcbb-7668a39825a6The UUID is the original UUID of the XOSTOR SR which I found in my command history. And running xe sr-destroy after the above introduce leads to
The SR has no attached PBDs. My disks look like this at the moment:NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT drbd1016 147:1016 0 10G 0 disk drbd1014 147:1014 0 10G 0 disk sdb 8:16 0 238.5G 0 disk |-linstor_group-thin_device_tmeta 253:1 0 120M 0 lvm | `-linstor_group-thin_device-tpool 253:3 0 238.2G 0 lvm | |-linstor_group-xcp--persistent--redo--log_00000 253:10 0 260M 0 lvm | | `-drbd1002 147:1002 0 259.7M 0 disk | |-linstor_group-xcp--persistent--database_00000 253:8 0 1G 0 lvm | | `-drbd1000 147:1000 0 1G 0 disk /var/lib/linstor | |-linstor_group-thin_device 253:4 0 238.2G 0 lvm | |-linstor_group-xcp--volume--13a94a7a--d433--4426--8232--812e3c6dc52e_00000 253:11 0 10G 0 lvm | | `-drbd1004 147:1004 0 10G 0 disk | |-linstor_group-xcp--persistent--ha--statefile_00000 253:9 0 8M 0 lvm | | `-drbd1001 147:1001 0 8M 0 disk | |-linstor_group-xcp--volume--70bf80a2--a008--469a--a7db--0ea92fcfc392_00000 253:5 0 20M 0 lvm | | `-drbd1009 147:1009 0 20M 0 disk | `-linstor_group-xcp--volume--4b70d69b--9cca--4aa3--842f--09366ac76901_00000 253:12 0 10G 0 lvm | `-drbd1006 147:1006 0 10G 0 disk `-linstor_group-thin_device_tdata 253:2 0 238.2G 0 lvm `-linstor_group-thin_device-tpool 253:3 0 238.2G 0 lvm |-linstor_group-xcp--persistent--redo--log_00000 253:10 0 260M 0 lvm | `-drbd1002 147:1002 0 259.7M 0 disk |-linstor_group-xcp--persistent--database_00000 253:8 0 1G 0 lvm | `-drbd1000 147:1000 0 1G 0 disk /var/lib/linstor |-linstor_group-thin_device 253:4 0 238.2G 0 lvm |-linstor_group-xcp--volume--13a94a7a--d433--4426--8232--812e3c6dc52e_00000 253:11 0 10G 0 lvm | `-drbd1004 147:1004 0 10G 0 disk |-linstor_group-xcp--persistent--ha--statefile_00000 253:9 0 8M 0 lvm | `-drbd1001 147:1001 0 8M 0 disk |-linstor_group-xcp--volume--70bf80a2--a008--469a--a7db--0ea92fcfc392_00000 253:5 0 20M 0 lvm | `-drbd1009 147:1009 0 20M 0 disk `-linstor_group-xcp--volume--4b70d69b--9cca--4aa3--842f--09366ac76901_00000 253:12 0 10G 0 lvm `-drbd1006 147:1006 0 10G 0 disk drbd1012 147:1012 0 10G 0 disk tda 254:0 0 10G 0 disk drbd1015 147:1015 0 10G 0 disk drbd1005 147:1005 0 20M 0 disk sda 8:0 0 223.6G 0 disk |-sda4 8:4 0 512M 0 part /boot/efi |-sda2 8:2 0 18G 0 part |-sda5 8:5 0 4G 0 part /var/log |-sda3 8:3 0 182.1G 0 part | `-XSLocalEXT--712c1f83--d11f--ae07--d2b8--14a823761e6e-712c1f83--d11f--ae07--d2b8--14a823761e6e 253:0 0 182.1G 0 lvm /run/sr-mount/712c1f83-d11f-ae07-d2b8-14a823761e6e |-sda1 8:1 0 18G 0 part / `-sda6 8:6 0 1G 0 part [SWAP] tdb 254:1 0 50G 0 disk@ronan-a said in XOSTOR hyperconvergence preview:
What do you mean? What's the performance problem? When the VM starts ? During execution?
So, with XOSTOR created and making the Pool HA with that SR, whenever I created a new VM in that SR and not choose any affinity host, it takes atleast 10-15 minutes to run a migrate task which shouldn't be necessary because XOSTOR is shared right? Or is my assumption not correct? And once the job is done, it doesn't even start all the VMs and some even disappeared from XO. I was creating the VMs using terraform and it spun up 6 of them at a time and since the migrate task started for all of them, I saw the error TOO_MANY_STORAGE_MIGRATES. Not really sure what's going on.
I first thought it was my template VDI that wasn't on XOSTOR but I reuploaded the cloud image to XOSTOR but still got the same behavior. And I'm not even using spinning disks, 2 of hosts have NVMe drives and 1 of them involved in XOSTOR has an mSATA one
-
@TheiLLeniumStudios Better explanations, to reintroduce a LINSTOR SR, you can use these commands with you own parameters:
Generate a new SR UUID.
[10:18 r620-s1 ~]# uuidgen 345adcd2-aa2b-44ad-9c25-788cf870db72 [10:18 r620-s1 ~]# xe sr-introduce uuid=345adcd2-aa2b-44ad-9c25-788cf870db72 type=linstor name-label="XOSTOR" content-type=user 345adcd2-aa2b-44ad-9c25-788cf870db72 # Get host UUIDs. [10:18 r620-s1 ~]# xe host-list uuid ( RO) : 888254e8-da05-4f86-ad37-979b8d6bad04 name-label ( RW): R620-S2 name-description ( RW): Default install uuid ( RO) : c96ec4dd-28ac-4df4-b73c-4371bd202728 name-label ( RW): R620-S1 name-description ( RW): Default install uuid ( RO) : ddcd3461-7052-4f5e-932c-e1ed75c192d6 name-label ( RW): R620-S3 name-description ( RW): Default installCreate the PBDs using the same old config.
[10:19 r620-s1 ~]# xe pbd-create sr-uuid=345adcd2-aa2b-44ad-9c25-788cf870db72 host-uuid=c96ec4dd-28ac-4df4-b73c-4371bd202728 device-config:hosts=r620-s1,r620-s2,r620-s3 device-config:group-name=linstor_group/thin_device device-config:redundancy=2 device-config:provisioning=thin 1c5c030a-1823-d53a-d8df-6c50af6beb2b [10:19 r620-s1 ~]# xe pbd-create sr-uuid=345adcd2-aa2b-44ad-9c25-788cf870db72 host-uuid=888254e8-da05-4f86-ad37-979b8d6bad04 device-config:hosts=r620-s1,r620-s2,r620-s3 device-config:group-name=linstor_group/thin_device device-config:redundancy=2 device-config:provisioning=thin 4c5df60a-f96d-19c2-44b0-f5951388d502 [10:20 r620-s1 ~]# xe pbd-create sr-uuid=345adcd2-aa2b-44ad-9c25-788cf870db72 host-uuid=ddcd3461-7052-4f5e-932c-e1ed75c192d6 device-config:hosts=r620-s1,r620-s2,r620-s3 device-config:group-name=linstor_group/thin_device device-config:redundancy=2 device-config:provisioning=thin 584d033c-7bad-ebc8-30dd-1888ea2bea29If you don't know what's your group name, you can use vgs/lvs, in my case I use thin provisioning, so I have an associated volume:
[10:21 r620-s1 ~]# vgs VG #PV #LV #SN Attr VSize VFree linstor_group 1 5 0 wz--n- 931.51g 0 [10:21 r620-s1 ~]# lvs LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert thin_device linstor_group twi-aotz-- <931.28g 0.29 10.55 ...I did it using XO interface. Now it doesn't show up and when I tried your suggestion of running xe sr-introduce, it just creates an "Unknown" SR and doesn't link it to the previous one. Running xe sr-create also doesn't help since that errors out with LINSTOR SR creation error [opterr=LINSTOR SR must be unique in a pool]
If you have this error, the LINSTOR PBDs still exist. Are you sure you forgot the previous SR?
So, with XOSTOR created and making the Pool HA with that SR, whenever I created a new VM in that SR and not choose any affinity host, it takes atleast 10-15 minutes to run a migrate task which shouldn't be necessary because XOSTOR is shared right?
Regarding the migration, it's correct if the SR is created with shared=true, and if you migrate the VM between two hosts with the same SR used, the migration should be short.
After repairing your SR, you can do a VM migration and send me the logs of the machines if you want, I can take a look. -
@AudleyElwine If you forgot your SR, you can follow the instructions I gave in the previous message. Otherwise, check if the PBDs are correctly plugged to the SR, it's probably not the case.
-
@ronan-a I did not forget the SR so yeah it is the PBDs.
I tried to plug them back withxe pbd-plug uuid=...taking the uuid from the
xe pbd-list sr-uuid=xostor-uuidI was able to plug three hosts, however the last forth host says the following.
Error code: SR_BACKEND_FAILURE_1200 Error parameters: , Cannot update volume uuid 36a23780-2025-4f3f-bade-03c410e63368 to 45537c14-0125-4f6c-a1ad-476552888087: this last one is not empty,What do you think I should do to make the forth host pbd connect to delete the SR correctly?
-
@ronan-a I just tried to reintroduce the SR and I got no errors while running xe pdb-create but it still shows up as a -1 Size SR. I think I might have corrupted the metadata as checking lvs, vgs and pvs throw errors:
[11:09 xcp-ng-node-1 ~]# lvs /dev/drbd1014: open failed: No data available LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert 712c1f83-d11f-ae07-d2b8-14a823761e6e XSLocalEXT-712c1f83-d11f-ae07-d2b8-14a823761e6e -wi-ao---- <182.06g thin_device linstor_group twi-aotz-- <238.24g 1.64 11.27 xcp-persistent-database_00000 linstor_group Vwi-aotz-- 1.00g thin_device 0.84 xcp-persistent-ha-statefile_00000 linstor_group Vwi-aotz-- 8.00m thin_device 6.25 xcp-persistent-redo-log_00000 linstor_group Vwi-aotz-- 260.00m thin_device 0.53 xcp-volume-13a94a7a-d433-4426-8232-812e3c6dc52e_00000 linstor_group Vwi-aotz-- 10.03g thin_device 0.14 xcp-volume-4b70d69b-9cca-4aa3-842f-09366ac76901_00000 linstor_group Vwi-aotz-- 10.03g thin_device 38.67 xcp-volume-70bf80a2-a008-469a-a7db-0ea92fcfc392_00000 linstor_group Vwi-aotz-- 20.00m thin_device 71.88 [11:09 xcp-ng-node-1 ~]# vgs /dev/drbd1014: open failed: No data available VG #PV #LV #SN Attr VSize VFree XSLocalEXT-712c1f83-d11f-ae07-d2b8-14a823761e6e 1 1 0 wz--n- <182.06g 0 linstor_group 1 7 0 wz--n- 238.47g 0 [11:09 xcp-ng-node-1 ~]# pvs /dev/drbd1014: open failed: No data available PV VG Fmt Attr PSize PFree /dev/sda3 XSLocalEXT-712c1f83-d11f-ae07-d2b8-14a823761e6e lvm2 a-- <182.06g 0 /dev/sdb linstor_group lvm2 a-- 238.47g 0 [11:09 xcp-ng-node-1 ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT drbd1016 147:1016 0 10G 0 disk drbd1014 147:1014 0 10G 0 disk sdb 8:16 0 238.5G 0 disk |-linstor_group-thin_device_tmeta 253:1 0 120M 0 lvm | `-linstor_group-thin_device-tpool 253:3 0 238.2G 0 lvm | |-linstor_group-xcp--persistent--redo--log_00000 253:10 0 260M 0 lvm | | `-drbd1002 147:1002 0 259.7M 0 disk | |-linstor_group-xcp--persistent--database_00000 253:8 0 1G 0 lvm | | `-drbd1000 147:1000 0 1G 0 disk /var/lib/linstor | |-linstor_group-thin_device 253:4 0 238.2G 0 lvm | |-linstor_group-xcp--volume--13a94a7a--d433--4426--8232--812e3c6dc52e_00000 253:11 0 10G 0 lvm | | `-drbd1004 147:1004 0 10G 0 disk | |-linstor_group-xcp--persistent--ha--statefile_00000 253:9 0 8M 0 lvm | | `-drbd1001 147:1001 0 8M 0 disk | |-linstor_group-xcp--volume--70bf80a2--a008--469a--a7db--0ea92fcfc392_00000 253:5 0 20M 0 lvm | | `-drbd1009 147:1009 0 20M 0 disk | `-linstor_group-xcp--volume--4b70d69b--9cca--4aa3--842f--09366ac76901_00000 253:12 0 10G 0 lvm | `-drbd1006 147:1006 0 10G 0 disk `-linstor_group-thin_device_tdata 253:2 0 238.2G 0 lvm `-linstor_group-thin_device-tpool 253:3 0 238.2G 0 lvm |-linstor_group-xcp--persistent--redo--log_00000 253:10 0 260M 0 lvm | `-drbd1002 147:1002 0 259.7M 0 disk |-linstor_group-xcp--persistent--database_00000 253:8 0 1G 0 lvm | `-drbd1000 147:1000 0 1G 0 disk /var/lib/linstor |-linstor_group-thin_device 253:4 0 238.2G 0 lvm |-linstor_group-xcp--volume--13a94a7a--d433--4426--8232--812e3c6dc52e_00000 253:11 0 10G 0 lvm | `-drbd1004 147:1004 0 10G 0 disk |-linstor_group-xcp--persistent--ha--statefile_00000 253:9 0 8M 0 lvm | `-drbd1001 147:1001 0 8M 0 disk |-linstor_group-xcp--volume--70bf80a2--a008--469a--a7db--0ea92fcfc392_00000 253:5 0 20M 0 lvm | `-drbd1009 147:1009 0 20M 0 disk `-linstor_group-xcp--volume--4b70d69b--9cca--4aa3--842f--09366ac76901_00000 253:12 0 10G 0 lvm `-drbd1006 147:1006 0 10G 0 disk drbd1012 147:1012 0 10G 0 disk tda 254:0 0 10G 0 disk drbd1015 147:1015 0 10G 0 disk drbd1005 147:1005 0 20M 0 disk sda 8:0 0 223.6G 0 disk |-sda4 8:4 0 512M 0 part /boot/efi |-sda2 8:2 0 18G 0 part |-sda5 8:5 0 4G 0 part /var/log |-sda3 8:3 0 182.1G 0 part | `-XSLocalEXT--712c1f83--d11f--ae07--d2b8--14a823761e6e-712c1f83--d11f--ae07--d2b8--14a823761e6e 253:0 0 182.1G 0 lvm /run/sr-mount/712c1f83-d11f-ae07-d2b8-14a82376 |-sda1 8:1 0 18G 0 part / `-sda6 8:6 0 1G 0 part [SWAP] tdb 254:1 0 50G 0 disk [11:09 xcp-ng-node-1 ~]#Is it possible to clean up the partition table and recreate it some other way without having to reinstall xcp-ng on the machines? As using wipefs -a says that the device is in use so I cannot wipe the partitions
-
@AudleyElwine said in XOSTOR hyperconvergence preview:
Ho! Sounds like a bug fixed in the latest beta... In this case, ensure there is no VM running, and download this script:
wget https://gist.githubusercontent.com/Wescoeur/3b5c399b15c4d700b4906f12b51e2591/raw/452acd9ebcd52c62020e796302c681590b37cd3f/gistfile1.txt -O linstor-kv-tool && chmod +x linstor-kv-toolFind where is the running linstor-controller, so execute this command on each host:
[11:13 r620-s1 ~]# mountpoint /var/lib/linstor /var/lib/linstor is a mountpointIf it's a mounpoint, you found it. Now, you must execute the script using the local IP of this host, for example:
./linstor-kv-tool --dump-volumes -u 172.16.210.16 -g xcp-sr-linstor_group_thin_deviceThe group to use is equal to:
<VG_name>_<LV_thin_name>. Or just<VG_name>if you don't use thin provisioning.
Note: there was a bug in the previous beta, you must double thexcp-sr-prefix. (Example:xcp-sr-xcp-sr-linstor_group_thin_device)So if you have an output using this script with many entries, you can run
--remove-all-volumesinstead of--dump-volumes. This command should remove the properties in the LINSTOR KV-store. After that you can dump a new time to verify.Now, you can execute a scan on the SR. After that, it's necessary to remove all resource definitions using the
linstorbinary.Get the list using:
linstor --controllers=<CONTROLLER_IP> resource-definition list āāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāā® ā ResourceName ā Port ā ResourceGroup ā State ā āāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāā” ā xcp-persistent-database ā 7000 ā xcp-sr-linstor_group_thin_device ā ok ā ā xcp-volume-0db304a1-89a2-45df-a39d-7c5c39a87c5f ā 7006 ā xcp-sr-linstor_group_thin_device ā ok ā ā xcp-volume-6289f306-ab2b-4388-a5a2-a20ba18698f8 ā 7005 ā xcp-sr-linstor_group_thin_device ā ok ā ā xcp-volume-73b9a396-c67f-48b3-8774-f60f1c2af598 ā 7001 ā xcp-sr-linstor_group_thin_device ā ok ā ā xcp-volume-a46393ef-428d-4af8-9c0e-30b0108bd21a ā 7003 ā xcp-sr-linstor_group_thin_device ā ok ā ā xcp-volume-b83db8cf-ea3b-47aa-ad77-89b5cd9a1853 ā 7002 ā xcp-sr-linstor_group_thin_device ā ok ā ā°āāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāāÆThen execute
linstor resource-definition delete <VOLUME>on each volume. But don't do that on thexcp-persistent-database, only onxcp-volume-XXX!Normally after all these steps, you can destroy the SR properly! I think I will write an automated version for later, like
linstor-emergency-destroy. -
@TheiLLeniumStudios Can you plug the PBDs? If there is no issue here, you can follow the same steps as AudleyElwine.
-
@ronan-a Thank you for the detailed steps.
I get the following output when i dump my volumes using the
xcp-sr-linstor_group_thin_devicegroup{ "xcp/sr/journal/clone/0fb10e9f-b9ef-4b59-8b31-9330f0785514": "86b1b2af-8f1d-4155-9961-d06bbacbb7aa_0e121812-fcae-4d70-960f-ac440b3927e3", "xcp/sr/journal/clone/14131ee4-2956-47b7-8728-c9790764f71a": "dfb43813-91eb-46b8-9d56-22c8dbb485fc_917177d5-d03b-495c-b2db-fd62d3d25b86", "xcp/sr/journal/clone/45537c14-0125-4f6c-a1ad-476552888087": "36a23780-2025-4f3f-bade-03c410e63368_3e419764-9c8c-4539-9a42-be96f92e5c2a", "xcp/sr/journal/clone/54ec7009-2424-4299-a9ad-fb015600b88c": "af89f0fc-7d5a-4236-b249-8d9408f5fb6d_f32f2e8f-a43f-43f5-824b-f673a5cbd988", "xcp/sr/journal/clone/558220bc-a900-4408-a62e-a71a4bb4fd7b": "d9294359-c395-4bed-ac3a-bf4027c92bd9_0e18bf3d-78f0-4843-9e8f-ee11c6ebbf5a", "xcp/sr/journal/clone/c41e0d47-5c1a-45c3-9404-01f3b5735c0d": "e191eb57-2478-4e3b-be9d-e8eaba8f9efe_41eae673-a280-439b-a4c6-f3afe2390fde", "xcp/sr/journal/relink/50170fa2-2ca9-4218-8217-5c99ac31f10b": "1" }but the
--remove-all-volumesdoes not delete them because they dont start withxcp/volume/.Also when i placed
xcp-sr-xcp-sr-linstor_group_thin_devicea lot of volumes appeared similar to the following{ "volume/00897d74-53c9-41b4-8f5f-73132e4a9af7/metadata": "{\"read_only\": true, \"snapshot_time\": \"\", \"vdi_type\": \"vhd\", \"snapshot_of\": null, \"name_label\": \"base copy\", \"name_description\": \"\", \"type\": \"user\", \"metadata_of_pool\": \"\", \"is_a_snapshot\": false}", "volume/00897d74-53c9-41b4-8f5f-73132e4a9af7/not-exists": "0", "volume/00897d74-53c9-41b4-8f5f-73132e4a9af7/volume-name": "xcp-volume-2892500d-d80a-4978-aa87-ab2b39ace9e9", "volume/00b0dbb5-2dfa-4fd5-baf4-81065afa2431/metadata": "{\"read_only\": true, \"snapshot_time\": \"\", \"vdi_type\": \"vhd\", \"snapshot_of\": null, \"name_label\": \"base copy\", \"name_description\": \"\", \"type\": \"user\", \"metadata_of_pool\": \"\", \"is_a_snapshot\": false}", "volume/00b0dbb5-2dfa-4fd5-baf4-81065afa2431/not-exists": "0", ... ... ... "volume/fcbcd0dc-8d90-441e-8d03-e435ac417b96/not-exists": "0", "volume/fcbcd0dc-8d90-441e-8d03-e435ac417b96/volume-name": "xcp-volume-f3748b88-1b25-4f18-8f63-4017b09f2ac6", "volume/fce3b2e0-1025-4c94-9473-e71562ca11bd/metadata": "{\"read_only\": true, \"snapshot_time\": \"\", \"vdi_type\": \"vhd\", \"snapshot_of\": null, \"name_label\": \"base copy\", \"name_description\": \"\", \"type\": \"user\", \"metadata_of_pool\": \"\", \"is_a_snapshot\": false}", "volume/fce3b2e0-1025-4c94-9473-e71562ca11bd/not-exists": "0", "volume/fce3b2e0-1025-4c94-9473-e71562ca11bd/volume-name": "xcp-volume-08f1fb0b-d6a3-47eb-893b-6c8b08417726", "volume/fe6bc8fd-4211-4b4a-8ee5-ba55a7641053/metadata": "{\"read_only\": true, \"snapshot_time\": \"\", \"vdi_type\": \"vhd\", \"snapshot_of\": null, \"name_label\": \"base copy\", \"name_description\": \"\", \"type\": \"user\", \"metadata_of_pool\": \"\", \"is_a_snapshot\": false}", "volume/fe6bc8fd-4211-4b4a-8ee5-ba55a7641053/not-exists": "0", "volume/fe6bc8fd-4211-4b4a-8ee5-ba55a7641053/volume-name": "xcp-volume-7a46e0f4-0f61-4a37-b235-1d2bd9eaf033", "volume/fe8dc6e6-a2c6-449a-8858-255a37cc8f98/metadata": "{\"read_only\": true, \"snapshot_time\": \"\", \"vdi_type\": \"vhd\", \"snapshot_of\": \"\", \"name_label\": \"base copy\", \"name_description\": \"\", \"type\": \"user\", \"metadata_of_pool\": \"\", \"is_a_snapshot\": false}", "volume/fe8dc6e6-a2c6-449a-8858-255a37cc8f98/not-exists": "0", "volume/fe8dc6e6-a2c6-449a-8858-255a37cc8f98/volume-name": "xcp-volume-0290c420-9f14-43ae-9af5-fe333b60c7dc", "volume/feadfc8d-5aeb-429c-8335-4530aa24cc86/metadata": "{\"read_only\": true, \"snapshot_time\": \"\", \"vdi_type\": \"vhd\", \"snapshot_of\": null, \"name_label\": \"base copy\", \"name_description\": \"\", \"type\": \"user\", \"metadata_of_pool\": \"\", \"is_a_snapshot\": false}", "volume/feadfc8d-5aeb-429c-8335-4530aa24cc86/not-exists": "0", "volume/feadfc8d-5aeb-429c-8335-4530aa24cc86/volume-name": "xcp-volume-6a37cf38-d6e4-4af3-90d7-84bec3938b20", "xcp/sr/metadata": "{\"name_description\": \"\", \"name_label\": \"XOSTOR\"}" }and the
--remove-all-volumesalso does not work on them.
I did the following with and without thexcp-srprefix and it produced an empty json when specifiying the namesapce as/xcp/volumeto match thestartwithin the delete thingy../linstor-kv-tool --dump-volumes -u 192.168.0.106 -g xcp-sr-linstor_group_thin_device -n /xcp/volumeWhat do you think I should do?
-
@AudleyElwine said in XOSTOR hyperconvergence preview:
but the --remove-all-volumes does not delete them because they dont start with xcp/volume/.
Right, another problem already fixed, but I forgot to put an adapted version on my gist, sorry, you can modify the script to use
volume/instead ofxcp/volume. -
@ronan-a Thank you for your fast support.
I did these changes
diff -u linstor-kv-tool linstor-kv-tool-modified --- linstor-kv-tool 2022-11-17 18:57:00.941259380 +0800 +++ linstor-kv-tool-modified 2022-11-17 19:04:15.957504667 +0800 @@ -33,7 +33,7 @@ kv = linstor.KV( group_name, uri=controller_uri, - namespace='/xcp/volume/{}'.format(vdi_name) + namespace='/volume/{}'.format(vdi_name) ) for key, value in list(kv.items()): @@ -46,11 +46,11 @@ uri=controller_uri, namespace='/' ) - for key, value in list(kv.items()): - if key.startswith('xcp/volume/'): + if key.startswith('volume/'): size = key.rindex('/') kv.namespace = key[:size] + print("key is {}".format(repr(key[size + 1:]))) del kv[key[size + 1:]]and I got the following error.
./linstor-kv-tool-modified --remove-all-volumes -u 192.168.0.106 -g xcp-sr-xcp-sr-linstor_group_thin_device key is u'metadata' Traceback (most recent call last): File "./linstor-kv-tool-modified", line 78, in <module> main() File "./linstor-kv-tool-modified", line 74, in main remove_all_volumes(args.uri, args.group_name) File "./linstor-kv-tool-modified", line 54, in remove_all_volumes del kv[key[size + 1:]] File "/usr/lib/python2.7/site-packages/linstor/kv.py", line 151, in __delitem__ self._del_linstor_kv(k) File "/usr/lib/python2.7/site-packages/linstor/kv.py", line 89, in _del_linstor_kv raise linstor.LinstorError('Could not delete kv({}): {}'.format(k, rs[0])) linstor.errors.LinstorError: Error: Could not delete kv(/volume/aec2104e-e501-4d7d-b0fb-95a80e843e0a/metadata): ERRO:Exception thrown.and I can confirm the volume exist when I dump all of them
"volume/aec2104e-e501-4d7d-b0fb-95a80e843e0a/metadata": "{\"read_only\": true, \"snapshot_time\": \"\", \"vdi_type\": \"vhd\", \"snapshot_of\": \"\", \"name_label\": \"base copy\", \"name_description\": \"\", \"type\": \"user\", \"metadata_of_pool\": \"\", \"is_a_snapshot\": false}", "volume/aec2104e-e501-4d7d-b0fb-95a80e843e0a/not-exists": "0", "volume/aec2104e-e501-4d7d-b0fb-95a80e843e0a/volume-name": "xcp-volume-b1748285-7cda-429f-b230-50dfba161e9c",May I ask what do you recommend me to do? And thank you for your continues support.
