Alert: Control Domain Memory Usage

delaf

@stormi For the kernel-4.19.19-6.0.10.1.xcpng8.1 test, i'm not sure it solve the problem because I get a small memory increase. We have to wait a bit more

delaf

@stormi

server 266 with alt-kernel: still no problem.
server 268 with 4.19.19-6.0.10.1.xcpng8.1: the problem has begun some days ago after some stable days.
server 272 with 4.19.19-6.0.11.1.0.1.patch53disabled.xcpng8.1:
)
server 273 with 4.19.19-6.0.11.1.0.1.patch62disabled.xcpng8.1:

It seems that 4.19.19-6.0.11.1.0.1.patch62disabled.xcpng8.1 is more stable than 4.19.19-6.0.11.1.0.1.patch53disabled.xcpng8.1. But it is a but early to be sure.

delaf

@stormi @r1 server 273 with 4.19.19-6.0.11.1.0.1.patch62disabled.xcpng8.1 is still stable and 272 has the memory problem.

272
273

stormi

Thanks. It looks like I'm doomed to see seemingly contradictory results for every kernel-related issue (this one, and an other one regarding network performance): you don't have any leaks without patch 62, but you had leaks with kernel 4.19.19-6.0.10.1.xcpng8.1 which doesn't have that patch either. So it's hard to conclude anything

rblvlvl

Hey Guys,

we are facing the same issue with xcp 8.1.
We can't figure out what uses all this memory (8GB) or how to reduce it. Restarting the Toolstack did nothing and we can't afford a downtime because everything runs in production. Similar systems with same configurations don't show such a behavior.

I can provide you with some output from our system, maybe you can see something or help us finding a solution.

free -m

              total        used        free      shared  buff/cache   available
Mem:           7912        7595          82          33         234          62
Swap:          1023         216         807

xl top

      NAME  STATE   CPU(sec) CPU(%)     MEM(k) MEM(%)  MAXMEM(k) MAXMEM(%) VCPUS NETS NETTX(k) NETRX(k) VBDS   VBD_OO    VBD_RD     VBD_WR   VBD_RSECT   VBD_WSECT SSID
  Domain-0 -----r    7308446   52.1    8388608    3.1    8388608       3.1    16    0        0        0    0        0         0          0           0           0    0

xe vm-param-list uuid | grep memory

                         memory-actual ( RO): 8589934592
                         memory-target ( RO): <unknown>
                       memory-overhead ( RO): 84934656
                     memory-static-max ( RW): 8589934592
                    memory-dynamic-max ( RW): 8589934592
                    memory-dynamic-min ( RW): 8589934592
                     memory-static-min ( RW): 8589934592
                                memory (MRO): <not in database>

lsmod and grub.cfg
lsmod.txt
grub-cgf.txt

top output
Bildschirmfoto 2020-12-30 um 08.55.32.png

Tell me if you need more information or if you have any idea. Thanks.

olivierlambert

We need more details on the host.

Hardware detail (NICs, server model)
If all your hardware is fully BIOS/firmware up to date
The kind of storage used (iSCSI, FCoE, NFS?)

So far, we couldn't find a real common thing between people, and that's make hard to find the root cause.

rblvlvl

@olivierlambert

It is a Dell PowerEdge R440 Version 2.6.3 with an LACP Bond and we use an NFS Storage.

olivierlambert

That doesn't answer all my questions

rblvlvl

@olivierlambert

NIC:
Intel(R) Ethernet 10G 2P X550-t Adapter

driver: ixgbe
version: 5.5.2
firmware-version: 0x80000f32, 19.5.12

RAID Controller:

Product Name    : PERC H740P Adapter 
Serial No       : 04B00V9
FW Package Build: 50.9.4-3025

                    Mfg. Data
                ================
Mfg. Date       : 04/18/20
Rework Date     : 04/18/20
Revision No     : A03
Battery FRU     : N/A

                Image Versions in Flash:
                ================
Boot Block Version : 7.02.00.00-0021
BIOS Version       : 7.09.02.1_0x07090301
FW Version         : 5.093.00-2856
NVDATA Version     : 5.0900.06-0034

I know our hardware is not fully up to date, but for an update we need a timeframe, which can not be arranged that quickly.
Maybe someone knows a temporary fix to reduce the usage of the dom0 memory until the updates can be made.

olivierlambert

Thanks.

If it's a kernel leak, there's nothing to do in user space.

stormi

Hi everyone.

So, let's not give up, and let's try to find that hidden kernel leak and fix it!

Let me summarize what we currently know. Correctly me if one of the statements is wrong for you:

It all started with XCP-ng 8.0 and still happens in XCP-ng 8.1
Memory is not used by user space processes. It's a kernel leak
We have fixed a rsyslog memory leak through updates, but it was a different issue. By the way, if you have memory that is eaten by a user space process, please open a new thread so that we stay focused on the kernel leak here.
Our alternate kernel, kernel-alt, is apparently not affected.
Most (all?) affected hosts have 10Gb interfaces
Many affected hosts are using iSCSI, though the last report (from @rblvlvl) is on a host with NFS storage
Some reports suggest that the more network intensive the load is, the quicker the memory usage grows.
Hosts with more VMs seem to see memory usage grow faster (may be related to the previous points)
At some point we thought that reverting to a previous kernel (without some security patches) had solved the issue, but after some time memory usage started to grow again
kmemleak did not detect obvious culprits, though @r1 has a lead regarding iscsi-related functions and we should still keep trying
Disabling the specific device drivers in favour of the built-in drivers in the kernel did not stop the leak

Things that we don't know (tests welcome):

Is it affecting XCP-ng 8.2 too?
Is it affecting Citrix Hypervisor? It should since we use the same kernel and drivers (mostly), but this doesn't seem to be a known issue to them.

Now, how to move on:

Getting our hands on an affected test server and being authorized to reboot it, change the kernel, etc., would help a lot, since we can't reproduce internally (@dave maybe? At some point you said you might provide one)
Reach out to kernel developers for advice?
If someone manages to reproduce on Citrix Hypervisor, raise the issue on their bugtracker too.
Check the kernel 4.19 history for memory leak fixes, especially those related to networking.

Any other idea to move on is welcome, of course.

stormi

Before I realized that not every affected host was using the ixgbe driver, contrarily to what I initially thought, I built an alternate driver from the latest sources from Intel.

So, even if there's little hope that it will fix anything, here's how to install it (on XCP-ng 8.1 or 8.2):

yum install intel-ixgbe-alt --enablerepo=xcp-ng-testing
reboot

olivierlambert

Do we asked to provide also lsmod? That might be interesting to overlap different results and see common ones.

stormi

@olivierlambert Yes, various users have shared their lsmod.

olivierlambert

The latest report was on a NFS storage, however lsmod displays various iSCSI modules loaded. So it doesn't mean it's not an iSCSI module issue:

scsi_mod              253952  13 fcoe,scsi_dh_emc,sd_mod,dm_multipath,scsi_dh_alua,scsi_transport_fc,libfc,bnx2fc,megaraid_sas,sg,scsi_dh_rdac,scsi_dh_hp_sw

edit: what about bnx2fc? Is it common to other reports?

edit 2: nope, might be megaraid_sas instead.

olivierlambert

Is there a way to provide alternate/up to date modules for the most suspicious ones? At some point, we'll find the culprit!

stormi

It depends how self-contained the modules are. For device drivers, it's usually feasible. For more core parts of the kernel, I think we should rather try to identify patches that look like they could fix the issue and rebuild the kernel with them.

We could also opt for a dichotomy approach between the main kernel and the alternate kernel, but since it takes days before one can be sure that there's no leak, it's not really doable, unless we find a way to reproduce the issue way faster (which is another thing in which users may help: try to provoke the memleak on purpose. High network load seems to be a lead.).

stormi

@olivierlambert said in Alert: Control Domain Memory Usage:

The latest report was on a NFS storage, however lsmod displays various iSCSI modules loaded. So it doesn't mean it's not an iSCSI module issue:

Isn't it SCSI rather than iSCSI here? However, maybe the leak is in SCSI layers indeed...

fasterfourier

I am seeing similar behavior with Citrix Hypervisor 8.2LTSR after upgrading from 7.1CU2, which was not affected. We have a pool with 5 Poweredge R730 hosts and 2 R720 hosts. All have Intel 10G and 1G NICs (ixgbe and igb drivers) and we use iSCSI storage. I have had two hosts use up all their control domain memory, requiring an evacuate/reboot of the host. One host was the pool master, which runs only one VM (xen orchestra appliance) but is generally busy with various iSCSI tasks due to snapshot coalesce after daily backups. The other host has ~20 VMs that are pretty busy with network activity. No userspace processes that seem to be using an abnormal amount of memory.

stormi

Thanks, this is good to have confirmation of what we thought about CH 8.2 but couldn't prove!