I assume the EqualLogic can only handle certain harddrives?
Prior it was the DELL 600GB SAS HDD
I then replaced with DELL 1.92TB SAS SSD drives
Both labeled Enterprise Class certified by DELL.
I have reset and replaced the drives as if this was a first time setup.
Then create the raid setup and then volumes,,
But not liking the drives
Is there something I am missing?
Thanks for any help....
When running the reset command.
Reset this array to factory defaults? [n/DeleteAllMyDataNow] DeleteAllMyDataNow
Setting cache to write through
Resetting system, this will take a few minutes.
288174:224094:SP:15-May-2024 11:22:38.502910:cache_driver.cc:1056:WARNING::28.3.17:Active control module cache is now in write-through mode. Array performance is degraded.
Deleting backup password files
Deleting agent.cnf
Cleaning-up /pss/dumps/
Cleaning-up /pss/update/
Shutting down virtualization
Successfully stopped process
Successfully stopped process
*** ERROR *** No disks found
Zeroing drives, nvram and rebooting the system
Enclosure/Drive 0/0 found in failed state will attempt to bring online for zero operation.
Enclosure/Drive 0/1 found in failed state will attempt to bring online for zero operation.
Enclosure/Drive 0/2 found in failed state will attempt to bring online for zero operation.
Enclosure/Drive 0/3 found in failed state will attempt to bring online for zero operation.
Enclosure/Drive 0/4 found in failed state will attempt to bring online for zero operation.
Enclosure/Drive 0/5 found in failed state will attempt to bring online for zero operation.
Enclosure/Drive 0/6 found in failed state will attempt to bring online for zero operation.
Enclosure/Drive 0/7 found in failed state will attempt to bring online for zero operation.
Enclosure/Drive 0/8 found in failed state will attempt to bring online for zero operation.
Enclosure/Drive 0/9 found in failed state will attempt to bring online for zero operation.
Enclosure/Drive 0/10 found in failed state will attempt to bring online for zero operation.
Enclosure/Drive 0/11 found in failed state will attempt to bring online for zero operation.
[PWRDN]
[ENTRY][BIST][1][EQL][WDOG][TWDOG][WFP][210][C2F][MESR][MINIT][MATS][SCRUB][BOOT2][PROC][BOARD][SMP][IOBUS][FLASH][USB]
#########################################################
Dell Inc. Storage Array
Copyright 2001-2017 Dell Inc.
SP:2.50:mips_pss_init.c:363:INFO:28.2.107:Control module in slot 0 with serial number CN-007JN6-13740-2CI-00B2 is designated as active.
SP:1715786712.26:emm.c:1333:INFO:28.2.6:Enclosure serial number: CN-01N9TR-70821-3BT-0LUP-A01.
SP:1715786713.56:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/0 is not approved because it uses logical block size emulation.
SP:1715786713.56:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 0 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K601751).
SP:1715786713.56:emm.c:2363:WARNING:28.3.51:Warning health conditions currently exist.
Correct these conditions before they affect array operation.
An unauthorized drive has been detected and disabled.
There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
SP:1715786713.56:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/1 is not approved because it uses logical block size emulation.
SP:1715786713.56:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 1 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503725).
SP:1715786713.57:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/2 is not approved because it uses logical block size emulation.
SP:1715786713.57:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 2 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503937).
SP:1715786713.57:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/3 is not approved because it uses logical block size emulation.
SP:1715786713.57:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 3 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503947).
SP:1715786713.57:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/4 is not approved because it uses logical block size emulation.
SP:1715786713.57:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 4 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503200).
SP:1715786713.58:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/5 is not approved because it uses logical block size emulation.
SP:1715786713.58:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 5 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503676).
SP:1715786713.58:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/6 is not approved because it uses logical block size emulation.
SP:1715786713.58:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 6 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K502875).
SP:1715786713.58:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/7 is not approved because it uses logical block size emulation.
SP:1715786713.58:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 7 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K601554).
SP:1715786713.58:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/8 is not approved because it uses logical block size emulation.
SP:1715786713.58:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 8 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503193).
SP:1715786713.58:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/9 is not approved because it uses logical block size emulation.
SP:1715786713.58:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 9 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503124).
SP:1715786713.59:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/10 is not approved because it uses logMFS set up
Building databases...
ical block size emulation.
SP:1715786713.59:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 10 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K601893).
SP:1715786713.59:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/11 is not approved because it uses logical block size emulation.
SP:1715786713.59:pclass.c:10210:WARNING:32.3.28:The drive at enclosure 0, drive 11 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K601562).
SP:1715786714.19:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/0 is not approved because it uses logical block size emulation.
SP:1715786714.19:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 0 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K601751).
SP:1715786714.70:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/1 is not approved because it uses logical block size emulation.
SP:1715786714.70:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 1 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503725).
SP:1715786715.21:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/2 is not approved because it uses logical block size emulation.
SP:1715786715.21:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 2 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503937).
SP:1715786715.72:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/3 is not approved because it uses logical block size emulation.
SP:1715786715.72:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 3 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503947).
SP:1715786716.23:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/4 is not approved because it uses logical block size emulation.
SP:1715786716.23:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 4 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503200).
SP:1715786716.74:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/5 is not approved because it uses logical block size emulation.
SP:1715786716.74:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 5 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503676).
SP:1715786717.24:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/6 is not approved because it uses logical block size emulation.
SP:1715786717.25:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 6 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K502875).
SP:1715786717.75:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/7 is not approved because it uses logical block size emulation.
SP:1715786717.76:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 7 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K601554).
SP:1715786718.26:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/8 is not approved because it uses logical block size emulation.
SP:1715786718.27:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 8 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503193).
SP:1715786718.78:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/9 is not approved because it uses logical block size emulation.
SP:1715786718.78:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 9 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K503124).
SP:1715786719.29:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/10 is not approved because it uses logical block size emulation.
SP:1715786719.29:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 10 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K601893).
SP:1715786719.80:misc.c:198:WARNING:32.3.39:Enclosure/Drive 0/11 is not approved because it uses logical block size emulation.
SP:1715786719.80:pclass.c:12555:WARNING:32.3.28:The drive at enclosure 0, drive 11 is not supported on this array. Contact your array support provider and provide the model number (MZILS1T9HEJH0D3 ) and serial number ( S3BENX0K601562).
SP:1715786727.07:cache_driver.cc:1058:INFO:28.2.39:Active control module cache set to write-back mode.
Wed May 15 11:25:47 EDT 2024
May 15 11:25:47 init: kernel security level changed from 0 to 1
PS Series Storage Arrays
Unauthorized Access Prohibited