Looks to have done the trick, no more 100's of tasks!
I also had an issue with backups whereby they were trying to access the XCP-NG host via their storage adaptors to which the appliance had to access to.
Your fix seems to have resolved that as well as I was able to rerun the backup after your fix was applied without issue.
Looks to have done the trick, no more 100's of tasks!
I also had an issue with backups whereby they were trying to access the XCP-NG host via their storage adaptors to which the appliance had to access to.
Your fix seems to have resolved that as well as I was able to rerun the backup after your fix was applied without issue.
Oops my apologies on my terminology!
I shall make a mental note of that one.
I've also had an issue crop up with regards to my backups, would that be better in another thread?
Again has happened after me patching everything.
Thanks again.
You can ignore this as the fix that @julien-f has implemented looks to have fixed this also.
I've been using the following to build/update XOA:
https://github.com/Jarli01/xenorchestra_updater
The current switch I used is "lts" and this gives me xo-server 5.82.1 & xo-web 5.87.0 from the "About" within XOA.
Not sure if that answers your question but I hope so.
Hi All,
Been using XOA community edition and XCP-NG for a while now and all has been plain sailing.
Yesterday I patched all three XCP-NG hosts up to date starting with the master of course, once this was done I updated XOA as well.
I now see lots of these tasks for the host that is running as the master, if I change the master the tasks follow to the new master etc.
I did see the following post:
https://xcp-ng.org/forum/topic/4926/thousands-of-tasks-xapi-getresource-rrd_updates-on-xcp-ng-01-0
I don't think this applies to me as all three XCP-NG hosts have their management interface in the same network as XOA.
If I restart the toolstack on the XCP-NG host acting as the master these tasks go away.
Thanks all,
Nick