Tips on installing XO

jasonnix

@Danp
Please take a look at this.

DustinB

@jasonnix said in Tips on installing XO:

@Danp
Please take a look at this.

On your Debian install, why not just connect to the system over SSH and run

sudo bash
and

bash -c "$(curl https://raw.githubusercontent.com/Jarli01/xenorchestra_installer/master/xo_install.sh)"

Danp

@jasonnix said in Tips on installing XO:

Please take a look at this.

I've seen it, and just checked again. I see no mention of husky at all. Only yarn and yarn build.

Am I missing something?

jasonnix

@Danp
When I ran yarn, then I saw that error about husky. BTW, I ignored that and did:

$ sudo yarn build
yarn run v1.22.21
$ TURBO_TELEMETRY_DISABLED=1 turbo run build --scope xo-server --scope xo-server-'*' --scope xo-web
• Packages in scope: xo-server, xo-server-audit, xo-server-auth-github, xo-server-auth-google, xo-server-auth-ldap, xo-server-auth-oidc, xo-server-auth-saml, xo-server-backup-reports, xo-server-load-balancer, xo-server-netbox, xo-server-perf-alert, xo-server-sdn-controller, xo-server-test, xo-server-test-plugin, xo-server-transport-email, xo-server-transport-icinga2, xo-server-transport-nagios, xo-server-transport-slack, xo-server-transport-xmpp, xo-server-usage-report, xo-server-web-hooks, xo-web
• Running build in 22 packages
• Remote caching disabled

 Tasks:    25 successful, 25 total
Cached:    0 cached, 25 total
  Time:    6m32.251s 

Done in 393.78s.

Is this OK?

Danp

@jasonnix Yes, that looks normal to me.

jasonnix

Hello @Danp,
I installed the XO, but when I use sudo service orchestra start command, then I can't see the web interface and I must use yarn start. Why?
The service is running:

$ sudo service orchestra status
● orchestra.service - LSB: forever-service startup script for orchestra
     Loaded: loaded (/etc/init.d/orchestra; generated)
     Active: active (exited) since Sat 2024-03-09 05:02:50 EST; 5s ago
       Docs: man:systemd-sysv-generator(8)
    Process: 31543 ExecStart=/etc/init.d/orchestra start (code=exited, status=0/SUCCESS)
        CPU: 24ms

Mar 09 05:02:47 XO systemd[1]: Starting orchestra.service - LSB: forever-service startup script for orchestra...
Mar 09 05:02:48 XO orchestra[31543]: Starting orchestra
Mar 09 05:02:50 XO systemd[1]: Started orchestra.service - LSB: forever-service startup script for orchestra.

No systemd?

Danp

It could be a rights issue. What user name did you use when you performed the forever-service install?

jasonnix

@Danp, I did the following command:

jason@XO:$ sudo forever-service install orchestra -r jason -s dist/cli.mjs

Danp

IDK. The fact that it shows "active (exited)" is problematic because I would have expected to see "active (running)".

Have you checked the logs for further information?

jasonnix

@Danp,
Log says:

$ sudo cat /var/log/orchestra.log 
2024-03-09T12:17:14.254Z xo:main INFO Configuration loaded.
2024-03-09T12:17:14.330Z xo:main WARN Web server could not listen on http://localhost:80 {
  error: Error: listen EACCES: permission denied 0.0.0.0:80
      at Server.setupListenHandle [as _listen2] (node:net:1794:21)
      at listenInCluster (node:net:1859:12)
      at Server.listen (node:net:1947:7)
      at Server.listen (/usr/local/src/xen-orchestra-master/node_modules/http-server-plus/index.js:171:12)
      at makeWebServerListen (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:500:37)
      at Array.<anonymous> (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:524:5)
      at Function.from (<anonymous>)
      at asyncMap (/usr/local/src/xen-orchestra-master/@xen-orchestra/async-map/index.js:23:28)
      at createWebServer (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:523:9)
      at main (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:792:27) {
    code: 'EACCES',
    errno: -13,
    syscall: 'listen',
    address: '0.0.0.0',
    port: 80,
    niceAddress: 'http://localhost:80'
  }
}
2024-03-09T12:17:14.337Z xo:main WARN   Access denied.
2024-03-09T12:17:14.337Z xo:main WARN   Ports < 1024 are often reserved to privileges users.
✖ EACCES: permission denied, open '/home/xo/.config/xo-server/config.z-auto.json'
Error: EACCES: permission denied, open '/home/xo/.config/xo-server/config.z-auto.json'
{"level":"error","message":"Forever detected script exited with code: 1"}
{"level":"error","message":"Script restart attempt #1501"}
2024-03-09T12:17:19.970Z xo:main INFO Configuration loaded.
2024-03-09T12:17:20.075Z xo:main WARN Web server could not listen on http://localhost:80 {
  error: Error: listen EACCES: permission denied 0.0.0.0:80
      at Server.setupListenHandle [as _listen2] (node:net:1794:21)
      at listenInCluster (node:net:1859:12)
      at Server.listen (node:net:1947:7)
      at Server.listen (/usr/local/src/xen-orchestra-master/node_modules/http-server-plus/index.js:171:12)
      at makeWebServerListen (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:500:37)
      at Array.<anonymous> (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:524:5)
      at Function.from (<anonymous>)
      at asyncMap (/usr/local/src/xen-orchestra-master/@xen-orchestra/async-map/index.js:23:28)
      at createWebServer (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:523:9)
      at main (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:792:27) {
    code: 'EACCES',
    errno: -13,
    syscall: 'listen',
    address: '0.0.0.0',
    port: 80,
    niceAddress: 'http://localhost:80'
  }
}
2024-03-09T12:17:20.080Z xo:main WARN   Access denied.
2024-03-09T12:17:20.081Z xo:main WARN   Ports < 1024 are often reserved to privileges users.
✖ EACCES: permission denied, open '/home/xo/.config/xo-server/config.z-auto.json'
Error: EACCES: permission denied, open '/home/xo/.config/xo-server/config.z-auto.json'
{"level":"error","message":"Forever detected script exited with code: 1"}
{"level":"error","message":"Script restart attempt #1502"}
(node:49836) Warning: Accessing non-existent property 'padLevels' of module exports inside circular dependency
(Use `node --trace-warnings ...` to show where the warning was created)
2024-03-09T12:17:25.841Z xo:main INFO Configuration loaded.
2024-03-09T12:17:25.932Z xo:main WARN Web server could not listen on http://localhost:80 {
  error: Error: listen EACCES: permission denied 0.0.0.0:80
      at Server.setupListenHandle [as _listen2] (node:net:1794:21)
      at listenInCluster (node:net:1859:12)
      at Server.listen (node:net:1947:7)
      at Server.listen (/usr/local/src/xen-orchestra-master/node_modules/http-server-plus/index.js:171:12)
      at makeWebServerListen (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:500:37)
      at Array.<anonymous> (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:524:5)
      at Function.from (<anonymous>)
      at asyncMap (/usr/local/src/xen-orchestra-master/@xen-orchestra/async-map/index.js:23:28)
      at createWebServer (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:523:9)
      at main (file:///usr/local/src/xen-orchestra-master/packages/xo-server/src/index.mjs:792:27) {
    code: 'EACCES',
    errno: -13,
    syscall: 'listen',
    address: '0.0.0.0',
    port: 80,
    niceAddress: 'http://localhost:80'
  }
}
2024-03-09T12:17:25.938Z xo:main WARN   Access denied.
2024-03-09T12:17:25.938Z xo:main WARN   Ports < 1024 are often reserved to privileges users.
✖ EACCES: permission denied, open '/home/xo/.config/xo-server/config.z-auto.json'
Error: EACCES: permission denied, open '/home/xo/.config/xo-server/config.z-auto.json'
{"level":"error","message":"Forever detected script exited with code: 1"}
{"level":"error","message":"Script restart attempt #1503"}

Also:

$ sudo cat /home/xo/.config/xo-server/config.z-auto.json
cat: /home/xo/.config/xo-server/config.z-auto.json: No such file or directory

Danp

Again... seems like a rights issue. What changes did you make to the config.toml file? Also, did you see this statement in the documentation?

In this config file, you can change default ports (80 and 443) for xo-server. If you are running the server as a non-root user, you will need to set the port to 1024 or higher.

jasonnix

@Danp, I just did the following:

$ cd packages/xo-server
$ mkdir -p ~/.config/xo-server
$ cp sample.config.toml ~/.config/xo-server/config.toml

Danp

@jasonnix said in Tips on installing XO:

cat: /home/xo/.config/xo-server/config.z-auto.json: No such file or directory

It is trying to create the file, but can't due to the rights issue. You may want to start over and try installing as root to avoid these problems.

jasonnix

Hi @Danp,
I used sudo. The file is located at /root/.config/xo-server/config.z-auto.json.

Danp

@jasonnix There are settings that need to be configured to run correctly under sudo. Did you make that?

jasonnix

@Danp, Not really. Which settings?

Danp

@jasonnix It is in the documentation at the very bottom.

jasonnix

Hi @Danp,
Do you mean this?
I did:

# rm -rf node_modules
# yarn
# yarn build

Then:

# nano config.toml

useSudo = true

After it:

# nano /etc/sudoers

xo ALL=(root)NOPASSWD: /bin/mount, /bin/umount, /bin/findmnt

Then, I tried to install XO as a system service:

# yarn global add forever
yarn global v1.22.21
[1/4] Resolving packages...
[2/4] Fetching packages...
[3/4] Linking dependencies...
[4/4] Building fresh packages...
success Installed "forever@4.0.3" with binaries:
      - forever
Done in 6.52s.
#
# forever start dist/cli.mjs
warn:    --minUptime not set. Defaulting to: 1000ms
warn:    --spinSleepTime not set. Your script will exit if it does not stay up for at least 1000ms
info:    Forever processing file: dist/cli.mjs
(node:742838) Warning: Accessing non-existent property 'padLevels' of module exports inside circular dependency
(Use `node --trace-warnings ...` to show where the warning was created)
(node:742838) Warning: Accessing non-existent property 'padLevels' of module exports inside circular dependency
(node:742838) Warning: Accessing non-existent property 'padLevels' of module exports inside circular dependency
root@XO:/usr/local/src/xen-orchestra-master/packages/xo-server# yarn global add forever
yarn global v1.22.21
[1/4] Resolving packages...
[2/4] Fetching packages...
[3/4] Linking dependencies...
[4/4] Building fresh packages...
success Installed "forever@4.0.3" with binaries:
      - forever
Done in 5.91s.
#
# forever-service install orchestra -r xo -s dist/cli.mjs
forever-service version 0.5.11

Platform - Debian GNU/Linux 12 (bookworm)
Could not provision service
Service is already present

Finally:

# /sbin/service orchestra status
● orchestra.service - LSB: forever-service startup script for orchestra
     Loaded: loaded (/etc/init.d/orchestra; generated)
     Active: active (exited) since Mon 2024-03-11 05:42:09 EDT; 6min ago
       Docs: man:systemd-sysv-generator(8)
    Process: 743635 ExecStart=/etc/init.d/orchestra start (code=exited, status=0/SUCCESS)
        CPU: 19ms

Mar 11 05:42:05 XO systemd[1]: Starting orchestra.service - LSB: forever-service startup script for orchestra...
Mar 11 05:42:07 XO orchestra[743635]: Starting orchestra
Mar 11 05:42:09 XO systemd[1]: Started orchestra.service - LSB: forever-service startup script for orchestra.

jasonnix

Hello,
Any idea to solve this? I have to manually start XO with the forever start dist/cli.mjs command and when I reboot the server, the service doesn't start automatically!

john.c

@jasonnix said in Tips on installing XO:

Hello,
Any idea to solve this? I have to manually start XO with the forever start dist/cli.mjs command and when I reboot the server, the service doesn't start automatically!

Did you enable that service to start at boot with systemctl enable orchestra.service?

This will make the Xen Orchestra service start automatically on each and every boot.