CEPH FS Storage Driver

maxcuttins

Ok,

i start my adventure but I get soon an issue.

This command install the nautilus release Repo:

yum install centos-release-ceph-nautilus --enablerepo=extras

and worked fine.

This one should installed ceph-common but cannot find many dependencies

yum install ceph-common
Loaded plugins: fastestmirror
centos-ceph-nautilus                                                                                                                                | 2.9 kB  00:00:00
centos-ceph-nautilus/7/x86_64/primary_db                                                                                                            |  62 kB  00:00:00
Loading mirror speeds from cached hostfile
 * centos-ceph-nautilus: mirrors.prometeus.net
Resolving Dependencies
--> Running transaction check
---> Package ceph-common.x86_64 2:14.2.0-1.el7 will be installed
--> Processing Dependency: python-rgw = 2:14.2.0-1.el7 for package: 2:ceph-common-14.2.0-1.el7.x86_64

... [CUT] ...

Error: Package: 2:librgw2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: leveldb-1.12.0-5.el7.1.x86_64 (centos-ceph-nautilus)
           Requires: libsnappy.so.1()(64bit)
Error: Package: 2:libcephfs2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: liblz4.so.1()(64bit)
Error: Package: 2:libradosstriper1-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: 2:librbd1-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: python-requests
Error: Package: 2:librgw2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
Error: Package: 2:librados2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: 2:libcephfs2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libfuse.so.2()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libsnappy.so.1()(64bit)
Error: Package: 2:librbd1-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
Error: Package: 2:librados2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1(RDMACM_1.0)(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librabbitmq.so.4()(64bit)
Error: Package: 2:libradosstriper1-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
Error: Package: 2:librgw2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librabbitmq.so.4()(64bit)
Error: Package: 2:librados2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libtcmalloc.so.4()(64bit)
Error: Package: 2:librados2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1(IBVERBS_1.0)(64bit)
Error: Package: 2:librados2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1(IBVERBS_1.1)(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
 You could try using --skip-broken to work around the problem
 You could try running: rpm -Va --nofiles --nodigest

Of course I'm using a higher version of Ceph than your post.
Any hint anyway?

maxcuttins

Ok, solved.
Of course Ceph need Epel and Base repo enabled.

This worked:

yum install epel-release -y --enablerepo=extras
yum install ceph-common --enablerepo='centos-ceph-nautilus' --enablerepo='epel' --enablerepo='base'

maxcuttins

@r1 said in CEPH FS Storage Driver:

patch -p0 < ceph.patch

This went not so smooth, reporting "unexpected end":

patch -p0 < ceph.patch
patching file /opt/xensource/sm/nfs.py
patching file /opt/xensource/sm/NFSSR.py
patch unexpectedly ends in middle of line
Hunk #3 succeeded at 197 with fuzz 1.

r1

Hi @maxcuttins - what's your XCP-NG version and can you share checksum for your NFSSR.py file?

Rainer

Hi,

I also play around with xcp-ng and ceph and just tried to use CephFS as a storage repos. I am using XCP-ng 8.0.0 with Ceph Nautilus. Before I tried to use lvm on top of a rbd which basically works but performance is really bad this way.

So I downloaded your patch and ran it on my test 8.0.0 xenserver, all Hunks succeeded. ceph is also installed, modprobe ceph works. Next I tried to add a new cephFs repository just as you described it above.

In the end I see an error box pooping up in XencCenter: "SM has thrown a generic python exception". And thats all.

In /var/log/SMlog I see the log attached below.

Thanks
Rainer

/var/log/SMLog:

Sep 26 09:42:54 rzinstal4 SM: [18075] lock: opening lock file /var/lock/sm/d63d0d49-522d-6160-a1eb-a9d5f34cec1e/sr
Sep 26 09:42:54 rzinstal4 SM: [18075] lock: acquired /var/lock/sm/d63d0d49-522d-6160-a1eb-a9d5f34cec1e/sr
Sep 26 09:42:54 rzinstal4 SM: [18075] sr_create {'sr_uuid': 'd63d0d49-522d-6160-a1eb-a9d5f34cec1e', 'subtask_of': 'DummyRef:|55cbc4ef-c6e9-4dba-aa5f-8f56b2473443|SR.create', 'args': ['0'], 'host_ref': 'OpaqueRef:0c03f516-7ed5-48ac-895b-51833177aed5', 'session_ref': 'OpaqueRef:d472846e-c6aa-467d-ac8b-0f401fbc698c', 'device_config': {'server': 'ip_of_mon', 'SRmaster': 'true', 'serverpath': '/sds', 'options': 'name=admin,secretfile=/etc/ceph/admin.secret'}, 'command': 'sr_create', 'sr_ref': 'OpaqueRef:9fb35d75-a45c-4ce4-b9f4-8ed8072ad6ad'}
Sep 26 09:42:54 rzinstal4 SM: [18075] ['/usr/sbin/rpcinfo', '-p', 'ip_of_mon']
Sep 26 09:42:54 rzinstal4 SM: [18075] FAILED in util.pread: (rc 1) stdout: '', stderr: 'rpcinfo: can't contact portmapper: RPC: Remote system error - Connection refused
Sep 26 09:42:54 rzinstal4 SM: [18075] '
Sep 26 09:42:54 rzinstal4 SM: [18075] Unable to obtain list of valid nfs versions
Sep 26 09:42:54 rzinstal4 SM: [18075] lock: released /var/lock/sm/d63d0d49-522d-6160-a1eb-a9d5f34cec1e/sr
Sep 26 09:42:54 rzinstal4 SM: [18075] ***** generic exception: sr_create: EXCEPTION <type 'exceptions.TypeError'>, not all arguments converted during string formatting
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 110, in run
Sep 26 09:42:54 rzinstal4 SM: [18075]     return self._run_locked(sr)
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 159, in _run_locked
Sep 26 09:42:54 rzinstal4 SM: [18075]     rv = self._run(sr, target)
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 323, in _run
Sep 26 09:42:54 rzinstal4 SM: [18075]     return sr.create(self.params['sr_uuid'], long(self.params['args'][0]))
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/NFSSR", line 216, in create
Sep 26 09:42:54 rzinstal4 SM: [18075]     raise exn
Sep 26 09:42:54 rzinstal4 SM: [18075]
Sep 26 09:42:54 rzinstal4 SM: [18075] ***** NFS VHD: EXCEPTION <type 'exceptions.TypeError'>, not all arguments converted during string formatting
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 372, in run
Sep 26 09:42:54 rzinstal4 SM: [18075]     ret = cmd.run(sr)
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 110, in run
Sep 26 09:42:54 rzinstal4 SM: [18075]     return self._run_locked(sr)
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 159, in _run_locked
Sep 26 09:42:54 rzinstal4 SM: [18075]     rv = self._run(sr, target)
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 323, in _run
Sep 26 09:42:54 rzinstal4 SM: [18075]     return sr.create(self.params['sr_uuid'], long(self.params['args'][0]))
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/NFSSR", line 216, in create
Sep 26 09:42:54 rzinstal4 SM: [18075]     raise exn
Sep 26 09:42:54 rzinstal4 SM: [18075]
Sep 26 09:42:54 rzinstal4 SM: [18075] lock: closed /var/lock/sm/d63d0d49-522d-6160-a1eb-a9d5f34cec1e/sr

olivierlambert

Hi @Rainer and welcome

Please use Markdown syntax for console/code blocks:

```
my test
```

Rainer

Hello oliverlambert,
thanks for the hint. I edited my post correcting the formatting.

r1

@Rainer Please share your NFSSR.py to check. Are you able to manually mount the SR using #mount.ceph addr1,addr2,addr3,addr4:remotepath localpath?

Rainer

Hello,

thanks for your answer. I can mount the the CephFS filesystem on the xenserver this way:

mount.ceph  1.2.3.4:/base /mnt -o "name=admin,secretfile=/etc/ceph/admin.secret"

where 1.2.3.4 is the IP of the active ceph monitor.

In xencenters New-SR-dialog I put the "1.2.3.4:/base" part in the "Share Name" input field and the options name=admin,secretfile=/etc/ceph/admin.secret in the "Advanced Options" field .

Below I attached my patched /opt/xensource/sm/NFSSR.py file:
[0_1569574207746_NFSSR.py](Uploading 100%)

NFSSR.py.txt

r1

Just so you know - the original patch was for XCP-NG 7.6. I'm checking it for XCP-NG 8.

r1

Can you share /opt/xensource/sm/nfs.py as well... it was also supposed to be patched.

r1

Updated new patch for XCP-NG 8.

olivierlambert

Note that all are hacks are won't survive any upgrade and aren't supported But it's fine for a proof of concept.

r1

Agree - unless we have enough interest from community to pack it or make it maintainable, it will stay a hack.

Also mentioning the command to apply patch # patch -d/ -p1 < cephfs-8.patch

Edit : updated patch strip level

Rainer

Hello and thanks for the new patch. I understand that this is only a kind of hack or better a proof of concept. I do not want to use this for a productive system but only wanted to give it a try with nautilus and see what performance I can expect if this hack hopefully develops to a supported integration of Ceph.

I hoped that the patch might work for XCP-ng 8.0 as well but it seems it does not that easily. So I could also install a xenserver 7.6 and use the original patch and test how it works for me. I do not want you to invest too much work in the 8.0 adoption. So if you think testing the patch 8.0 does not really help you in any way, then please do not hesitate and tell me. Else if you are as well interested to test if it works with 8.0 here is what I found out:

The new patch does not work completely, there is a "patch unexpectedly ends in middle of line" -warning. On a fresh installed system:

# cd /
# patch --verbose -p0  < /cephfs-8.patch
mm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- /opt/xensource/sm/nfs.py   20199-27 16:45:11.918853933 +0530
|+++ /opt/xensource/sm/nfs.py   20199-27 16:49:26.910379515 +0530
--------------------------
patching file /opt/xensource/sm/nfs.py
Using Plan A...
Hunk #1 succeeded at 137.
Hunk #2 succeeded at 159.
Hmm...  The next patch looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- /opt/xensource/sm/NFSSR.py 20199-27 16:44:56.437557255 +0530
|+++ /opt/xensource/sm/NFSSR.py 20199-27 17:07:45.651188670 +0530
--------------------------
patching file /opt/xensource/sm/NFSSR.py
Using Plan A...
Hunk #1 succeeded at 137.
Hunk #2 succeeded at 160.
patch unexpectedly ends in middle of line
Hunk #3 succeeded at 197 with fuzz 1.
done

I can do a ceph.mount just like described before but when I instead try to create a new Ceph-FS-SR named "Ceph" in xencenter 8.0.0 I still get the error that SM has thrown a generic python exception.

The SMlog error log indicates that creating a NFS repos is tried with the given parameters and not a CephFS one:

...
Sep 30 13:03:05 rzinstal4 SM: [975] sr_create {'sr_uuid': '79cc55db-ee9f-9cc0-8d94-8cdb2915363b', 'subtask_of': 'DummyRef:|6456510f-b2dd-4dcd-b6ab-eb5eb40ceb9c|SR.create', 'args': ['0'], 'host_ref': 'OpaqueRef:72898e54-20b2-4046-9825-94553457fa60', 'session_ref': 'OpaqueRef:8a0819af-8b91-4086-a9cf-04ae37dc8e79', 'device_config': {'server': '1.2.3.4', 'SRmaster': 'true', 'serverpath': '/base', 'options': 'name=admin,secretfile=/etc/ceph/admin.secret'}, 'command': 'sr_create', 'sr_ref': 'OpaqueRef:91c592f6-47a0-40d6-8a33-7fe01831145f'}
Sep 30 13:03:05 rzinstal4 SM: [975] ['/usr/sbin/rpcinfo', '-p', '1.2.3.4']
Sep 30 13:03:05 rzinstal4 SM: [975] FAILED in util.pread: (rc 1) stdout: '', stderr: 'rpcinfo: can't contact portmapper: RPC: Remote system error - Connection refused
Sep 30 13:03:05 rzinstal4 SM: [975] '
Sep 30 13:03:05 rzinstal4 SM: [975] Unable to obtain list of valid nfs versions
...

I attached my /opt/xensource/sm/nfs.py file as well.

Thanks a lot

Rainer
nfs.py.txt

r1

@r1 said in CEPH FS Storage Driver:

patch -d/ -p0 < cephfs-8.patch

Please try # patch -d/ -p0 < cephfs-8.patch

r1

I see that there is a call to check_server_tcp which is expected to return True but not doing so in my patch. I'll modify it.

r1

The same patch is updated. Kindly download again and try with # patch -d/ -p1 < cephfs-8.patch.

Rainer

Thanks for the new patch. Applying the patch does not report any errors or warnings. When I try to create a "NFS" SR I still get the generic python error message from xencenter however the error message in /var/log/SMlog has changed:

Oct  1 10:17:52 xenserver8 SM: [4975] lock: opening lock file /var/lock/sm/76ad6fee-a7a8-34e6-bcce-a53f69a677a9/sr
Oct  1 10:17:52 xenserver8 SM: [4975] lock: acquired /var/lock/sm/76ad6fee-a7a8-34e6-bcce-a53f69a677a9/sr
Oct  1 10:17:52 xenserver8 SM: [4975] sr_create {'sr_uuid': '76ad6fee-a7a8-34e6-bcce-a53f69a677a9', 'subtask_of': 'DummyRef:|c98cee36-24ff-4575-b7
43-3a84cd93ed17|SR.create', 'args': ['0'], 'host_ref': 'OpaqueRef:72898e54-20b2-4046-9825-94553457fa60', 'session_ref': 'OpaqueRef:175293cb-a791-
44be-bd5f-a4cb911adddb', 'device_config': {'server': '1.2.3.4', 'SRmaster': 'true', 'serverpath': '/base', 'options': 'name=admin,secretfil
e=/etc/ceph/admin.secret'}, 'command': 'sr_create', 'sr_ref': 'OpaqueRef:a36f0371-1dc7-4685-a208-24e04a1c1e08'}
Oct  1 10:17:52 xenserver8 SM: [4975] lock: released /var/lock/sm/76ad6fee-a7a8-34e6-bcce-a53f69a677a9/sr
Oct  1 10:17:52 xenserver8 SM: [4975] ***** generic exception: sr_create: EXCEPTION <type 'exceptions.NameError'>, global name 'useroptions' is no
t defined
Oct  1 10:17:52 xenserver8 SM: [4975]   File "/opt/xensource/sm/SRCommand.py", line 110, in run
Oct  1 10:17:52 xenserver8 SM: [4975]     return self._run_locked(sr)
Oct  1 10:17:52 xenserver8 SM: [4975]   File "/opt/xensource/sm/SRCommand.py", line 159, in _run_locked
Oct  1 10:17:52 xenserver8 SM: [4975]     rv = self._run(sr, target)
Oct  1 10:17:52 xenserver8 SM: [4975]   File "/opt/xensource/sm/SRCommand.py", line 323, in _run
Oct  1 10:17:52 xenserver8 SM: [4975]     return sr.create(self.params['sr_uuid'], long(self.params['args'][0]))
Oct  1 10:17:52 xenserver8 SM: [4975]   File "/opt/xensource/sm/NFSSR", line 216, in create
Oct  1 10:17:52 xenserver8 SM: [4975]     raise exn
Oct  1 10:17:52 xenserver8 SM: [4975]
Oct  1 10:17:52 xenserver8 SM: [4975] ***** NFS VHD: EXCEPTION <type 'exceptions.NameError'>, global name 'useroptions' is not defined
Oct  1 10:17:52 xenserver8 SM: [4975]   File "/opt/xensource/sm/SRCommand.py", line 372, in run
Oct  1 10:17:52 xenserver8 SM: [4975]     return self._run_locked(sr)
Oct  1 10:17:52 xenserver8 SM: [4975]   File "/opt/xensource/sm/SRCommand.py", line 159, in _run_locked
Oct  1 10:17:52 xenserver8 SM: [4975]     rv = self._run(sr, target)
Oct  1 10:17:52 xenserver8 SM: [4975]   File "/opt/xensource/sm/SRCommand.py", line 323, in _run
Oct  1 10:17:52 xenserver8 SM: [4975]     return sr.create(self.params['sr_uuid'], long(self.params['args'][0]))
Oct  1 10:17:52 xenserver8 SM: [4975]   File "/opt/xensource/sm/NFSSR", line 216, in create
Oct  1 10:17:52 xenserver8 SM: [4975]     raise exn
Oct  1 10:17:52 xenserver8 SM: [4975]

r1

Looks like variable declaration issue. I had it working for XCP-NG 7.6... Give me some time to fix this and make it working for 8.0