VM Failing to Reboot
-
@kagbasi-ngc The fact that your VM still boots in Safe Mode means that there's still some drivers blocking Windows from booting in normal mode. Please enable boot logging by running
bcdedit /store bcd /set {default} bootlog yesthen post the boot logs of normal mode versus safe mode. This log is found atC:\Windows\ntbtlog.txt.Could you send another copy of your SYSTEM hive?
-
@dinhngtu Just to clarify, the VM isn't booting into Safe Mode; I have to trigger it by smashing the F8 key at boot. It boots normally then goes to the BSOD.
I will get the logs for you shortly. Do you want me to drop them in the same location you sent earlier?
-
@kagbasi-ngc Just to confirm, if you use the F8 menu it boots into Safe Mode without getting a BSOD, right? Please upload the SYSTEM hive to the same location.
-
@dinhngtu Yes, it does. The only time I get the BSOD is if I allow the VM to boot normally without interfering.
-
@dinhngtu So I managed to enable the boot logging, allowed the VM to do a normally boot to BSOD, then I booted with Hiren's, however, I'm not seeing the log file at C:\Windows.
-
@kagbasi-ngc You might need the debugger in normal mode. Attach the debugger right at boot time and run the following command (beware the exact spelling):
sxe -c "lm1mna (poi(rdx));g" ldClick Go until Windows loads completely or until you get a VM crash in Windbg, then paste the entire Windbg output.
-
@dinhngtu sorry for the delayed response, having trouble getting the debugger to reattach. I've re-input all the boot parameters, yet still, no data is being piped to the debug port on the host.
Do you think perhaps the removal of the drivers we did yesterday has removed the VM's ability to talk to the host?
-
@kagbasi-ngc It shouldn't, the debugger drivers are built into Windows. If you're having issues with attaching the debugger, you can get into the F8 menu, start attaching WinDbg then choose Debugging mode in the F8 menu to start the guest. This should give WinDbg the correct timing to attach to the guest.
-
@dinhngtu thanks for the pointers, but nothing I'm doing seems to be working. The debugger seems to have connected to the host successful, but the VM isn't transmitting any data to the debugport.
-
@kagbasi-ngc Does it get stuck at "Waiting to reconnect..."? Do you get anything when telnet-ing to the VM's serial port?
-
@dinhngtu Yes (see image below). I'm on my way back to the office now, should be there in about 45 mins and will try telnet to the host tcp port 7001 and see what I get.
-
@dinhngtu said in VM Failing to Reboot:
Do you get anything when telnet-ing to the VM's serial port?
Sorry for the delayed response. I just attempted to telnet to the VM's serial port on the host, while watching IPTables, and here's the behavior I observed:
-
The PuTTY telnet session remains open while the VM is powered up and attempting to boot.
-
As soon as the BSOD is encountered and the VM powers off, the telnet session window terminates.
-
While watching IPTables, I can see the pkts count increment by 5 each time I attempt a connection.
Given the above observations, I'm convinced that the host is setup correctly, but it's the VM that is not dumping any data to the serial console on the host.
This is the IPTables rule I was watching:
Chain xapi-INPUT (1 references) pkts bytes target prot opt in out source destination 70 3636 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 ctstate NEW tcp dpt:7001 -
-
@kagbasi-ngc Could you check
bcdedit /store bcd /enum all(you can do this from Safe Mode, just dobcdedit /enum all) to see if the debugger settings are still there? For reference, it should look like:Windows Boot Loader ------------------- identifier {current} ... debug Yes ... Debugger Settings ----------------- identifier {dbgsettings} debugtype Serial debugport 1 baudrate 115200 -
@dinhngtu Checking now.
As soon as I selected
Safe Mode with Command Prompt, the following came up. So I'm waiting for it to finish.
-
@dinhngtu said in VM Failing to Reboot:
@kagbasi-ngc Could you check
bcdedit /store bcd /enum all(you can do this from Safe Mode, just dobcdedit /enum all) to see if the debugger settings are still there? For reference, it should look like:Here you go. As far as I can tell, the settings are there.
Firmware Boot Manager --------------------- identifier {fwbootmgr} displayorder {869b8842-cfa5-11ef-88bd-6690debbc340} {bootmgr} {4953fce7-d2e8-11ef-9050-806e6f6e6963} {68f8db89-dac7-11ef-b603-806e6f6e6963} {869b8841-cfa5-11ef-88bd-6690debbc340} {869b8846-cfa5-11ef-88bd-6690debbc340} {cc338294-d2fd-11ef-904b-806e6f6e6963} {869b8844-cfa5-11ef-88bd-6690debbc340} timeout 0 Windows Boot Manager -------------------- identifier {bootmgr} device partition=S: path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale en-US inherit {globalsettings} bootshutdowndisabled Yes default {default} resumeobject {869b8847-cfa5-11ef-88bd-6690debbc340} displayorder {default} toolsdisplayorder {memdiag} timeout 30 Firmware Application (101fffff) ------------------------------- identifier {4953fce7-d2e8-11ef-9050-806e6f6e6963} description UEFI Misc Device 2 Firmware Application (101fffff) ------------------------------- identifier {68f8db89-dac7-11ef-b603-806e6f6e6963} description UEFI Misc Device 3 Firmware Application (101fffff) ------------------------------- identifier {869b8841-cfa5-11ef-88bd-6690debbc340} description UiApp Firmware Application (101fffff) ------------------------------- identifier {869b8842-cfa5-11ef-88bd-6690debbc340} description UEFI Misc Device Firmware Application (101fffff) ------------------------------- identifier {869b8844-cfa5-11ef-88bd-6690debbc340} description UEFI PXEv6 (MAC:7E30B1BB2307) Firmware Application (101fffff) ------------------------------- identifier {869b8846-cfa5-11ef-88bd-6690debbc340} description EFI Internal Shell Firmware Application (101fffff) ------------------------------- identifier {cc338294-d2fd-11ef-904b-806e6f6e6963} description UEFI PXEv4 (MAC:7E30B1BB2307) Windows Boot Loader ------------------- identifier {default} device partition=C: path \windows\system32\winload.efi description Windows Server locale en-US inherit {bootloadersettings} recoverysequence {ad69be4c-cf8c-11ef-9047-6690debbc340} displaymessageoverride Recovery recoveryenabled Yes isolatedcontext Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \windows resumeobject {869b8847-cfa5-11ef-88bd-6690debbc340} nx OptOut bootlog Yes Windows Boot Loader ------------------- identifier {ad69be4c-cf8c-11ef-9047-6690debbc340} device ramdisk=[\Device\HarddiskVolume4]\Recovery\WindowsRE\Winre.wim,{ad69be4d-cf8c-11ef-9047-6690debbc340} path \windows\system32\winload.efi description Windows Recovery Environment locale en-US inherit {bootloadersettings} displaymessage Recovery osdevice ramdisk=[\Device\HarddiskVolume4]\Recovery\WindowsRE\Winre.wim,{ad69be4d-cf8c-11ef-9047-6690debbc340} systemroot \windows nx OptIn bootmenupolicy Standard winpe Yes Resume from Hibernate --------------------- identifier {869b8847-cfa5-11ef-88bd-6690debbc340} device partition=C: path \windows\system32\winresume.efi description Windows Resume Application locale en-US inherit {resumeloadersettings} recoverysequence {ad69be4c-cf8c-11ef-9047-6690debbc340} recoveryenabled Yes isolatedcontext Yes allowedinmemorysettings 0x15000075 filedevice partition=C: custom:21000026 partition=C: filepath \hiberfil.sys debugoptionenabled No Windows Memory Tester --------------------- identifier {memdiag} device partition=S: path \EFI\Microsoft\Boot\memtest.efi description Windows Memory Diagnostic locale en-US inherit {globalsettings} badmemoryaccess Yes EMS Settings ------------ identifier {emssettings} bootems Yes Debugger Settings ----------------- identifier {dbgsettings} debugtype Serial debugport 1 baudrate 115200 RAM Defects ----------- identifier {badmemory} Global Settings --------------- identifier {globalsettings} inherit {dbgsettings} {emssettings} {badmemory} Boot Loader Settings -------------------- identifier {bootloadersettings} inherit {globalsettings} {hypervisorsettings} Hypervisor Settings ------------------- identifier {hypervisorsettings} hypervisordebugtype Serial hypervisordebugport 1 hypervisorbaudrate 115200 Resume Loader Settings ---------------------- identifier {resumeloadersettings} inherit {globalsettings} Device options -------------- identifier {ad69be4d-cf8c-11ef-9047-6690debbc340} description Windows Recovery ramdisksdidevice partition=\Device\HarddiskVolume4 ramdisksdipath \Recovery\WindowsRE\boot.sdi -
@kagbasi-ngc
{dbgsettings}are there but{default}/debugis not set to Yes. -
@dinhngtu My apologies for the delayed response. Got busy with several meetings.
So, I finally got the debugger to attach to the VM (after many tries). I was able to capture some logs, but was not able to get any response to the command you asked me to run:
sxe -c "lm1mna (poi(rdx));g" ldOne thing I did was to re-install the xen drivers, so you'll see them get loaded in the debug logs.
Another thing to also point out, I cloned the snapshot of this VM to a new VM and observed the following:
-
The cloned VM from snapshot booted up all the way into Windows, and I was able to login.
-
I noticed that the Start Menu would not open (after several clicks), even though the Windows Explorer opens. So, I initiated a reboot - this time using the XO restart button.
-
The VM went down for a reboot and got stuck in the same boot state (i.e., spinning wheel after the Windows splash logo). The VM's NIC comes up, however, because it starts responding to pings.
Anyway, here're the debug logs from the original VM:
************* Preparing the environment for Debugger Extensions Gallery repositories ************** ExtensionRepository : Implicit UseExperimentalFeatureForNugetShare : true AllowNugetExeUpdate : true NonInteractiveNuget : true AllowNugetMSCredentialProviderInstall : true AllowParallelInitializationOfLocalRepositories : true EnableRedirectToChakraJsProvider : false -- Configuring repositories ----> Repository : LocalInstalled, Enabled: true ----> Repository : UserExtensions, Enabled: true >>>>>>>>>>>>> Preparing the environment for Debugger Extensions Gallery repositories completed, duration 0.000 seconds ************* Waiting for Debugger Extensions Gallery to Initialize ************** >>>>>>>>>>>>> Waiting for Debugger Extensions Gallery to Initialize completed, duration 0.015 seconds ----> Repository : UserExtensions, Enabled: true, Packages count: 0 ----> Repository : LocalInstalled, Enabled: true, Packages count: 42 Microsoft (R) Windows Debugger Version 10.0.27725.1000 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Opened 10.0.10.12 Waiting to reconnect... Connected to Windows 10 20348 x64 target at (Tue Jan 28 20:04:11.011 2025 (UTC - 5:00)), ptr64 TRUE Kernel Debugger connection established. Symbol search path is: srv* Executable search path is: Windows 10 Kernel Version 20348 MP (1 procs) Free x64 Edition build lab: 20348.859.amd64fre.fe_release_svc_prod2.220707-1832 Kernel base = 0xfffff803`1be00000 PsLoadedModuleList = 0xfffff803`1ca33d20 System Uptime: 0 days 0:00:00.000 Unable to load image ntkrnlmp.exe, Win32 error 0n2 xen|LogReadLogLevel: fail1 (c0000034) xen|LogReadLogLevel: fail1 (c0000034) xen|DllInitialize: 9.1.9 (105) (10.09.2024) xen|AcpiFindRsdp: 0x00000000000EA020 xen|SystemInitialize: CPUs 2 / 4 xen|SystemGetStartOptions: NOEXECUTE=OPTOUT BOOTLOG DEBUGPORT=COM1 BAUDRATE=115200 FVEBOOT=2670592 NOVGA DEBUG xen|SystemGetVersionInformation: KERNEL: 10.0 (BUILD 20348) PLATFORM WIN32_NT (x64) xen|SystemGetVersionInformation: SUITES: xen|SystemGetVersionInformation: - TERMINAL xen|SystemGetVersionInformation: - SINGLEUSERTS xen|SystemGetVersionInformation: TYPE: SERVER xen|SystemGetMemoryInformation: RANGE[0] 00000000.00001000 - 00000000.0009ffff xen|SystemGetMemoryInformation: RANGE[1] 00000000.00100000 - 00000000.ee4fbfff xen|SystemGetMemoryInformation: RANGE[2] 00000000.ee4fd000 - 00000000.ee510fff xen|SystemGetMemoryInformation: RANGE[3] 00000000.ee51b000 - 00000000.ef59afff xen|SystemGetMemoryInformation: RANGE[4] 00000000.ef5ff000 - 00000000.effdefff xen|SystemGetMemoryInformation: RANGE[5] 00000000.effff000 - 00000000.efffffff xen|SystemGetMemoryInformation: RANGE[6] 00000001.00000000 - 00000004.0f7fffff xen|SystemGetMemoryInformation: MaximumPhysicalAddress = 00000004.0f7fffff xen|AcpiGetXsdt: 0x00000000FC00A5E0 xen|SystemProcessorDpc: ====> (0:0) xen|SystemViridianInformation: ====> xen|SystemViridianInformation: Interface Identifier: Hv#1 xen|SystemViridianInformation: Hypervisor Features: xen|SystemViridianInformation: - Partition Reference Counter xen|SystemViridianInformation: - Basic SynIC MSRs xen|SystemViridianInformation: - Synthetic Timer MSRs xen|SystemViridianInformation: - APIC Access MSRs xen|SystemViridianInformation: - Hypercall MSRs xen|SystemViridianInformation: - Virtual Processor Index MSR xen|SystemViridianInformation: - Partition Reference TSC MSR xen|SystemViridianInformation: - Timer Frequency MSR xen|SystemViridianInformation: Recommendations: xen|SystemViridianInformation: - EOI, ICR and TPR access via MSR xen|SystemViridianInformation: - Use relaxed timing xen|SystemViridianInformation: - Retry spinlocks 2047 times xen|SystemViridianInformation: Hardware Features: xen|SystemViridianInformation: - APIC overlay assist xen|SystemViridianInformation: - MSR bitmaps xen|SystemViridianInformation: - Second Level Address Translation (SLAT) xen|SystemViridianInformation: <==== xen|SystemProcessorInitialize: Manufacturer: GenuineIntel xen|SystemProcessorInitialize: APIC ID: 00 xen|SystemProcessorInitialize: PROCESSOR ID: 00 xen|SystemProcessorDpc: <==== (0:0) xen|SystemProcessorDpc: ====> (0:1) xen|SystemProcessorInitialize: Manufacturer: GenuineIntel xen|SystemProcessorInitialize: APIC ID: 02 xen|SystemProcessorInitialize: PROCESSOR ID: 01 xen|SystemProcessorDpc: <==== (0:1) xen|SystemGetTimeInformation: FALSE xen|ModuleAdd: FFFFF8031BE00000 - FFFFF8031CE46FFF [ntoskrnl.exe] xen|ModuleAdd: FFFFF80319DA0000 - FFFFF80319DA5FFF [hal.dll] xen|ModuleAdd: FFFFF80319DB0000 - FFFFF80319DBDFFF [kdcom.dll] xen|ModuleAdd: FFFFF803199F0000 - FFFFF80319D73FFF [mcupdate_GenuineIntel.dll] xen|ModuleAdd: FFFFF8031F200000 - FFFFF8031F26CFFF [CLFS.SYS] xen|ModuleAdd: FFFFF80319DC0000 - FFFFF80319DE7FFF [tm.sys] xen|ModuleAdd: FFFFF8031F270000 - FFFFF8031F289FFF [PSHED.dll] xen|ModuleAdd: FFFFF80319DF0000 - FFFFF80319DFAFFF [BOOTVID.dll] xen|ModuleAdd: FFFFF8031F3B0000 - FFFFF8031F420FFF [FLTMGR.SYS] xen|ModuleAdd: FFFFF8031F460000 - FFFFF8031F4C1FFF [msrpc.sys] xen|ModuleAdd: FFFFF8031F430000 - FFFFF8031F458FFF [ksecdd.sys] xen|ModuleAdd: FFFFF8031F290000 - FFFFF8031F3A2FFF [clipsp.sys] xen|ModuleAdd: FFFFF8031F4D0000 - FFFFF8031F4DDFFF [cmimcext.sys] xen|ModuleAdd: FFFFF8031F4E0000 - FFFFF8031F4F0FFF [werkernel.sys] xen|ModuleAdd: FFFFF8031F500000 - FFFFF8031F50BFFF [ntosext.sys] xen|ModuleAdd: FFFFF8031F510000 - FFFFF8031F5F4FFF [CI.dll] xen|ModuleAdd: FFFFF8031F600000 - FFFFF8031F6BAFFF [cng.sys] xen|ModuleAdd: FFFFF8031F6C0000 - FFFFF8031F79CFFF [Wdf01000.sys] xen|ModuleAdd: FFFFF8031F7A0000 - FFFFF8031F7B3FFF [WDFLDR.SYS] xen|ModuleAdd: FFFFF8031F7C0000 - FFFFF8031F7CCFFF [PRM.sys] xen|ModuleAdd: FFFFF8031F7D0000 - FFFFF8031F7F5FFF [acpiex.sys] xen|ModuleAdd: FFFFF8031F800000 - FFFFF8031F810FFF [WppRecorder.sys] xen|ModuleAdd: FFFFF8031F820000 - FFFFF8031F82DFFF [msseccore.sys] xen|ModuleAdd: FFFFF8031F830000 - FFFFF8031F84AFFF [SgrmAgent.sys] xen|ModuleAdd: FFFFF8031F850000 - FFFFF8031F91AFFF [ACPI.sys] xen|ModuleAdd: FFFFF8031F920000 - FFFFF8031F92BFFF [WMILIB.SYS] xen|ModuleAdd: FFFFF8031F930000 - FFFFF8031F940FFF [WdBoot.sys] xen|ModuleAdd: FFFFF8031F950000 - FFFFF8031F966FFF [WindowsTrustedRT.sys] xen|ModuleAdd: FFFFF8031F970000 - FFFFF8031F9DAFFF [intelpep.sys] xen|ModuleAdd: FFFFF8031F9E0000 - FFFFF8031F9EAFFF [WindowsTrustedRTProxy.sys] xen|ModuleAdd: FFFFF8031F9F0000 - FFFFF8031F9FAFFF [IntelPMT.sys] xen|ModuleAdd: FFFFF8031FA00000 - FFFFF8031FA14FFF [pcw.sys] xen|ModuleAdd: FFFFF8031FA20000 - FFFFF8031FA3DFFF [sacdrv.sys] xen|ModuleAdd: FFFFF8031FAE0000 - FFFFF8031FC5BFFF [NDIS.SYS] xen|ModuleAdd: FFFFF8031FA40000 - FFFFF8031FADDFFF [NETIO.SYS] xen|ModuleAdd: FFFFF8031FC60000 - FFFFF8031FC6AFFF [msisadrv.sys] xen|ModuleAdd: FFFFF8031FC70000 - FFFFF8031FC85FFF [vdrvroot.sys] xen|ModuleAdd: FFFFF8031FC90000 - FFFFF8031FD13FFF [pci.sys] xen|ModuleAdd: FFFFF8031FD20000 - FFFFF8031FD50FFF [xenbus.sys] xen|ModuleAdd: FFFFF8031FD60000 - FFFFF8031FD80FFF [xen.sys] xen|ModuleAdd: FFFFF8031FD90000 - FFFFF8031FDA0FFF [xenfilt.sys] xen|ModuleAdd: FFFFF8031FDB0000 - FFFFF8031FDDEFFF [pdc.sys] xen|ModuleAdd: FFFFF8031FDE0000 - FFFFF8031FDF7FFF [CEA.sys] xen|ModuleAdd: FFFFF8031FE00000 - FFFFF8031FE30FFF [partmgr.sys] xen|ModuleAdd: FFFFF8031FE40000 - FFFFF8031FF0BFFF [spaceport.sys] xen|ModuleAdd: FFFFF8031FF10000 - FFFFF8031FF29FFF [volmgr.sys] xen|ModuleAdd: FFFFF8031FF30000 - FFFFF8031FF92FFF [volmgrx.sys] xen|ModuleAdd: FFFFF8031FFA0000 - FFFFF8031FFAAFFF [intelide.sys] xen|ModuleAdd: FFFFF8031FFB0000 - FFFFF8031FFC2FFF [PCIIDEX.SYS] xen|ModuleAdd: FFFFF8031FFD0000 - FFFFF8031FFEDFFF [mountmgr.sys] xen|ModuleAdd: FFFFF8031FFF0000 - FFFFF8031FFFCFFF [atapi.sys] xen|ModuleAdd: FFFFF80320000000 - FFFFF8032003BFFF [ataport.SYS] xen|ModuleAdd: FFFFF80320040000 - FFFFF80320075FFF [stornvme.sys] xen|ModuleAdd: FFFFF80320080000 - FFFFF8032014AFFF [storport.sys] xen|ModuleAdd: FFFFF80320150000 - FFFFF8032016BFFF [xenvbd.sys] xen|ModuleAdd: FFFFF80320170000 - FFFFF803201A9FFF [xencrsh.sys] xen|ModuleAdd: FFFFF803201B0000 - FFFFF803201BDFFF [xendisk.sys] xen|ModuleAdd: FFFFF803201C0000 - FFFFF803201E1FFF [EhStorClass.sys] xen|ModuleAdd: FFFFF803201F0000 - FFFFF80320231FFF [Wof.sys] xen|ModuleAdd: FFFFF80320240000 - FFFFF803202A9FFF [WdFilter.sys] xen|ModuleAdd: FFFFF803202B0000 - FFFFF803205C0FFF [Ntfs.sys] xen|ModuleAdd: FFFFF803205D0000 - FFFFF803205DCFFF [Fs_Rec.sys] xen|ModuleAdd: FFFFF803205E0000 - FFFFF80320612FFF [ksecpkg.sys] xen|ModuleAdd: FFFFF80320620000 - FFFFF8032093EFFF [tcpip.sys] xen|ModuleAdd: FFFFF80320940000 - FFFFF803209C0FFF [fwpkclnt.sys] xen|ModuleAdd: FFFFF803209D0000 - FFFFF803209FFFFF [wfplwfs.sys] xen|ModuleAdd: FFFFF80320A10000 - FFFFF80320A1AFFF [volume.sys] xen|ModuleAdd: FFFFF80320A20000 - FFFFF80320A93FFF [volsnap.sys] xen|ModuleAdd: FFFFF80320AA0000 - FFFFF80320AC5FFF [mup.sys] xen|ModuleAdd: FFFFF80320AD0000 - FFFFF80320ADFFFF [hwpolicy.sys] xen|ModuleAdd: FFFFF80320AF0000 - FFFFF80320B0EFFF [disk.sys] xen|ModuleAdd: FFFFF80320B10000 - FFFFF80320B84FFF [CLASSPNP.SYS] xen|UnplugSetRequest: DISKS (0) xen|UnplugSetRequest: NICS (0) xenbus|DriverEntry: 9.1.9 (105) (10.09.2024) xen|LogReadLogLevel: fail1 (c0000034) xen|ConfigSetActive: PCI\VEN_5853&DEV_0002&SUBSYS_00015853&REV_01\18: \Registry\Machine\System\CurrentControlSet\Services\pci,65536,0,3,0 xenbus|FdoCreate: FFFFB889490CBC00 (XS0002 XENBUS) [ACTIVE] xen|FiltersInstallClass: DEVCLASS_SYSTEM XENFILT xen|FiltersInstallClass: DEVCLASS_HDC XENFILT xenbus|FdoConnectInterrupt: FFFFB889490D5910: Shared LevelSensitive CPU 0:0 VECTOR a1 xenbus|FdoConnectInterrupt: FFFFB889490D5B30: DeviceExclusive Latched CPU 0:0 VECTOR b1 xenbus|FdoConnectInterrupt: FFFFB889490D5D50: DeviceExclusive Latched CPU 0:1 VECTOR b1 xenbus|FdoScan: ====> xenbus|FdoSuspend: ====> xenbus|FdoBalloon: ====> xenbus|FdoPciHoleCreate: 000f0000 - 000f0fff xenbus|EvtchnAbiAcquire: FIFO xenbus|EvtchnInterruptEnable: CPU 0:0 (Vector = 177) xenbus|EvtchnInterruptEnable: CPU 0:1 (Vector = 177) xenbus|EvtchnInterruptEnable: CALLBACK VIA (Vector = 28) xenbus|GnttabExpand: added references [00000020 - 000001ff] xenbus|EvtchnFifoExpand: added ports [00000000 - 000003ff] xenbus|__FdoVirqCreate: DEBUG: CPU 0:0 xenbus|PdoCreate: FFFFB88948C7B540 (VBD) xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2 xenbus|PdoCreate: FFFFB88948D7F540 (VIF) xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2 xenbus|PdoCreate: FFFFB88948D7F870 (IFACE) xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2 xenfilt|DriverEntry: 9.1.9 (105) (10.09.2024) xenfilt|DriverAddDevice: FFFFB8894910B360 UNKNOWN xenfilt|DriverGetEmulatedType: MATCH: Internal_IDE_Channel -> IDE xenfilt|DriverAddDevice: FFFFB8894916BAB0 IDE xenfilt|FdoCreate: FFFFB88949170DA0 (PCIIDE\IDEChannel\0) xenfilt|DriverGetEmulatedType: MATCH: Internal_IDE_Channel -> IDE xenfilt|DriverAddDevice: FFFFB8894916C060 IDE xenfilt|FdoCreate: FFFFB88949176DA0 (PCIIDE\IDEChannel\1) xenfilt|PdoCreate: FFFFB889490E2510 (IDE\CdRomQEMU_QEMU_DVD-ROM_______________________2.5+____\1.1.0) Break instruction exception - code 80000003 (first chance) ******************************************************************************* * * * You are seeing this message because you pressed either * * CTRL+C (if you run console kernel debugger) or, * * CTRL+BREAK (if you run GUI kernel debugger), * * on your debugger machine's keyboard. * * * * THIS IS NOT A BUG OR A SYSTEM CRASH * * * * If you did not intend to break into the debugger, press the "g" key, then * * press the "Enter" key now. This message might immediately reappear. If it * * does, press "g" and "Enter" again. * * * ******************************************************************************* nt!DbgBreakPointWithStatus: fffff803`1c229560 cc int 3 0: kd> sxe -c "lm1mna (poi(rdx));g" ld 0: kd> g -
-
@kagbasi-ngc It seems like the debugger was attached a little late, after the Xen driver was loaded. Could you try attaching Windbg at the F8 menu instead?
Another thing to also point out, I cloned the snapshot of this VM to a new VM and observed the following:
-
The cloned VM from snapshot booted up all the way into Windows, and I was able to login.
-
I noticed that the Start Menu would not open (after several clicks), even though the Windows Explorer opens. So, I initiated a reboot - this time using the XO restart button.
-
The VM went down for a reboot and got stuck in the same boot state (i.e., spinning wheel after the Windows splash logo). The VM's NIC comes up, however, because it starts responding to pings.
This tells me perhaps something is wrong with your template VM itself. Could you build a new template VM without any prebaked drivers to see if it's a driver or group policy issue?
-
-
@dinhngtu I can certainly do that. I will be back in the lab in about 2 hours and will retry.
Concerning the template, hmmm....I was having the same thoughts, so I've pulled down a Windows Server 2022 ISO directly from Microsoft and I'm gonna build a new template with it, to see if the problem resurfaces. It's possible there's something in the Secure Host Baseline that is causing problems with this platform (not sure if it's XCP-ng, or Xen). However, if that ends up being the case, it would be a bummer as that would weaken my case for adoption of the Vates VMS.
In any case, I'll report back in a couple of hours.
-
@dinhngtu said in VM Failing to Reboot:
@kagbasi-ngc It seems like the debugger was attached a little late, after the Xen driver was loaded. Could you try attaching Windbg at the F8 menu instead?
As requested, I managed to attach Windbg at the F8 menu. Here's the output:
************* Preparing the environment for Debugger Extensions Gallery repositories ************** ExtensionRepository : Implicit UseExperimentalFeatureForNugetShare : true AllowNugetExeUpdate : true NonInteractiveNuget : true AllowNugetMSCredentialProviderInstall : true AllowParallelInitializationOfLocalRepositories : true EnableRedirectToChakraJsProvider : false -- Configuring repositories ----> Repository : LocalInstalled, Enabled: true ----> Repository : UserExtensions, Enabled: true >>>>>>>>>>>>> Preparing the environment for Debugger Extensions Gallery repositories completed, duration 0.000 seconds ************* Waiting for Debugger Extensions Gallery to Initialize ************** >>>>>>>>>>>>> Waiting for Debugger Extensions Gallery to Initialize completed, duration 0.032 seconds ----> Repository : UserExtensions, Enabled: true, Packages count: 0 ----> Repository : LocalInstalled, Enabled: true, Packages count: 42 Microsoft (R) Windows Debugger Version 10.0.27725.1000 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Opened 10.0.10.12 Waiting to reconnect... Connected to Windows 10 20348 x64 target at (Wed Jan 29 20:06:47.664 2025 (UTC - 5:00)), ptr64 TRUE Kernel Debugger connection established. Symbol search path is: srv* Executable search path is: Windows 10 Kernel Version 20348 MP (1 procs) Free x64 Edition build lab: 20348.859.amd64fre.fe_release_svc_prod2.220707-1832 Kernel base = 0xfffff802`6c600000 PsLoadedModuleList = 0xfffff802`6d233d20 System Uptime: 0 days 0:00:00.000 Unable to load image ntkrnlmp.exe, Win32 error 0n2 xen|LogReadLogLevel: fail1 (c0000034) xen|LogReadLogLevel: fail1 (c0000034) xen|DllInitialize: 9.1.9 (105) (10.09.2024) xen|AcpiFindRsdp: 0x00000000000EA020 xen|SystemInitialize: CPUs 2 / 4 xen|SystemGetStartOptions: NOEXECUTE=OPTOUT BOOTLOG DEBUGPORT=COM1 BAUDRATE=115200 FVEBOOT=2670592 NOVGA DEBUG xen|SystemGetVersionInformation: KERNEL: 10.0 (BUILD 20348) PLATFORM WIN32_NT (x64) xen|SystemGetVersionInformation: SUITES: xen|SystemGetVersionInformation: - TERMINAL xen|SystemGetVersionInformation: - SINGLEUSERTS xen|SystemGetVersionInformation: TYPE: SERVER xen|SystemGetMemoryInformation: RANGE[0] 00000000.00001000 - 00000000.0009ffff xen|SystemGetMemoryInformation: RANGE[1] 00000000.00100000 - 00000000.ee4fbfff xen|SystemGetMemoryInformation: RANGE[2] 00000000.ee4fd000 - 00000000.ee510fff xen|SystemGetMemoryInformation: RANGE[3] 00000000.ee51b000 - 00000000.ef59afff xen|SystemGetMemoryInformation: RANGE[4] 00000000.ef5ff000 - 00000000.effdefff xen|SystemGetMemoryInformation: RANGE[5] 00000000.effff000 - 00000000.efffffff xen|SystemGetMemoryInformation: RANGE[6] 00000001.00000000 - 00000004.0f7fffff xen|SystemGetMemoryInformation: MaximumPhysicalAddress = 00000004.0f7fffff xen|AcpiGetXsdt: 0x00000000FC00A5E0 xen|SystemProcessorDpc: ====> (0:0) xen|SystemViridianInformation: ====> xen|SystemViridianInformation: Interface Identifier: Hv#1 xen|SystemViridianInformation: Hypervisor Features: xen|SystemViridianInformation: - Partition Reference Counter xen|SystemViridianInformation: - Basic SynIC MSRs xen|SystemViridianInformation: - Synthetic Timer MSRs xen|SystemViridianInformation: - APIC Access MSRs xen|SystemViridianInformation: - Hypercall MSRs xen|SystemViridianInformation: - Virtual Processor Index MSR xen|SystemViridianInformation: - Partition Reference TSC MSR xen|SystemViridianInformation: - Timer Frequency MSR xen|SystemViridianInformation: Recommendations: xen|SystemViridianInformation: - EOI, ICR and TPR access via MSR xen|SystemViridianInformation: - Use relaxed timing xen|SystemViridianInformation: - Retry spinlocks 2047 times xen|SystemViridianInformation: Hardware Features: xen|SystemViridianInformation: - APIC overlay assist xen|SystemViridianInformation: - MSR bitmaps xen|SystemViridianInformation: - Second Level Address Translation (SLAT) xen|SystemViridianInformation: <==== xen|SystemProcessorInitialize: Manufacturer: GenuineIntel xen|SystemProcessorInitialize: APIC ID: 00 xen|SystemProcessorInitialize: PROCESSOR ID: 00 xen|SystemProcessorDpc: <==== (0:0) xen|SystemProcessorDpc: ====> (0:1) xen|SystemProcessorInitialize: Manufacturer: GenuineIntel xen|SystemProcessorInitialize: APIC ID: 02 xen|SystemProcessorInitialize: PROCESSOR ID: 01 xen|SystemProcessorDpc: <==== (0:1) xen|SystemGetTimeInformation: FALSE xen|ModuleAdd: FFFFF8026C600000 - FFFFF8026D646FFF [ntoskrnl.exe] xen|ModuleAdd: FFFFF8026B910000 - FFFFF8026B915FFF [hal.dll] xen|ModuleAdd: FFFFF8026B920000 - FFFFF8026B92DFFF [kdcom.dll] xen|ModuleAdd: FFFFF8026B560000 - FFFFF8026B8E3FFF [mcupdate_GenuineIntel.dll] xen|ModuleAdd: FFFFF8026B960000 - FFFFF8026B9CCFFF [CLFS.SYS] xen|ModuleAdd: FFFFF8026B930000 - FFFFF8026B957FFF [tm.sys] xen|ModuleAdd: FFFFF8026B9D0000 - FFFFF8026B9E9FFF [PSHED.dll] xen|ModuleAdd: FFFFF8026B9F0000 - FFFFF8026B9FAFFF [BOOTVID.dll] xen|ModuleAdd: FFFFF80270F20000 - FFFFF80270F90FFF [FLTMGR.SYS] xen|ModuleAdd: FFFFF80270FD0000 - FFFFF80271031FFF [msrpc.sys] xen|ModuleAdd: FFFFF80270FA0000 - FFFFF80270FC8FFF [ksecdd.sys] xen|ModuleAdd: FFFFF80270E00000 - FFFFF80270F12FFF [clipsp.sys] xen|ModuleAdd: FFFFF80271040000 - FFFFF8027104DFFF [cmimcext.sys] xen|ModuleAdd: FFFFF80271050000 - FFFFF80271060FFF [werkernel.sys] xen|ModuleAdd: FFFFF80271070000 - FFFFF8027107BFFF [ntosext.sys] xen|ModuleAdd: FFFFF80271080000 - FFFFF80271164FFF [CI.dll] xen|ModuleAdd: FFFFF80271170000 - FFFFF8027122AFFF [cng.sys] xen|ModuleAdd: FFFFF80271230000 - FFFFF8027130CFFF [Wdf01000.sys] xen|ModuleAdd: FFFFF80271310000 - FFFFF80271323FFF [WDFLDR.SYS] xen|ModuleAdd: FFFFF80271330000 - FFFFF8027133CFFF [PRM.sys] xen|ModuleAdd: FFFFF80271340000 - FFFFF80271365FFF [acpiex.sys] xen|ModuleAdd: FFFFF80271370000 - FFFFF80271380FFF [WppRecorder.sys] xen|ModuleAdd: FFFFF80271390000 - FFFFF8027139DFFF [msseccore.sys] xen|ModuleAdd: FFFFF802713A0000 - FFFFF802713BAFFF [SgrmAgent.sys] xen|ModuleAdd: FFFFF802713C0000 - FFFFF8027148AFFF [ACPI.sys] xen|ModuleAdd: FFFFF80271490000 - FFFFF8027149BFFF [WMILIB.SYS] xen|ModuleAdd: FFFFF802714A0000 - FFFFF802714B0FFF [WdBoot.sys] xen|ModuleAdd: FFFFF802714C0000 - FFFFF802714D6FFF [WindowsTrustedRT.sys] xen|ModuleAdd: FFFFF802714E0000 - FFFFF8027154AFFF [intelpep.sys] xen|ModuleAdd: FFFFF80271550000 - FFFFF8027155AFFF [WindowsTrustedRTProxy.sys] xen|ModuleAdd: FFFFF80271560000 - FFFFF8027156AFFF [IntelPMT.sys] xen|ModuleAdd: FFFFF80271570000 - FFFFF80271584FFF [pcw.sys] xen|ModuleAdd: FFFFF80271590000 - FFFFF802715ADFFF [sacdrv.sys] xen|ModuleAdd: FFFFF80271650000 - FFFFF802717CBFFF [NDIS.SYS] xen|ModuleAdd: FFFFF802715B0000 - FFFFF8027164DFFF [NETIO.SYS] xen|ModuleAdd: FFFFF802717D0000 - FFFFF802717DAFFF [msisadrv.sys] xen|ModuleAdd: FFFFF802717E0000 - FFFFF802717F5FFF [vdrvroot.sys] xen|ModuleAdd: FFFFF80271800000 - FFFFF80271883FFF [pci.sys] xen|ModuleAdd: FFFFF80271890000 - FFFFF802718C0FFF [xenbus.sys] xen|ModuleAdd: FFFFF802718D0000 - FFFFF802718F0FFF [xen.sys] xen|ModuleAdd: FFFFF80271900000 - FFFFF80271910FFF [xenfilt.sys] xen|ModuleAdd: FFFFF80271920000 - FFFFF8027194EFFF [pdc.sys] xen|ModuleAdd: FFFFF80271950000 - FFFFF80271967FFF [CEA.sys] xen|ModuleAdd: FFFFF80271970000 - FFFFF802719A0FFF [partmgr.sys] xen|ModuleAdd: FFFFF802719B0000 - FFFFF80271A7BFFF [spaceport.sys] xen|ModuleAdd: FFFFF80271A80000 - FFFFF80271A99FFF [volmgr.sys] xen|ModuleAdd: FFFFF80271AA0000 - FFFFF80271B02FFF [volmgrx.sys] xen|ModuleAdd: FFFFF80271B10000 - FFFFF80271B1AFFF [intelide.sys] xen|ModuleAdd: FFFFF80271B20000 - FFFFF80271B32FFF [PCIIDEX.SYS] xen|ModuleAdd: FFFFF80271B40000 - FFFFF80271B5DFFF [mountmgr.sys] xen|ModuleAdd: FFFFF80271B60000 - FFFFF80271B6CFFF [atapi.sys] xen|ModuleAdd: FFFFF80271B70000 - FFFFF80271BABFFF [ataport.SYS] xen|ModuleAdd: FFFFF80271BB0000 - FFFFF80271BE5FFF [stornvme.sys] xen|ModuleAdd: FFFFF80271BF0000 - FFFFF80271CBAFFF [storport.sys] xen|ModuleAdd: FFFFF80271CC0000 - FFFFF80271CDBFFF [xenvbd.sys] xen|ModuleAdd: FFFFF80271CE0000 - FFFFF80271D19FFF [xencrsh.sys] xen|ModuleAdd: FFFFF80271D20000 - FFFFF80271D2DFFF [xendisk.sys] xen|ModuleAdd: FFFFF80271D30000 - FFFFF80271D51FFF [EhStorClass.sys] xen|ModuleAdd: FFFFF80271D60000 - FFFFF80271DA1FFF [Wof.sys] xen|ModuleAdd: FFFFF80271DB0000 - FFFFF80271E19FFF [WdFilter.sys] xen|ModuleAdd: FFFFF80271E20000 - FFFFF80272130FFF [Ntfs.sys] xen|ModuleAdd: FFFFF80272140000 - FFFFF8027214CFFF [Fs_Rec.sys] xen|ModuleAdd: FFFFF80272150000 - FFFFF80272182FFF [ksecpkg.sys] xen|ModuleAdd: FFFFF80272190000 - FFFFF802724AEFFF [tcpip.sys] xen|ModuleAdd: FFFFF802724B0000 - FFFFF80272530FFF [fwpkclnt.sys] xen|ModuleAdd: FFFFF80272540000 - FFFFF8027256FFFF [wfplwfs.sys] xen|ModuleAdd: FFFFF80272580000 - FFFFF8027258AFFF [volume.sys] xen|ModuleAdd: FFFFF80272590000 - FFFFF80272603FFF [volsnap.sys] xen|ModuleAdd: FFFFF80272610000 - FFFFF80272635FFF [mup.sys] xen|ModuleAdd: FFFFF80272640000 - FFFFF8027264FFFF [hwpolicy.sys] xen|ModuleAdd: FFFFF80272660000 - FFFFF8027267EFFF [disk.sys] xen|ModuleAdd: FFFFF80272680000 - FFFFF802726F4FFF [CLASSPNP.SYS] xen|UnplugSetRequest: DISKS (0) xen|UnplugSetRequest: NICS (0) xenbus|DriverEntry: 9.1.9 (105) (10.09.2024) xen|LogReadLogLevel: fail1 (c0000034) xen|ConfigSetActive: PCI\VEN_5853&DEV_0002&SUBSYS_00015853&REV_01\18: \Registry\Machine\System\CurrentControlSet\Services\pci,65536,0,3,0 xenbus|FdoCreate: FFFF9A05CD4AB550 (XS0002 XENBUS) [ACTIVE] xen|FiltersInstallClass: DEVCLASS_SYSTEM XENFILT xen|FiltersInstallClass: DEVCLASS_HDC XENFILT xenbus|FdoConnectInterrupt: FFFF9A05CD90E6E0: Shared LevelSensitive CPU 0:0 VECTOR a1 xenbus|FdoConnectInterrupt: FFFF9A05CD4AE6E0: DeviceExclusive Latched CPU 0:0 VECTOR b1 xenbus|FdoConnectInterrupt: FFFF9A05CD4AD6E0: DeviceExclusive Latched CPU 0:1 VECTOR b1 xenbus|FdoScan: ====> xenbus|FdoSuspend: ====> xenbus|FdoBalloon: ====> xenbus|FdoPciHoleCreate: 000f0000 - 000f0fff xenbus|EvtchnAbiAcquire: FIFO xenbus|EvtchnInterruptEnable: CPU 0:0 (Vector = 177) xenbus|EvtchnInterruptEnable: CPU 0:1 (Vector = 177) xenbus|EvtchnInterruptEnable: CALLBACK VIA (Vector = 28) xenbus|GnttabExpand: added references [00000020 - 000001ff] xenbus|EvtchnFifoExpand: added ports [00000000 - 000003ff] xenbus|__FdoVirqCreate: DEBUG: CPU 0:0 xenbus|PdoCreate: FFFF9A05CD8DB530 (VBD) xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2 xenbus|PdoCreate: FFFF9A05CD8DA530 (VIF) xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2 xenbus|PdoCreate: FFFF9A05CD8D94B0 (IFACE) xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2 xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2 xenfilt|DriverEntry: 9.1.9 (105) (10.09.2024) xenfilt|DriverAddDevice: FFFF9A05CD8E2360 UNKNOWN xenfilt|DriverGetEmulatedType: MATCH: Internal_IDE_Channel -> IDE xenfilt|DriverAddDevice: FFFF9A05CD8DE270 IDE xenfilt|FdoCreate: FFFF9A05CD5DDDA0 (PCIIDE\IDEChannel\0) xenfilt|DriverGetEmulatedType: MATCH: Internal_IDE_Channel -> IDE xenfilt|DriverAddDevice: FFFF9A05CD8DE5A0 IDE xenfilt|FdoCreate: FFFF9A05CD939DA0 (PCIIDE\IDEChannel\1) xenfilt|PdoCreate: FFFF9A05CD97A750 (IDE\CdRomQEMU_QEMU_DVD-ROM_______________________2.5+____\1.1.0)Could you build a new template VM without any prebaked drivers to see if it's a driver or group policy issue?
I'm in the process of building a new template now using a vanilla ISO of Windows Server 2022. So far the VM is running fine; no BSOD after multiple reboots. I'll provide an update when patching is completed and I've turned the new VM to a template and built a VM from that.