VM Failing to Reboot

kagbasi-ngc

@dinhngtu Just to clarify, the VM isn't booting into Safe Mode; I have to trigger it by smashing the F8 key at boot. It boots normally then goes to the BSOD.

I will get the logs for you shortly. Do you want me to drop them in the same location you sent earlier?

dinhngtu

@kagbasi-ngc Just to confirm, if you use the F8 menu it boots into Safe Mode without getting a BSOD, right? Please upload the SYSTEM hive to the same location.

kagbasi-ngc

@dinhngtu Yes, it does. The only time I get the BSOD is if I allow the VM to boot normally without interfering.

kagbasi-ngc

@dinhngtu So I managed to enable the boot logging, allowed the VM to do a normally boot to BSOD, then I booted with Hiren's, however, I'm not seeing the log file at C:\Windows.

dinhngtu

@kagbasi-ngc You might need the debugger in normal mode. Attach the debugger right at boot time and run the following command (beware the exact spelling):

sxe -c "lm1mna (poi(rdx));g" ld

Click Go until Windows loads completely or until you get a VM crash in Windbg, then paste the entire Windbg output.

kagbasi-ngc

@dinhngtu sorry for the delayed response, having trouble getting the debugger to reattach. I've re-input all the boot parameters, yet still, no data is being piped to the debug port on the host.

Do you think perhaps the removal of the drivers we did yesterday has removed the VM's ability to talk to the host?

dinhngtu

@kagbasi-ngc It shouldn't, the debugger drivers are built into Windows. If you're having issues with attaching the debugger, you can get into the F8 menu, start attaching WinDbg then choose Debugging mode in the F8 menu to start the guest. This should give WinDbg the correct timing to attach to the guest.

kagbasi-ngc

@dinhngtu thanks for the pointers, but nothing I'm doing seems to be working. The debugger seems to have connected to the host successful, but the VM isn't transmitting any data to the debugport.

dinhngtu

@kagbasi-ngc Does it get stuck at "Waiting to reconnect..."? Do you get anything when telnet-ing to the VM's serial port?

kagbasi-ngc

@dinhngtu Yes (see image below). I'm on my way back to the office now, should be there in about 45 mins and will try telnet to the host tcp port 7001 and see what I get.

kagbasi-ngc

@dinhngtu said in VM Failing to Reboot:

Do you get anything when telnet-ing to the VM's serial port?

Sorry for the delayed response. I just attempted to telnet to the VM's serial port on the host, while watching IPTables, and here's the behavior I observed:

The PuTTY telnet session remains open while the VM is powered up and attempting to boot.
As soon as the BSOD is encountered and the VM powers off, the telnet session window terminates.
While watching IPTables, I can see the pkts count increment by 5 each time I attempt a connection.

Given the above observations, I'm convinced that the host is setup correctly, but it's the VM that is not dumping any data to the serial console on the host.

This is the IPTables rule I was watching:

Chain	xapi-INPUT (1 references)
 pkts	bytes	target		prot	opt	in	out	source		destination
   70	3636	ACCEPT		tcp	--	*	*	0.0.0.0/0	0.0.0.0/0	ctstate NEW tcp dpt:7001

dinhngtu

@kagbasi-ngc Could you check bcdedit /store bcd /enum all (you can do this from Safe Mode, just do bcdedit /enum all) to see if the debugger settings are still there? For reference, it should look like:

Windows Boot Loader
-------------------
identifier              {current}
...
debug                   Yes

...

Debugger Settings
-----------------
identifier              {dbgsettings}
debugtype               Serial
debugport               1
baudrate                115200

kagbasi-ngc

@dinhngtu Checking now.

As soon as I selected Safe Mode with Command Prompt, the following came up. So I'm waiting for it to finish.

kagbasi-ngc

@dinhngtu said in VM Failing to Reboot:

@kagbasi-ngc Could you check bcdedit /store bcd /enum all (you can do this from Safe Mode, just do bcdedit /enum all) to see if the debugger settings are still there? For reference, it should look like:

Here you go. As far as I can tell, the settings are there.

Firmware Boot Manager
---------------------
identifier              {fwbootmgr}
displayorder            {869b8842-cfa5-11ef-88bd-6690debbc340}
                        {bootmgr}
                        {4953fce7-d2e8-11ef-9050-806e6f6e6963}
                        {68f8db89-dac7-11ef-b603-806e6f6e6963}
                        {869b8841-cfa5-11ef-88bd-6690debbc340}
                        {869b8846-cfa5-11ef-88bd-6690debbc340}
                        {cc338294-d2fd-11ef-904b-806e6f6e6963}
                        {869b8844-cfa5-11ef-88bd-6690debbc340}
timeout                 0

Windows Boot Manager
--------------------
identifier              {bootmgr}
device                  partition=S:
path                    \EFI\Microsoft\Boot\bootmgfw.efi
description             Windows Boot Manager
locale                  en-US
inherit                 {globalsettings}
bootshutdowndisabled    Yes
default                 {default}
resumeobject            {869b8847-cfa5-11ef-88bd-6690debbc340}
displayorder            {default}
toolsdisplayorder       {memdiag}
timeout                 30

Firmware Application (101fffff)
-------------------------------
identifier              {4953fce7-d2e8-11ef-9050-806e6f6e6963}
description             UEFI Misc Device 2

Firmware Application (101fffff)
-------------------------------
identifier              {68f8db89-dac7-11ef-b603-806e6f6e6963}
description             UEFI Misc Device 3

Firmware Application (101fffff)
-------------------------------
identifier              {869b8841-cfa5-11ef-88bd-6690debbc340}
description             UiApp

Firmware Application (101fffff)
-------------------------------
identifier              {869b8842-cfa5-11ef-88bd-6690debbc340}
description             UEFI Misc Device

Firmware Application (101fffff)
-------------------------------
identifier              {869b8844-cfa5-11ef-88bd-6690debbc340}
description             UEFI PXEv6 (MAC:7E30B1BB2307)

Firmware Application (101fffff)
-------------------------------
identifier              {869b8846-cfa5-11ef-88bd-6690debbc340}
description             EFI Internal Shell

Firmware Application (101fffff)
-------------------------------
identifier              {cc338294-d2fd-11ef-904b-806e6f6e6963}
description             UEFI PXEv4 (MAC:7E30B1BB2307)

Windows Boot Loader
-------------------
identifier              {default}
device                  partition=C:
path                    \windows\system32\winload.efi
description             Windows Server
locale                  en-US
inherit                 {bootloadersettings}
recoverysequence        {ad69be4c-cf8c-11ef-9047-6690debbc340}
displaymessageoverride  Recovery
recoveryenabled         Yes
isolatedcontext         Yes
allowedinmemorysettings 0x15000075
osdevice                partition=C:
systemroot              \windows
resumeobject            {869b8847-cfa5-11ef-88bd-6690debbc340}
nx                      OptOut
bootlog                 Yes

Windows Boot Loader
-------------------
identifier              {ad69be4c-cf8c-11ef-9047-6690debbc340}
device                  ramdisk=[\Device\HarddiskVolume4]\Recovery\WindowsRE\Winre.wim,{ad69be4d-cf8c-11ef-9047-6690debbc340}
path                    \windows\system32\winload.efi
description             Windows Recovery Environment
locale                  en-US
inherit                 {bootloadersettings}
displaymessage          Recovery
osdevice                ramdisk=[\Device\HarddiskVolume4]\Recovery\WindowsRE\Winre.wim,{ad69be4d-cf8c-11ef-9047-6690debbc340}
systemroot              \windows
nx                      OptIn
bootmenupolicy          Standard
winpe                   Yes

Resume from Hibernate
---------------------
identifier              {869b8847-cfa5-11ef-88bd-6690debbc340}
device                  partition=C:
path                    \windows\system32\winresume.efi
description             Windows Resume Application
locale                  en-US
inherit                 {resumeloadersettings}
recoverysequence        {ad69be4c-cf8c-11ef-9047-6690debbc340}
recoveryenabled         Yes
isolatedcontext         Yes
allowedinmemorysettings 0x15000075
filedevice              partition=C:
custom:21000026         partition=C:
filepath                \hiberfil.sys
debugoptionenabled      No

Windows Memory Tester
---------------------
identifier              {memdiag}
device                  partition=S:
path                    \EFI\Microsoft\Boot\memtest.efi
description             Windows Memory Diagnostic
locale                  en-US
inherit                 {globalsettings}
badmemoryaccess         Yes

EMS Settings
------------
identifier              {emssettings}
bootems                 Yes

Debugger Settings
-----------------
identifier              {dbgsettings}
debugtype               Serial
debugport               1
baudrate                115200

RAM Defects
-----------
identifier              {badmemory}

Global Settings
---------------
identifier              {globalsettings}
inherit                 {dbgsettings}
                        {emssettings}
                        {badmemory}

Boot Loader Settings
--------------------
identifier              {bootloadersettings}
inherit                 {globalsettings}
                        {hypervisorsettings}

Hypervisor Settings
-------------------
identifier              {hypervisorsettings}
hypervisordebugtype     Serial
hypervisordebugport     1
hypervisorbaudrate      115200

Resume Loader Settings
----------------------
identifier              {resumeloadersettings}
inherit                 {globalsettings}

Device options
--------------
identifier              {ad69be4d-cf8c-11ef-9047-6690debbc340}
description             Windows Recovery
ramdisksdidevice        partition=\Device\HarddiskVolume4
ramdisksdipath          \Recovery\WindowsRE\boot.sdi

dinhngtu

@kagbasi-ngc {dbgsettings} are there but {default}/debug is not set to Yes.

kagbasi-ngc

@dinhngtu My apologies for the delayed response. Got busy with several meetings.

So, I finally got the debugger to attach to the VM (after many tries). I was able to capture some logs, but was not able to get any response to the command you asked me to run: sxe -c "lm1mna (poi(rdx));g" ld

One thing I did was to re-install the xen drivers, so you'll see them get loaded in the debug logs.

Another thing to also point out, I cloned the snapshot of this VM to a new VM and observed the following:

The cloned VM from snapshot booted up all the way into Windows, and I was able to login.
I noticed that the Start Menu would not open (after several clicks), even though the Windows Explorer opens. So, I initiated a reboot - this time using the XO restart button.
The VM went down for a reboot and got stuck in the same boot state (i.e., spinning wheel after the Windows splash logo). The VM's NIC comes up, however, because it starts responding to pings.

Anyway, here're the debug logs from the original VM:


************* Preparing the environment for Debugger Extensions Gallery repositories **************
   ExtensionRepository : Implicit
   UseExperimentalFeatureForNugetShare : true
   AllowNugetExeUpdate : true
   NonInteractiveNuget : true
   AllowNugetMSCredentialProviderInstall : true
   AllowParallelInitializationOfLocalRepositories : true
   EnableRedirectToChakraJsProvider : false

   -- Configuring repositories
      ----> Repository : LocalInstalled, Enabled: true
      ----> Repository : UserExtensions, Enabled: true

>>>>>>>>>>>>> Preparing the environment for Debugger Extensions Gallery repositories completed, duration 0.000 seconds

************* Waiting for Debugger Extensions Gallery to Initialize **************

>>>>>>>>>>>>> Waiting for Debugger Extensions Gallery to Initialize completed, duration 0.015 seconds
   ----> Repository : UserExtensions, Enabled: true, Packages count: 0
   ----> Repository : LocalInstalled, Enabled: true, Packages count: 42

Microsoft (R) Windows Debugger Version 10.0.27725.1000 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Opened 10.0.10.12
Waiting to reconnect...
Connected to Windows 10 20348 x64 target at (Tue Jan 28 20:04:11.011 2025 (UTC - 5:00)), ptr64 TRUE
Kernel Debugger connection established.
Symbol search path is: srv*
Executable search path is: 
Windows 10 Kernel Version 20348 MP (1 procs) Free x64
Edition build lab: 20348.859.amd64fre.fe_release_svc_prod2.220707-1832
Kernel base = 0xfffff803`1be00000 PsLoadedModuleList = 0xfffff803`1ca33d20
System Uptime: 0 days 0:00:00.000
Unable to load image ntkrnlmp.exe, Win32 error 0n2
xen|LogReadLogLevel: fail1 (c0000034)
xen|LogReadLogLevel: fail1 (c0000034)
xen|DllInitialize: 9.1.9 (105) (10.09.2024)
xen|AcpiFindRsdp: 0x00000000000EA020
xen|SystemInitialize: CPUs 2 / 4
xen|SystemGetStartOptions:  NOEXECUTE=OPTOUT  BOOTLOG  DEBUGPORT=COM1  BAUDRATE=115200  FVEBOOT=2670592  NOVGA  DEBUG
xen|SystemGetVersionInformation: KERNEL: 10.0 (BUILD 20348) PLATFORM WIN32_NT (x64)
xen|SystemGetVersionInformation: SUITES:
xen|SystemGetVersionInformation: - TERMINAL
xen|SystemGetVersionInformation: - SINGLEUSERTS
xen|SystemGetVersionInformation: TYPE: SERVER
xen|SystemGetMemoryInformation: RANGE[0] 00000000.00001000 - 00000000.0009ffff
xen|SystemGetMemoryInformation: RANGE[1] 00000000.00100000 - 00000000.ee4fbfff
xen|SystemGetMemoryInformation: RANGE[2] 00000000.ee4fd000 - 00000000.ee510fff
xen|SystemGetMemoryInformation: RANGE[3] 00000000.ee51b000 - 00000000.ef59afff
xen|SystemGetMemoryInformation: RANGE[4] 00000000.ef5ff000 - 00000000.effdefff
xen|SystemGetMemoryInformation: RANGE[5] 00000000.effff000 - 00000000.efffffff
xen|SystemGetMemoryInformation: RANGE[6] 00000001.00000000 - 00000004.0f7fffff
xen|SystemGetMemoryInformation: MaximumPhysicalAddress = 00000004.0f7fffff
xen|AcpiGetXsdt: 0x00000000FC00A5E0
xen|SystemProcessorDpc: ====> (0:0)
xen|SystemViridianInformation: ====>
xen|SystemViridianInformation: Interface Identifier: Hv#1
xen|SystemViridianInformation: Hypervisor Features:
xen|SystemViridianInformation:  - Partition Reference Counter
xen|SystemViridianInformation:  - Basic SynIC MSRs
xen|SystemViridianInformation:  - Synthetic Timer MSRs
xen|SystemViridianInformation:  - APIC Access MSRs
xen|SystemViridianInformation:  - Hypercall MSRs
xen|SystemViridianInformation:  - Virtual Processor Index MSR
xen|SystemViridianInformation:  - Partition Reference TSC MSR
xen|SystemViridianInformation:  - Timer Frequency MSR
xen|SystemViridianInformation: Recommendations:
xen|SystemViridianInformation:  - EOI, ICR and TPR access via MSR
xen|SystemViridianInformation:  - Use relaxed timing
xen|SystemViridianInformation:  - Retry spinlocks 2047 times
xen|SystemViridianInformation: Hardware Features:
xen|SystemViridianInformation:  - APIC overlay assist
xen|SystemViridianInformation:  - MSR bitmaps
xen|SystemViridianInformation:  - Second Level Address Translation (SLAT)
xen|SystemViridianInformation: <====
xen|SystemProcessorInitialize: Manufacturer: GenuineIntel
xen|SystemProcessorInitialize: APIC ID: 00
xen|SystemProcessorInitialize: PROCESSOR ID: 00
xen|SystemProcessorDpc: <==== (0:0)
xen|SystemProcessorDpc: ====> (0:1)
xen|SystemProcessorInitialize: Manufacturer: GenuineIntel
xen|SystemProcessorInitialize: APIC ID: 02
xen|SystemProcessorInitialize: PROCESSOR ID: 01
xen|SystemProcessorDpc: <==== (0:1)
xen|SystemGetTimeInformation: FALSE
xen|ModuleAdd: FFFFF8031BE00000 - FFFFF8031CE46FFF [ntoskrnl.exe]
xen|ModuleAdd: FFFFF80319DA0000 - FFFFF80319DA5FFF [hal.dll]
xen|ModuleAdd: FFFFF80319DB0000 - FFFFF80319DBDFFF [kdcom.dll]
xen|ModuleAdd: FFFFF803199F0000 - FFFFF80319D73FFF [mcupdate_GenuineIntel.dll]
xen|ModuleAdd: FFFFF8031F200000 - FFFFF8031F26CFFF [CLFS.SYS]
xen|ModuleAdd: FFFFF80319DC0000 - FFFFF80319DE7FFF [tm.sys]
xen|ModuleAdd: FFFFF8031F270000 - FFFFF8031F289FFF [PSHED.dll]
xen|ModuleAdd: FFFFF80319DF0000 - FFFFF80319DFAFFF [BOOTVID.dll]
xen|ModuleAdd: FFFFF8031F3B0000 - FFFFF8031F420FFF [FLTMGR.SYS]
xen|ModuleAdd: FFFFF8031F460000 - FFFFF8031F4C1FFF [msrpc.sys]
xen|ModuleAdd: FFFFF8031F430000 - FFFFF8031F458FFF [ksecdd.sys]
xen|ModuleAdd: FFFFF8031F290000 - FFFFF8031F3A2FFF [clipsp.sys]
xen|ModuleAdd: FFFFF8031F4D0000 - FFFFF8031F4DDFFF [cmimcext.sys]
xen|ModuleAdd: FFFFF8031F4E0000 - FFFFF8031F4F0FFF [werkernel.sys]
xen|ModuleAdd: FFFFF8031F500000 - FFFFF8031F50BFFF [ntosext.sys]
xen|ModuleAdd: FFFFF8031F510000 - FFFFF8031F5F4FFF [CI.dll]
xen|ModuleAdd: FFFFF8031F600000 - FFFFF8031F6BAFFF [cng.sys]
xen|ModuleAdd: FFFFF8031F6C0000 - FFFFF8031F79CFFF [Wdf01000.sys]
xen|ModuleAdd: FFFFF8031F7A0000 - FFFFF8031F7B3FFF [WDFLDR.SYS]
xen|ModuleAdd: FFFFF8031F7C0000 - FFFFF8031F7CCFFF [PRM.sys]
xen|ModuleAdd: FFFFF8031F7D0000 - FFFFF8031F7F5FFF [acpiex.sys]
xen|ModuleAdd: FFFFF8031F800000 - FFFFF8031F810FFF [WppRecorder.sys]
xen|ModuleAdd: FFFFF8031F820000 - FFFFF8031F82DFFF [msseccore.sys]
xen|ModuleAdd: FFFFF8031F830000 - FFFFF8031F84AFFF [SgrmAgent.sys]
xen|ModuleAdd: FFFFF8031F850000 - FFFFF8031F91AFFF [ACPI.sys]
xen|ModuleAdd: FFFFF8031F920000 - FFFFF8031F92BFFF [WMILIB.SYS]
xen|ModuleAdd: FFFFF8031F930000 - FFFFF8031F940FFF [WdBoot.sys]
xen|ModuleAdd: FFFFF8031F950000 - FFFFF8031F966FFF [WindowsTrustedRT.sys]
xen|ModuleAdd: FFFFF8031F970000 - FFFFF8031F9DAFFF [intelpep.sys]
xen|ModuleAdd: FFFFF8031F9E0000 - FFFFF8031F9EAFFF [WindowsTrustedRTProxy.sys]
xen|ModuleAdd: FFFFF8031F9F0000 - FFFFF8031F9FAFFF [IntelPMT.sys]
xen|ModuleAdd: FFFFF8031FA00000 - FFFFF8031FA14FFF [pcw.sys]
xen|ModuleAdd: FFFFF8031FA20000 - FFFFF8031FA3DFFF [sacdrv.sys]
xen|ModuleAdd: FFFFF8031FAE0000 - FFFFF8031FC5BFFF [NDIS.SYS]
xen|ModuleAdd: FFFFF8031FA40000 - FFFFF8031FADDFFF [NETIO.SYS]
xen|ModuleAdd: FFFFF8031FC60000 - FFFFF8031FC6AFFF [msisadrv.sys]
xen|ModuleAdd: FFFFF8031FC70000 - FFFFF8031FC85FFF [vdrvroot.sys]
xen|ModuleAdd: FFFFF8031FC90000 - FFFFF8031FD13FFF [pci.sys]
xen|ModuleAdd: FFFFF8031FD20000 - FFFFF8031FD50FFF [xenbus.sys]
xen|ModuleAdd: FFFFF8031FD60000 - FFFFF8031FD80FFF [xen.sys]
xen|ModuleAdd: FFFFF8031FD90000 - FFFFF8031FDA0FFF [xenfilt.sys]
xen|ModuleAdd: FFFFF8031FDB0000 - FFFFF8031FDDEFFF [pdc.sys]
xen|ModuleAdd: FFFFF8031FDE0000 - FFFFF8031FDF7FFF [CEA.sys]
xen|ModuleAdd: FFFFF8031FE00000 - FFFFF8031FE30FFF [partmgr.sys]
xen|ModuleAdd: FFFFF8031FE40000 - FFFFF8031FF0BFFF [spaceport.sys]
xen|ModuleAdd: FFFFF8031FF10000 - FFFFF8031FF29FFF [volmgr.sys]
xen|ModuleAdd: FFFFF8031FF30000 - FFFFF8031FF92FFF [volmgrx.sys]
xen|ModuleAdd: FFFFF8031FFA0000 - FFFFF8031FFAAFFF [intelide.sys]
xen|ModuleAdd: FFFFF8031FFB0000 - FFFFF8031FFC2FFF [PCIIDEX.SYS]
xen|ModuleAdd: FFFFF8031FFD0000 - FFFFF8031FFEDFFF [mountmgr.sys]
xen|ModuleAdd: FFFFF8031FFF0000 - FFFFF8031FFFCFFF [atapi.sys]
xen|ModuleAdd: FFFFF80320000000 - FFFFF8032003BFFF [ataport.SYS]
xen|ModuleAdd: FFFFF80320040000 - FFFFF80320075FFF [stornvme.sys]
xen|ModuleAdd: FFFFF80320080000 - FFFFF8032014AFFF [storport.sys]
xen|ModuleAdd: FFFFF80320150000 - FFFFF8032016BFFF [xenvbd.sys]
xen|ModuleAdd: FFFFF80320170000 - FFFFF803201A9FFF [xencrsh.sys]
xen|ModuleAdd: FFFFF803201B0000 - FFFFF803201BDFFF [xendisk.sys]
xen|ModuleAdd: FFFFF803201C0000 - FFFFF803201E1FFF [EhStorClass.sys]
xen|ModuleAdd: FFFFF803201F0000 - FFFFF80320231FFF [Wof.sys]
xen|ModuleAdd: FFFFF80320240000 - FFFFF803202A9FFF [WdFilter.sys]
xen|ModuleAdd: FFFFF803202B0000 - FFFFF803205C0FFF [Ntfs.sys]
xen|ModuleAdd: FFFFF803205D0000 - FFFFF803205DCFFF [Fs_Rec.sys]
xen|ModuleAdd: FFFFF803205E0000 - FFFFF80320612FFF [ksecpkg.sys]
xen|ModuleAdd: FFFFF80320620000 - FFFFF8032093EFFF [tcpip.sys]
xen|ModuleAdd: FFFFF80320940000 - FFFFF803209C0FFF [fwpkclnt.sys]
xen|ModuleAdd: FFFFF803209D0000 - FFFFF803209FFFFF [wfplwfs.sys]
xen|ModuleAdd: FFFFF80320A10000 - FFFFF80320A1AFFF [volume.sys]
xen|ModuleAdd: FFFFF80320A20000 - FFFFF80320A93FFF [volsnap.sys]
xen|ModuleAdd: FFFFF80320AA0000 - FFFFF80320AC5FFF [mup.sys]
xen|ModuleAdd: FFFFF80320AD0000 - FFFFF80320ADFFFF [hwpolicy.sys]
xen|ModuleAdd: FFFFF80320AF0000 - FFFFF80320B0EFFF [disk.sys]
xen|ModuleAdd: FFFFF80320B10000 - FFFFF80320B84FFF [CLASSPNP.SYS]
xen|UnplugSetRequest: DISKS (0)
xen|UnplugSetRequest: NICS (0)
xenbus|DriverEntry: 9.1.9 (105) (10.09.2024)
xen|LogReadLogLevel: fail1 (c0000034)
xen|ConfigSetActive: PCI\VEN_5853&DEV_0002&SUBSYS_00015853&REV_01\18: \Registry\Machine\System\CurrentControlSet\Services\pci,65536,0,3,0
xenbus|FdoCreate: FFFFB889490CBC00 (XS0002 XENBUS) [ACTIVE]
xen|FiltersInstallClass: DEVCLASS_SYSTEM XENFILT
xen|FiltersInstallClass: DEVCLASS_HDC XENFILT
xenbus|FdoConnectInterrupt: FFFFB889490D5910: Shared LevelSensitive CPU 0:0 VECTOR a1
xenbus|FdoConnectInterrupt: FFFFB889490D5B30: DeviceExclusive Latched CPU 0:0 VECTOR b1
xenbus|FdoConnectInterrupt: FFFFB889490D5D50: DeviceExclusive Latched CPU 0:1 VECTOR b1
xenbus|FdoScan: ====>
xenbus|FdoSuspend: ====>
xenbus|FdoBalloon: ====>
xenbus|FdoPciHoleCreate: 000f0000 - 000f0fff
xenbus|EvtchnAbiAcquire: FIFO
xenbus|EvtchnInterruptEnable: CPU 0:0 (Vector = 177)
xenbus|EvtchnInterruptEnable: CPU 0:1 (Vector = 177)
xenbus|EvtchnInterruptEnable: CALLBACK VIA (Vector = 28)
xenbus|GnttabExpand: added references [00000020 - 000001ff]
xenbus|EvtchnFifoExpand: added ports [00000000 - 000003ff]
xenbus|__FdoVirqCreate: DEBUG: CPU 0:0
xenbus|PdoCreate: FFFFB88948C7B540 (VBD)
xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2
xenbus|PdoCreate: FFFFB88948D7F540 (VIF)
xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2
xenbus|PdoCreate: FFFFB88948D7F870 (IFACE)
xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2
xenfilt|DriverEntry: 9.1.9 (105) (10.09.2024)
xenfilt|DriverAddDevice: FFFFB8894910B360 UNKNOWN
xenfilt|DriverGetEmulatedType: MATCH: Internal_IDE_Channel -> IDE
xenfilt|DriverAddDevice: FFFFB8894916BAB0 IDE
xenfilt|FdoCreate: FFFFB88949170DA0 (PCIIDE\IDEChannel\0)
xenfilt|DriverGetEmulatedType: MATCH: Internal_IDE_Channel -> IDE
xenfilt|DriverAddDevice: FFFFB8894916C060 IDE
xenfilt|FdoCreate: FFFFB88949176DA0 (PCIIDE\IDEChannel\1)
xenfilt|PdoCreate: FFFFB889490E2510 (IDE\CdRomQEMU_QEMU_DVD-ROM_______________________2.5+____\1.1.0) 
Break instruction exception - code 80000003 (first chance)
*******************************************************************************
*                                                                             *
*   You are seeing this message because you pressed either                    *
*       CTRL+C (if you run console kernel debugger) or,                       *
*       CTRL+BREAK (if you run GUI kernel debugger),                          *
*   on your debugger machine's keyboard.                                      *
*                                                                             *
*                   THIS IS NOT A BUG OR A SYSTEM CRASH                       *
*                                                                             *
* If you did not intend to break into the debugger, press the "g" key, then   *
* press the "Enter" key now.  This message might immediately reappear.  If it *
* does, press "g" and "Enter" again.                                          *
*                                                                             *
*******************************************************************************
nt!DbgBreakPointWithStatus:
fffff803`1c229560 cc              int     3
0: kd> sxe -c "lm1mna (poi(rdx));g" ld
0: kd> g

dinhngtu

@kagbasi-ngc It seems like the debugger was attached a little late, after the Xen driver was loaded. Could you try attaching Windbg at the F8 menu instead?

Another thing to also point out, I cloned the snapshot of this VM to a new VM and observed the following:

The cloned VM from snapshot booted up all the way into Windows, and I was able to login.

I noticed that the Start Menu would not open (after several clicks), even though the Windows Explorer opens. So, I initiated a reboot - this time using the XO restart button.

The VM went down for a reboot and got stuck in the same boot state (i.e., spinning wheel after the Windows splash logo). The VM's NIC comes up, however, because it starts responding to pings.

This tells me perhaps something is wrong with your template VM itself. Could you build a new template VM without any prebaked drivers to see if it's a driver or group policy issue?

kagbasi-ngc

@dinhngtu I can certainly do that. I will be back in the lab in about 2 hours and will retry.

Concerning the template, hmmm....I was having the same thoughts, so I've pulled down a Windows Server 2022 ISO directly from Microsoft and I'm gonna build a new template with it, to see if the problem resurfaces. It's possible there's something in the Secure Host Baseline that is causing problems with this platform (not sure if it's XCP-ng, or Xen). However, if that ends up being the case, it would be a bummer as that would weaken my case for adoption of the Vates VMS.

In any case, I'll report back in a couple of hours.

kagbasi-ngc

@dinhngtu said in VM Failing to Reboot:

@kagbasi-ngc It seems like the debugger was attached a little late, after the Xen driver was loaded. Could you try attaching Windbg at the F8 menu instead?

As requested, I managed to attach Windbg at the F8 menu. Here's the output:


************* Preparing the environment for Debugger Extensions Gallery repositories **************
   ExtensionRepository : Implicit
   UseExperimentalFeatureForNugetShare : true
   AllowNugetExeUpdate : true
   NonInteractiveNuget : true
   AllowNugetMSCredentialProviderInstall : true
   AllowParallelInitializationOfLocalRepositories : true
   EnableRedirectToChakraJsProvider : false

   -- Configuring repositories
      ----> Repository : LocalInstalled, Enabled: true
      ----> Repository : UserExtensions, Enabled: true

>>>>>>>>>>>>> Preparing the environment for Debugger Extensions Gallery repositories completed, duration 0.000 seconds

************* Waiting for Debugger Extensions Gallery to Initialize **************

>>>>>>>>>>>>> Waiting for Debugger Extensions Gallery to Initialize completed, duration 0.032 seconds
   ----> Repository : UserExtensions, Enabled: true, Packages count: 0
   ----> Repository : LocalInstalled, Enabled: true, Packages count: 42

Microsoft (R) Windows Debugger Version 10.0.27725.1000 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Opened 10.0.10.12
Waiting to reconnect...
Connected to Windows 10 20348 x64 target at (Wed Jan 29 20:06:47.664 2025 (UTC - 5:00)), ptr64 TRUE
Kernel Debugger connection established.
Symbol search path is: srv*
Executable search path is: 
Windows 10 Kernel Version 20348 MP (1 procs) Free x64
Edition build lab: 20348.859.amd64fre.fe_release_svc_prod2.220707-1832
Kernel base = 0xfffff802`6c600000 PsLoadedModuleList = 0xfffff802`6d233d20
System Uptime: 0 days 0:00:00.000
Unable to load image ntkrnlmp.exe, Win32 error 0n2
xen|LogReadLogLevel: fail1 (c0000034)
xen|LogReadLogLevel: fail1 (c0000034)
xen|DllInitialize: 9.1.9 (105) (10.09.2024)
xen|AcpiFindRsdp: 0x00000000000EA020
xen|SystemInitialize: CPUs 2 / 4
xen|SystemGetStartOptions:  NOEXECUTE=OPTOUT  BOOTLOG  DEBUGPORT=COM1  BAUDRATE=115200  FVEBOOT=2670592  NOVGA  DEBUG
xen|SystemGetVersionInformation: KERNEL: 10.0 (BUILD 20348) PLATFORM WIN32_NT (x64)
xen|SystemGetVersionInformation: SUITES:
xen|SystemGetVersionInformation: - TERMINAL
xen|SystemGetVersionInformation: - SINGLEUSERTS
xen|SystemGetVersionInformation: TYPE: SERVER
xen|SystemGetMemoryInformation: RANGE[0] 00000000.00001000 - 00000000.0009ffff
xen|SystemGetMemoryInformation: RANGE[1] 00000000.00100000 - 00000000.ee4fbfff
xen|SystemGetMemoryInformation: RANGE[2] 00000000.ee4fd000 - 00000000.ee510fff
xen|SystemGetMemoryInformation: RANGE[3] 00000000.ee51b000 - 00000000.ef59afff
xen|SystemGetMemoryInformation: RANGE[4] 00000000.ef5ff000 - 00000000.effdefff
xen|SystemGetMemoryInformation: RANGE[5] 00000000.effff000 - 00000000.efffffff
xen|SystemGetMemoryInformation: RANGE[6] 00000001.00000000 - 00000004.0f7fffff
xen|SystemGetMemoryInformation: MaximumPhysicalAddress = 00000004.0f7fffff
xen|AcpiGetXsdt: 0x00000000FC00A5E0
xen|SystemProcessorDpc: ====> (0:0)
xen|SystemViridianInformation: ====>
xen|SystemViridianInformation: Interface Identifier: Hv#1
xen|SystemViridianInformation: Hypervisor Features:
xen|SystemViridianInformation:  - Partition Reference Counter
xen|SystemViridianInformation:  - Basic SynIC MSRs
xen|SystemViridianInformation:  - Synthetic Timer MSRs
xen|SystemViridianInformation:  - APIC Access MSRs
xen|SystemViridianInformation:  - Hypercall MSRs
xen|SystemViridianInformation:  - Virtual Processor Index MSR
xen|SystemViridianInformation:  - Partition Reference TSC MSR
xen|SystemViridianInformation:  - Timer Frequency MSR
xen|SystemViridianInformation: Recommendations:
xen|SystemViridianInformation:  - EOI, ICR and TPR access via MSR
xen|SystemViridianInformation:  - Use relaxed timing
xen|SystemViridianInformation:  - Retry spinlocks 2047 times
xen|SystemViridianInformation: Hardware Features:
xen|SystemViridianInformation:  - APIC overlay assist
xen|SystemViridianInformation:  - MSR bitmaps
xen|SystemViridianInformation:  - Second Level Address Translation (SLAT)
xen|SystemViridianInformation: <====
xen|SystemProcessorInitialize: Manufacturer: GenuineIntel
xen|SystemProcessorInitialize: APIC ID: 00
xen|SystemProcessorInitialize: PROCESSOR ID: 00
xen|SystemProcessorDpc: <==== (0:0)
xen|SystemProcessorDpc: ====> (0:1)
xen|SystemProcessorInitialize: Manufacturer: GenuineIntel
xen|SystemProcessorInitialize: APIC ID: 02
xen|SystemProcessorInitialize: PROCESSOR ID: 01
xen|SystemProcessorDpc: <==== (0:1)
xen|SystemGetTimeInformation: FALSE
xen|ModuleAdd: FFFFF8026C600000 - FFFFF8026D646FFF [ntoskrnl.exe]
xen|ModuleAdd: FFFFF8026B910000 - FFFFF8026B915FFF [hal.dll]
xen|ModuleAdd: FFFFF8026B920000 - FFFFF8026B92DFFF [kdcom.dll]
xen|ModuleAdd: FFFFF8026B560000 - FFFFF8026B8E3FFF [mcupdate_GenuineIntel.dll]
xen|ModuleAdd: FFFFF8026B960000 - FFFFF8026B9CCFFF [CLFS.SYS]
xen|ModuleAdd: FFFFF8026B930000 - FFFFF8026B957FFF [tm.sys]
xen|ModuleAdd: FFFFF8026B9D0000 - FFFFF8026B9E9FFF [PSHED.dll]
xen|ModuleAdd: FFFFF8026B9F0000 - FFFFF8026B9FAFFF [BOOTVID.dll]
xen|ModuleAdd: FFFFF80270F20000 - FFFFF80270F90FFF [FLTMGR.SYS]
xen|ModuleAdd: FFFFF80270FD0000 - FFFFF80271031FFF [msrpc.sys]
xen|ModuleAdd: FFFFF80270FA0000 - FFFFF80270FC8FFF [ksecdd.sys]
xen|ModuleAdd: FFFFF80270E00000 - FFFFF80270F12FFF [clipsp.sys]
xen|ModuleAdd: FFFFF80271040000 - FFFFF8027104DFFF [cmimcext.sys]
xen|ModuleAdd: FFFFF80271050000 - FFFFF80271060FFF [werkernel.sys]
xen|ModuleAdd: FFFFF80271070000 - FFFFF8027107BFFF [ntosext.sys]
xen|ModuleAdd: FFFFF80271080000 - FFFFF80271164FFF [CI.dll]
xen|ModuleAdd: FFFFF80271170000 - FFFFF8027122AFFF [cng.sys]
xen|ModuleAdd: FFFFF80271230000 - FFFFF8027130CFFF [Wdf01000.sys]
xen|ModuleAdd: FFFFF80271310000 - FFFFF80271323FFF [WDFLDR.SYS]
xen|ModuleAdd: FFFFF80271330000 - FFFFF8027133CFFF [PRM.sys]
xen|ModuleAdd: FFFFF80271340000 - FFFFF80271365FFF [acpiex.sys]
xen|ModuleAdd: FFFFF80271370000 - FFFFF80271380FFF [WppRecorder.sys]
xen|ModuleAdd: FFFFF80271390000 - FFFFF8027139DFFF [msseccore.sys]
xen|ModuleAdd: FFFFF802713A0000 - FFFFF802713BAFFF [SgrmAgent.sys]
xen|ModuleAdd: FFFFF802713C0000 - FFFFF8027148AFFF [ACPI.sys]
xen|ModuleAdd: FFFFF80271490000 - FFFFF8027149BFFF [WMILIB.SYS]
xen|ModuleAdd: FFFFF802714A0000 - FFFFF802714B0FFF [WdBoot.sys]
xen|ModuleAdd: FFFFF802714C0000 - FFFFF802714D6FFF [WindowsTrustedRT.sys]
xen|ModuleAdd: FFFFF802714E0000 - FFFFF8027154AFFF [intelpep.sys]
xen|ModuleAdd: FFFFF80271550000 - FFFFF8027155AFFF [WindowsTrustedRTProxy.sys]
xen|ModuleAdd: FFFFF80271560000 - FFFFF8027156AFFF [IntelPMT.sys]
xen|ModuleAdd: FFFFF80271570000 - FFFFF80271584FFF [pcw.sys]
xen|ModuleAdd: FFFFF80271590000 - FFFFF802715ADFFF [sacdrv.sys]
xen|ModuleAdd: FFFFF80271650000 - FFFFF802717CBFFF [NDIS.SYS]
xen|ModuleAdd: FFFFF802715B0000 - FFFFF8027164DFFF [NETIO.SYS]
xen|ModuleAdd: FFFFF802717D0000 - FFFFF802717DAFFF [msisadrv.sys]
xen|ModuleAdd: FFFFF802717E0000 - FFFFF802717F5FFF [vdrvroot.sys]
xen|ModuleAdd: FFFFF80271800000 - FFFFF80271883FFF [pci.sys]
xen|ModuleAdd: FFFFF80271890000 - FFFFF802718C0FFF [xenbus.sys]
xen|ModuleAdd: FFFFF802718D0000 - FFFFF802718F0FFF [xen.sys]
xen|ModuleAdd: FFFFF80271900000 - FFFFF80271910FFF [xenfilt.sys]
xen|ModuleAdd: FFFFF80271920000 - FFFFF8027194EFFF [pdc.sys]
xen|ModuleAdd: FFFFF80271950000 - FFFFF80271967FFF [CEA.sys]
xen|ModuleAdd: FFFFF80271970000 - FFFFF802719A0FFF [partmgr.sys]
xen|ModuleAdd: FFFFF802719B0000 - FFFFF80271A7BFFF [spaceport.sys]
xen|ModuleAdd: FFFFF80271A80000 - FFFFF80271A99FFF [volmgr.sys]
xen|ModuleAdd: FFFFF80271AA0000 - FFFFF80271B02FFF [volmgrx.sys]
xen|ModuleAdd: FFFFF80271B10000 - FFFFF80271B1AFFF [intelide.sys]
xen|ModuleAdd: FFFFF80271B20000 - FFFFF80271B32FFF [PCIIDEX.SYS]
xen|ModuleAdd: FFFFF80271B40000 - FFFFF80271B5DFFF [mountmgr.sys]
xen|ModuleAdd: FFFFF80271B60000 - FFFFF80271B6CFFF [atapi.sys]
xen|ModuleAdd: FFFFF80271B70000 - FFFFF80271BABFFF [ataport.SYS]
xen|ModuleAdd: FFFFF80271BB0000 - FFFFF80271BE5FFF [stornvme.sys]
xen|ModuleAdd: FFFFF80271BF0000 - FFFFF80271CBAFFF [storport.sys]
xen|ModuleAdd: FFFFF80271CC0000 - FFFFF80271CDBFFF [xenvbd.sys]
xen|ModuleAdd: FFFFF80271CE0000 - FFFFF80271D19FFF [xencrsh.sys]
xen|ModuleAdd: FFFFF80271D20000 - FFFFF80271D2DFFF [xendisk.sys]
xen|ModuleAdd: FFFFF80271D30000 - FFFFF80271D51FFF [EhStorClass.sys]
xen|ModuleAdd: FFFFF80271D60000 - FFFFF80271DA1FFF [Wof.sys]
xen|ModuleAdd: FFFFF80271DB0000 - FFFFF80271E19FFF [WdFilter.sys]
xen|ModuleAdd: FFFFF80271E20000 - FFFFF80272130FFF [Ntfs.sys]
xen|ModuleAdd: FFFFF80272140000 - FFFFF8027214CFFF [Fs_Rec.sys]
xen|ModuleAdd: FFFFF80272150000 - FFFFF80272182FFF [ksecpkg.sys]
xen|ModuleAdd: FFFFF80272190000 - FFFFF802724AEFFF [tcpip.sys]
xen|ModuleAdd: FFFFF802724B0000 - FFFFF80272530FFF [fwpkclnt.sys]
xen|ModuleAdd: FFFFF80272540000 - FFFFF8027256FFFF [wfplwfs.sys]
xen|ModuleAdd: FFFFF80272580000 - FFFFF8027258AFFF [volume.sys]
xen|ModuleAdd: FFFFF80272590000 - FFFFF80272603FFF [volsnap.sys]
xen|ModuleAdd: FFFFF80272610000 - FFFFF80272635FFF [mup.sys]
xen|ModuleAdd: FFFFF80272640000 - FFFFF8027264FFFF [hwpolicy.sys]
xen|ModuleAdd: FFFFF80272660000 - FFFFF8027267EFFF [disk.sys]
xen|ModuleAdd: FFFFF80272680000 - FFFFF802726F4FFF [CLASSPNP.SYS]
xen|UnplugSetRequest: DISKS (0)
xen|UnplugSetRequest: NICS (0)
xenbus|DriverEntry: 9.1.9 (105) (10.09.2024)
xen|LogReadLogLevel: fail1 (c0000034)
xen|ConfigSetActive: PCI\VEN_5853&DEV_0002&SUBSYS_00015853&REV_01\18: \Registry\Machine\System\CurrentControlSet\Services\pci,65536,0,3,0
xenbus|FdoCreate: FFFF9A05CD4AB550 (XS0002 XENBUS) [ACTIVE]
xen|FiltersInstallClass: DEVCLASS_SYSTEM XENFILT
xen|FiltersInstallClass: DEVCLASS_HDC XENFILT
xenbus|FdoConnectInterrupt: FFFF9A05CD90E6E0: Shared LevelSensitive CPU 0:0 VECTOR a1
xenbus|FdoConnectInterrupt: FFFF9A05CD4AE6E0: DeviceExclusive Latched CPU 0:0 VECTOR b1
xenbus|FdoConnectInterrupt: FFFF9A05CD4AD6E0: DeviceExclusive Latched CPU 0:1 VECTOR b1
xenbus|FdoScan: ====>
xenbus|FdoSuspend: ====>
xenbus|FdoBalloon: ====>
xenbus|FdoPciHoleCreate: 000f0000 - 000f0fff
xenbus|EvtchnAbiAcquire: FIFO
xenbus|EvtchnInterruptEnable: CPU 0:0 (Vector = 177)
xenbus|EvtchnInterruptEnable: CPU 0:1 (Vector = 177)
xenbus|EvtchnInterruptEnable: CALLBACK VIA (Vector = 28)
xenbus|GnttabExpand: added references [00000020 - 000001ff]
xenbus|EvtchnFifoExpand: added ports [00000000 - 000003ff]
xenbus|__FdoVirqCreate: DEBUG: CPU 0:0
xenbus|PdoCreate: FFFF9A05CD8DB530 (VBD)
xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2
xenbus|PdoCreate: FFFF9A05CD8DA530 (VIF)
xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2
xenbus|PdoCreate: FFFF9A05CD8D94B0 (IFACE)
xenbus|PdoDumpRevisions: 09000008 -> SUSPEND v1 SHARED_INFO v3 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 09000009 -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v1 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000A -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v2 CONSOLE v1 EMULATED v2
xenbus|PdoDumpRevisions: 0900000B -> SUSPEND v1 SHARED_INFO v4 EVTCHN v9 DEBUG v1 STORE v2 RANGE_SET v1 CACHE v2 GNTTAB v4 UNPLUG v3 CONSOLE v1 EMULATED v2
xenfilt|DriverEntry: 9.1.9 (105) (10.09.2024)
xenfilt|DriverAddDevice: FFFF9A05CD8E2360 UNKNOWN
xenfilt|DriverGetEmulatedType: MATCH: Internal_IDE_Channel -> IDE
xenfilt|DriverAddDevice: FFFF9A05CD8DE270 IDE
xenfilt|FdoCreate: FFFF9A05CD5DDDA0 (PCIIDE\IDEChannel\0)
xenfilt|DriverGetEmulatedType: MATCH: Internal_IDE_Channel -> IDE
xenfilt|DriverAddDevice: FFFF9A05CD8DE5A0 IDE
xenfilt|FdoCreate: FFFF9A05CD939DA0 (PCIIDE\IDEChannel\1)
xenfilt|PdoCreate: FFFF9A05CD97A750 (IDE\CdRomQEMU_QEMU_DVD-ROM_______________________2.5+____\1.1.0)

Could you build a new template VM without any prebaked drivers to see if it's a driver or group policy issue?

I'm in the process of building a new template now using a vanilla ISO of Windows Server 2022. So far the VM is running fine; no BSOD after multiple reboots. I'll provide an update when patching is completed and I've turned the new VM to a template and built a VM from that.

kagbasi-ngc

@dinhngtu Some positive news to report.

The new template and VM I created, using a vanilla ISO directly from Microsoft, is working flawlessly. I am able to control it from within the OS and by using the XO controls. I've performed many reboots and shutdowns, and thus far no BSOD.

Unfortunately, this suggests that there may be something with the hardening of the Secured Host Baseline image I'm using; which means my case for getting Vates VMS adopted is now weaker, until we identify the root cause of the BSOD.