Multiple IP addresses on PIF via GUI
-
Hi guys,
I would like my hypervisor to be reachable both via a static IPv4 and a static ULA IPv6.
However, configuring an IPv6 address like this doesn't seem to work:
Manually assigning an IPv6 via xe cli doesn't give any error message and doesn't do anything either:
xe pif-reconfigure-ipv6 uuid=50570aa4-c0ca-89aa-ce9c-be5aa21774aa mode=static gateway=fd4:50:50:33::1 IPv6=fd4:50:50:33::41/64 DNS=fd4:50:50:33::1I have tried multiple combinations with and without DNS and gateway and with the full 0-padded address instead of the short form.
Can I somehow assign a static IPv6 in the XOA web interface? Where will the IPv6 address be shown in the web interface?
-
L luca steinke marked this topic as a question on
-
@luca-steinke Hi !
IPv6 is not (yet) supported in dom0, but it's a work in progress
You can read more here: https://xcp-ng.org/blog/2021/02/09/ipv6-in-xcp-ng/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login