@Forza It's another branch of XO

olt-supermicro-ipmi

@olivierlambert Which log file do you want?

@olivierlambert said in Is supermicro IPMI data display planned?:

Yes, sorry I have the BMC IP, but not inlet nor outlet temp, I will check why you don't have total power.

edit: in the sensor data you sent, I don't have any total power available

found this:

[15:34 xcp01 ~]# ipmitool dcmi power reading

    Instantaneous power reading:                   166 Watts
    Minimum during sampling period:                121 Watts
    Maximum during sampling period:                259 Watts
    Average power reading over sample period:      156 Watts
    IPMI timestamp:                           Fri Oct 31 19:34:59 2025
    Sampling period:                          01678461 Seconds.
    Power reading state is:                   activated

@olivierlambert It a Supermicro MB in a SuperMicro chassis. So I have data from the power supply.

@olivierlambert From a SuperMicro X10DRH-ct

[{"name": "CPU1 Temp", "value": "45 degrees C", "event": "ok"}, {"name": "CPU2 Temp", "value": "51 degrees C", "event": "ok"}, {"name": "PCH Temp", "value": "41 degrees C", "event": "ok"}, {"name": "System Temp", "value": "29 degrees C", "event": "ok"}, {"name": "Peripheral Temp", "value": "43 degrees C", "event": "ok"}, {"name": "MB_10G Temp", "value": "52 degrees C", "event": "ok"}, {"name": "Vcpu1VRM Temp", "value": "35 degrees C", "event": "ok"}, {"name": "Vcpu2VRM Temp", "value": "46 degrees C", "event": "ok"}, {"name": "VmemABVRM Temp", "value": "32 degrees C", "event": "ok"}, {"name": "VmemCDVRM Temp", "value": "35 degrees C", "event": "ok"}, {"name": "VmemEFVRM Temp", "value": "35 degrees C", "event": "ok"}, {"name": "VmemGHVRM Temp", "value": "36 degrees C", "event": "ok"}, {"name": "P1-DIMMA1 Temp", "value": "31 degrees C", "event": "ok"}, {"name": "P1-DIMMA2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMB1 Temp", "value": "29 degrees C", "event": "ok"}, {"name": "P1-DIMMB2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMC1 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMC2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMD1 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMD2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMME1 Temp", "value": "32 degrees C", "event": "ok"}, {"name": "P2-DIMME2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMF1 Temp", "value": "33 degrees C", "event": "ok"}, {"name": "P2-DIMMF2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMG1 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMG2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMH1 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMH2 Temp", "value": "no reading", "event": "ns"}, {"name": "FAN1", "value": "3400 RPM", "event": "ok"}, {"name": "FAN2", "value": "no reading", "event": "ns"}, {"name": "FAN3", "value": "3200 RPM", "event": "ok"}, {"name": "FAN4", "value": "1800 RPM", "event": "ok"}, {"name": "FAN5", "value": "no reading", "event": "ns"}, {"name": "FAN6", "value": "1700 RPM", "event": "ok"}, {"name": "FANA", "value": "3500 RPM", "event": "ok"}, {"name": "FANB", "value": "no reading", "event": "ns"}, {"name": "12V", "value": "12 Volts", "event": "ok"}, {"name": "5VCC", "value": "5.03 Volts", "event": "ok"}, {"name": "3.3VCC", "value": "3.35 Volts", "event": "ok"}, {"name": "VBAT", "value": "2.97 Volts", "event": "ok"}, {"name": "Vcpu1", "value": "1.80 Volts", "event": "ok"}, {"name": "Vcpu2", "value": "1.79 Volts", "event": "ok"}, {"name": "VDIMMAB", "value": "1.20 Volts", "event": "ok"}, {"name": "VDIMMCD", "value": "1.20 Volts", "event": "ok"}, {"name": "VDIMMEF", "value": "1.20 Volts", "event": "ok"}, {"name": "VDIMMGH", "value": "1.20 Volts", "event": "ok"}, {"name": "5VSB", "value": "4.92 Volts", "event": "ok"}, {"name": "3.3VSB", "value": "3.30 Volts", "event": "ok"}, {"name": "1.5V PCH", "value": "1.51 Volts", "event": "ok"}, {"name": "1.2V BMC", "value": "1.22 Volts", "event": "ok"}, {"name": "1.05V PCH", "value": "1.05 Volts", "event": "ok"}, {"name": "Chassis Intru", "value": "0x01", "event": "ok"}, {"name": "PS1 Status", "value": "0x01", "event": "ok"}, {"name": "MB/AOM_SAS Te", "value": "48 degrees C", "event": "ok"}, {"name": "HDD Status", "value": "no reading", "event": "ns"}]

@olivierlambert From a Supermicro X10DRH-i board

[{"name": "CPU1 Temp", "value": "52 degrees C", "event": "ok"}, {"name": "CPU2 Temp", "value": "65 degrees C", "event": "ok"}, {"name": "PCH Temp", "value": "37 degrees C", "event": "ok"}, {"name": "System Temp", "value": "31 degrees C", "event": "ok"}, {"name": "Peripheral Temp", "value": "38 degrees C", "event": "ok"}, {"name": "Vcpu1VRM Temp", "value": "42 degrees C", "event": "ok"}, {"name": "Vcpu2VRM Temp", "value": "53 degrees C", "event": "ok"}, {"name": "VmemABVRM Temp", "value": "33 degrees C", "event": "ok"}, {"name": "VmemCDVRM Temp", "value": "33 degrees C", "event": "ok"}, {"name": "VmemEFVRM Temp", "value": "41 degrees C", "event": "ok"}, {"name": "VmemGHVRM Temp", "value": "39 degrees C", "event": "ok"}, {"name": "P1-DIMMA1 Temp", "value": "33 degrees C", "event": "ok"}, {"name": "P1-DIMMA2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMB1 Temp", "value": "32 degrees C", "event": "ok"}, {"name": "P1-DIMMB2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMC1 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMC2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMD1 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMD2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMME1 Temp", "value": "43 degrees C", "event": "ok"}, {"name": "P2-DIMME2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMF1 Temp", "value": "44 degrees C", "event": "ok"}, {"name": "P2-DIMMF2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMG1 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMG2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMH1 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMH2 Temp", "value": "no reading", "event": "ns"}, {"name": "FAN1", "value": "4100 RPM", "event": "ok"}, {"name": "FAN2", "value": "no reading", "event": "ns"}, {"name": "FAN3", "value": "4200 RPM", "event": "ok"}, {"name": "FAN4", "value": "no reading", "event": "ns"}, {"name": "FAN5", "value": "no reading", "event": "ns"}, {"name": "FAN6", "value": "no reading", "event": "ns"}, {"name": "FANA", "value": "2600 RPM", "event": "ok"}, {"name": "FANB", "value": "no reading", "event": "ns"}, {"name": "12V", "value": "11.87 Volts", "event": "ok"}, {"name": "5VCC", "value": "5.03 Volts", "event": "ok"}, {"name": "3.3VCC", "value": "3.35 Volts", "event": "ok"}, {"name": "VBAT", "value": "3.03 Volts", "event": "ok"}, {"name": "Vcpu1", "value": "1.79 Volts", "event": "ok"}, {"name": "Vcpu2", "value": "1.80 Volts", "event": "ok"}, {"name": "VDIMMAB", "value": "1.20 Volts", "event": "ok"}, {"name": "VDIMMCD", "value": "1.21 Volts", "event": "ok"}, {"name": "VDIMMEF", "value": "1.21 Volts", "event": "ok"}, {"name": "VDIMMGH", "value": "1.20 Volts", "event": "ok"}, {"name": "5VSB", "value": "4.92 Volts", "event": "ok"}, {"name": "3.3VSB", "value": "3.30 Volts", "event": "ok"}, {"name": "1.5V PCH", "value": "1.51 Volts", "event": "ok"}, {"name": "1.2V BMC", "value": "1.21 Volts", "event": "ok"}, {"name": "1.05V PCH", "value": "1.04 Volts", "event": "ok"}, {"name": "Chassis Intru", "value": "0x01", "event": "ok"}, {"name": "PS2 Status", "value": "0x01", "event": "ok"}]

@anthoineb Thank you for the assist. Was able to restore the storage to migrate to another storage device.

I had a node failure due to hardware. I fixed the hardware issue and brought the system back up and instead of

linstor node restore 

I did

linstor node lost

The node was removed.

Is there any recovery for this? (like getting the VHD of the VM).

Thanks,

@lavamind good. I was following a different thread of the bug. Back to try iscsi again.

I been using xenserver in a hobbiest role for years. I too was disappointed in the removal of features as I was looking forward to using some, such as gpu pass through. I just recently installed xcp-ng over xs7.4 and stared to play with it with XO. While my servers are server grade but storage is still not up there. I tried using iscsi to freenas over 10gig in xs but tripped over that iscsi bug in xs and hanging up on reboot. So I went back to local storage using software raid. I look forward in contribute to the community to improve xcp-ng.