@anthoineb Thank you for the assist. Was able to restore the storage to migrate to another storage device.
Best posts made by acp
-
RE: Recovery from lost node
-
RE: Introduce yourself!
@lavamind good. I was following a different thread of the bug. Back to try iscsi again.
-
RE: Introduce yourself!
I been using xenserver in a hobbiest role for years. I too was disappointed in the removal of features as I was looking forward to using some, such as gpu pass through. I just recently installed xcp-ng over xs7.4 and stared to play with it with XO. While my servers are server grade but storage is still not up there. I tried using iscsi to freenas over 10gig in xs but tripped over that iscsi bug in xs and hanging up on reboot. So I went back to local storage using software raid. I look forward in contribute to the community to improve xcp-ng.
Latest posts made by acp
-
RE: Is supermicro IPMI data display planned?
@Forza It's another branch of XO
olt-supermicro-ipmi -
RE: Is supermicro IPMI data display planned?
@olivierlambert Which log file do you want?
-
RE: Is supermicro IPMI data display planned?
@olivierlambert said in Is supermicro IPMI data display planned?:
Yes, sorry I have the BMC IP, but not inlet nor outlet temp, I will check why you don't have total power.
edit: in the sensor data you sent, I don't have any total power available

found this:
[15:34 xcp01 ~]# ipmitool dcmi power reading Instantaneous power reading: 166 Watts Minimum during sampling period: 121 Watts Maximum during sampling period: 259 Watts Average power reading over sample period: 156 Watts IPMI timestamp: Fri Oct 31 19:34:59 2025 Sampling period: 01678461 Seconds. Power reading state is: activated -
RE: Is supermicro IPMI data display planned?
@olivierlambert It a Supermicro MB in a SuperMicro chassis. So I have data from the power supply.

-
RE: Is supermicro IPMI data display planned?
@olivierlambert From a SuperMicro X10DRH-ct
[{"name": "CPU1 Temp", "value": "45 degrees C", "event": "ok"}, {"name": "CPU2 Temp", "value": "51 degrees C", "event": "ok"}, {"name": "PCH Temp", "value": "41 degrees C", "event": "ok"}, {"name": "System Temp", "value": "29 degrees C", "event": "ok"}, {"name": "Peripheral Temp", "value": "43 degrees C", "event": "ok"}, {"name": "MB_10G Temp", "value": "52 degrees C", "event": "ok"}, {"name": "Vcpu1VRM Temp", "value": "35 degrees C", "event": "ok"}, {"name": "Vcpu2VRM Temp", "value": "46 degrees C", "event": "ok"}, {"name": "VmemABVRM Temp", "value": "32 degrees C", "event": "ok"}, {"name": "VmemCDVRM Temp", "value": "35 degrees C", "event": "ok"}, {"name": "VmemEFVRM Temp", "value": "35 degrees C", "event": "ok"}, {"name": "VmemGHVRM Temp", "value": "36 degrees C", "event": "ok"}, {"name": "P1-DIMMA1 Temp", "value": "31 degrees C", "event": "ok"}, {"name": "P1-DIMMA2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMB1 Temp", "value": "29 degrees C", "event": "ok"}, {"name": "P1-DIMMB2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMC1 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMC2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMD1 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMD2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMME1 Temp", "value": "32 degrees C", "event": "ok"}, {"name": "P2-DIMME2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMF1 Temp", "value": "33 degrees C", "event": "ok"}, {"name": "P2-DIMMF2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMG1 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMG2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMH1 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMH2 Temp", "value": "no reading", "event": "ns"}, {"name": "FAN1", "value": "3400 RPM", "event": "ok"}, {"name": "FAN2", "value": "no reading", "event": "ns"}, {"name": "FAN3", "value": "3200 RPM", "event": "ok"}, {"name": "FAN4", "value": "1800 RPM", "event": "ok"}, {"name": "FAN5", "value": "no reading", "event": "ns"}, {"name": "FAN6", "value": "1700 RPM", "event": "ok"}, {"name": "FANA", "value": "3500 RPM", "event": "ok"}, {"name": "FANB", "value": "no reading", "event": "ns"}, {"name": "12V", "value": "12 Volts", "event": "ok"}, {"name": "5VCC", "value": "5.03 Volts", "event": "ok"}, {"name": "3.3VCC", "value": "3.35 Volts", "event": "ok"}, {"name": "VBAT", "value": "2.97 Volts", "event": "ok"}, {"name": "Vcpu1", "value": "1.80 Volts", "event": "ok"}, {"name": "Vcpu2", "value": "1.79 Volts", "event": "ok"}, {"name": "VDIMMAB", "value": "1.20 Volts", "event": "ok"}, {"name": "VDIMMCD", "value": "1.20 Volts", "event": "ok"}, {"name": "VDIMMEF", "value": "1.20 Volts", "event": "ok"}, {"name": "VDIMMGH", "value": "1.20 Volts", "event": "ok"}, {"name": "5VSB", "value": "4.92 Volts", "event": "ok"}, {"name": "3.3VSB", "value": "3.30 Volts", "event": "ok"}, {"name": "1.5V PCH", "value": "1.51 Volts", "event": "ok"}, {"name": "1.2V BMC", "value": "1.22 Volts", "event": "ok"}, {"name": "1.05V PCH", "value": "1.05 Volts", "event": "ok"}, {"name": "Chassis Intru", "value": "0x01", "event": "ok"}, {"name": "PS1 Status", "value": "0x01", "event": "ok"}, {"name": "MB/AOM_SAS Te", "value": "48 degrees C", "event": "ok"}, {"name": "HDD Status", "value": "no reading", "event": "ns"}] -
RE: Is supermicro IPMI data display planned?
@olivierlambert From a Supermicro X10DRH-i board
[{"name": "CPU1 Temp", "value": "52 degrees C", "event": "ok"}, {"name": "CPU2 Temp", "value": "65 degrees C", "event": "ok"}, {"name": "PCH Temp", "value": "37 degrees C", "event": "ok"}, {"name": "System Temp", "value": "31 degrees C", "event": "ok"}, {"name": "Peripheral Temp", "value": "38 degrees C", "event": "ok"}, {"name": "Vcpu1VRM Temp", "value": "42 degrees C", "event": "ok"}, {"name": "Vcpu2VRM Temp", "value": "53 degrees C", "event": "ok"}, {"name": "VmemABVRM Temp", "value": "33 degrees C", "event": "ok"}, {"name": "VmemCDVRM Temp", "value": "33 degrees C", "event": "ok"}, {"name": "VmemEFVRM Temp", "value": "41 degrees C", "event": "ok"}, {"name": "VmemGHVRM Temp", "value": "39 degrees C", "event": "ok"}, {"name": "P1-DIMMA1 Temp", "value": "33 degrees C", "event": "ok"}, {"name": "P1-DIMMA2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMB1 Temp", "value": "32 degrees C", "event": "ok"}, {"name": "P1-DIMMB2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMC1 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMC2 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMD1 Temp", "value": "no reading", "event": "ns"}, {"name": "P1-DIMMD2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMME1 Temp", "value": "43 degrees C", "event": "ok"}, {"name": "P2-DIMME2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMF1 Temp", "value": "44 degrees C", "event": "ok"}, {"name": "P2-DIMMF2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMG1 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMG2 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMH1 Temp", "value": "no reading", "event": "ns"}, {"name": "P2-DIMMH2 Temp", "value": "no reading", "event": "ns"}, {"name": "FAN1", "value": "4100 RPM", "event": "ok"}, {"name": "FAN2", "value": "no reading", "event": "ns"}, {"name": "FAN3", "value": "4200 RPM", "event": "ok"}, {"name": "FAN4", "value": "no reading", "event": "ns"}, {"name": "FAN5", "value": "no reading", "event": "ns"}, {"name": "FAN6", "value": "no reading", "event": "ns"}, {"name": "FANA", "value": "2600 RPM", "event": "ok"}, {"name": "FANB", "value": "no reading", "event": "ns"}, {"name": "12V", "value": "11.87 Volts", "event": "ok"}, {"name": "5VCC", "value": "5.03 Volts", "event": "ok"}, {"name": "3.3VCC", "value": "3.35 Volts", "event": "ok"}, {"name": "VBAT", "value": "3.03 Volts", "event": "ok"}, {"name": "Vcpu1", "value": "1.79 Volts", "event": "ok"}, {"name": "Vcpu2", "value": "1.80 Volts", "event": "ok"}, {"name": "VDIMMAB", "value": "1.20 Volts", "event": "ok"}, {"name": "VDIMMCD", "value": "1.21 Volts", "event": "ok"}, {"name": "VDIMMEF", "value": "1.21 Volts", "event": "ok"}, {"name": "VDIMMGH", "value": "1.20 Volts", "event": "ok"}, {"name": "5VSB", "value": "4.92 Volts", "event": "ok"}, {"name": "3.3VSB", "value": "3.30 Volts", "event": "ok"}, {"name": "1.5V PCH", "value": "1.51 Volts", "event": "ok"}, {"name": "1.2V BMC", "value": "1.21 Volts", "event": "ok"}, {"name": "1.05V PCH", "value": "1.04 Volts", "event": "ok"}, {"name": "Chassis Intru", "value": "0x01", "event": "ok"}, {"name": "PS2 Status", "value": "0x01", "event": "ok"}] -
RE: Recovery from lost node
@anthoineb Thank you for the assist. Was able to restore the storage to migrate to another storage device.
-
Recovery from lost node
I had a node failure due to hardware. I fixed the hardware issue and brought the system back up and instead of
linstor node restoreI did
linstor node lostThe node was removed.
Is there any recovery for this? (like getting the VHD of the VM).
Thanks,
-
RE: Introduce yourself!
@lavamind good. I was following a different thread of the bug. Back to try iscsi again.
