USB passthrough test reports in 7.5RC1

fjen

Because I was passing through a USB Bluetooth dongle, I had to specifically create an "allow" entry in /etc/xensource/usb-policy.conf.

Run lsusb and identify the device to be passed through.

Bus 001 Device 002: ID 1b70:100f
Bus 001 Device 003: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS
Bus 001 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 001 Device 005: ID 0557:7000 ATEN International Co., Ltd Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0557:2419 ATEN International Co., Ltd

I happened to want to pass through the Cambridge Silicon Radio entry. Note the ID of 0a12:0001. The format is vid:pid that will come in handy later.

Run /opt/xensource/libexec/usb_scan.py -d and run cat /var/log/user.log | grep "'idVendor': '<vid>'". I found the line that had:

Aug  1 11:56:24 ascension usb_scan.py DEBUG: UsbDevice: (u'1-12', {'idVendor': '0a12', 'ID_VENDOR_FROM_DATABASE': u'Cambridge Silicon Radio, Ltd', 'bConfigurationValue': '1', 'bDeviceClass': 'e0', 'ID_MODEL_FROM_DATABASE': u'Bluetooth Dongle (HCI mode)', 'version': ' 2.00', 'idProduct': '0001', 'bNumInterfaces': ' 2', 'serial': '', 'bcdDevice': '8891'})#012#011|__ UsbInterface: (u'1-12:1.0', {'bInterfaceNumber': '00', 'bInterfaceClass': 'e0', 'bInterfaceProtocol': '01', 'bInterfaceSubClass': '01'})#012#011|__ UsbInterface: (u'1-12:1.1', {'bInterfaceNumber': '01', 'bInterfaceClass': 'e0', 'bInterfaceProtocol': '01', 'bInterfaceSubClass': '01'})

but a different device would have a different line but similar content. Note down the 'bDeviceClass'.

Edit the /etc/xensource/usb-policy.conf file and add

ALLOW:vid=<vid> pid=<pid> class=<bDeviceClass>

using the values from earlier.

Rerun /opt/xensource/libexec/usb_scan.py -d and the USB Device should now be added.

Now to actually pass through the USB to the VM.

Run xe pusb-list. My output is:

uuid ( RO)            : f20850de-c998-5541-4d16-f06eccf87b40
            path ( RO): 1-12
       vendor-id ( RO): 0a12
     vendor-desc ( RO): Cambridge Silicon Radio, Ltd
      product-id ( RO): 0001
    product-desc ( RO): Bluetooth Dongle (HCI mode)
          serial ( RO):
         version ( RO): 2.00
     description ( RO): Cambridge Silicon Radio, Ltd_Bluetooth Dongle (HCI mode)


uuid ( RO)            : 8560df9a-d712-687b-1f36-3ecd1c84dad1
            path ( RO): 1-2
       vendor-id ( RO): 0764
     vendor-desc ( RO): Cyber Power System, Inc.
      product-id ( RO): 0501
    product-desc ( RO): CP1500 AVR UPS
          serial ( RO):
         version ( RO): 1.10
     description ( RO): Cyber Power System, Inc._CP1500 AVR UPS

I actually have 2 USB devices but I didn't want to pass through the UPS. Note the UUID of the USB device: f20850de-c998-5541-4d16-f06eccf87b40.

Run xe pusb-param-set uuid=<uuid> passthrough-enabled=true with the UUID from earlier.
Shutdown the target VM.
Run xe usb-group-list PUSB-uuids=<uuid>. For me, output is:

uuid ( RO)                : 316ac764-39fe-4120-0d6a-759ecb81a1ea
          name-label ( RW): Group of 0a12 0001 USBs
    name-description ( RW):

Note the group UUID of 316ac764-39fe-4120-0d6a-759ecb81a1ea.

Run xe vusb-create usb-group-uuid=<group_uuid> vm-uuid=<vm_uuid>
Run xe vm-start uuid=<vm_uuid>

Those are the exact procedures I followed to try to get my USB passed through. Hope it will help troubleshoot!

For most devices, you probably don't have to do the first section. My UPS showed up perfect fine without the first section.

Aimdev

@fjen said in XCP-ng 7.5.0 Release Candidate:

@aimdev

Just wanted to chime in here and say that USB Passthrough is also non-functional for me. Can't pass through a USB Bluetooth dongle, even though I added an allow run to the usb-policy.conf file and it shows up fine in the CLI and XCP-ng Center.

Hi

Thanks for the info.

My /etc/xensource/usb-policy.conf contained a DENY for class 2 devices

DENY: vid=17e9 # All DisplayLink USB displays
#DENY: class=02 # Communications and CDC-Control
ALLOW: class=02 subclass=02 # Communications and CDC-Control
ALLOW:vid=056a pid=0315 class=03 # Wacom Intuos tablet
ALLOW:vid=056a pid=0314 class=03 # Wacom Intuos tablet
ALLOW:vid=056a pid=00fb class=03 # Wacom DTU tablet
DENY: class=03 subclass=01 prot=01 # HID Boot keyboards
DENY: class=03 subclass=01 prot=02 # HID Boot mice
DENY: class=0a # CDC-Data
DENY: class=0b # Smartcard
DENY: class=e0 # Wireless controller
DENY: class=ef subclass=04 # Miscellaneous network devices
ALLOW:vid=1546 pid=01a8 class=02 # Ublox
ALLOW: # Otherwise allow everything else

My device is a class 2 device.
Aug 2 06:02:38 localhost usb_scan.py DEBUG: UsbDevice: (u'3-2', {'idVendor': '1546', 'ID_VENDOR_FROM_DATABASE': u'U-Blox AG', 'bConfigurationValue': '1', 'bDeviceClass': '02', 'ID_MODEL_FROM_DATABASE': '', 'version': ' 1.10', 'idProduct': '01a8', 'bNumInterfaces': ' 2', 'serial': '', 'bcdDevice': '0301'})#012#011|__ UsbInterface: (u'3-2:1.0', {'bInterfaceNumber': '00', 'bInterfaceClass': '02', 'bInterfaceProtocol': '01', 'bInterfaceSubClass': '02'})#012#011|__ UsbInterface: (u'3-2:1.1', {'bInterfaceNumber': '01', 'bInterfaceClass': '0a', 'bInterfaceProtocol': 'ff', 'bInterfaceSubClass': '00'})

I commented out the DENY, added an ALLOW for class 2, added the line for the UBLOX, which basically is a serial
device (its a gps receiver I am going to use as the source for a time server)

Rebooted

The result of the /opt/xensource/libexec/usb_scan.py -d command does not show the UBLOX, only the UPS.

Not sure if I have got the configuration correct.
I looked at the citrix docs, but until the scan shows the device, I cannot proceed any further.
I will take a look at the usb_scan.py to try and determine the rules.

Thanks

Aimee

olivierlambert

@fjen If I try your procedure, I can't boot the VM when it's attached to the vUSB device. I got:

# xe vm-start uuid=71700117-2d3f-1d99-9d3f-a2e106ac701a 
The value given is invalid
field: platform:device-model when vm has VUSBs
value: undefined

What did I miss?

fjen

@olivierlambert

Actually, re-doing the procedure on a fresh VM, I actually got the same error... This doesn't happen with XCP-ng Center though.

I can resolve it though by specifying the platform:device-model parameter.

xe vm-param-set uuid=<uuid> platform:device-model=qemu-upstream-compat

olivierlambert

@fjen

So I tried USB passthrough with a simple USB stick, and it worked perfectly. The stick is passed to my Windows VM without any issue, from both XCP-ng 7.5 RC1 and XenServer 7.5

You can see the "Vates (E:)" USB key dislayed here:

VM is a Windows 2012 R2 64 Bits. Followed the xe CLI instruction with success.

fjen

@olivierlambert Ah thanks for the test! Guess the feature just doesn't play well with my Bluetooth dongle and mouse.

olivierlambert

I'll try tomorrow with a wireless dongle for keyboard/mouse.

fjen

@olivierlambert Thank you!

Aimdev

@aimdev

Update

I removed all the rules except the allow all in /etc/xensource/usb-policy.conf
The U-blox device was present when running /opt/xensource/libexec/usb_scan.py -d
The device is present when running xe pusb-list
The device is present using xcp-ng centre
The configuration file clearly has an issue for me to resolve.
Followed instructions from @fjen , thanks for your efforts.
got this on vm startup
The value given is invalid
field: platform:device-model when vm has VUSBs
value: qemu-trad

issued command
xe vm-param-set uuid=<uuid> platform:device-model=qemu-upstream-compat
Started vm
cat /dev/ttyACM0 present and seeing gps messages.

It appears the only way to get this to work is via the cli.

Doing a reboot test next, fingers crossed, yes ok

Thanks

Aimee

Aimdev

@aimdev said in USB passthrough test reports in 7.5RC1:

@aimdev

Update

I removed all the rules except the allow all in /etc/xensource/usb-policy.conf
The U-blox device was present when running /opt/xensource/libexec/usb_scan.py -d
The device is present when running xe pusb-list
The device is present using xcp-ng centre
The configuration file clearly has an issue for me to resolve.
Followed instructions from @fjen , thanks for your efforts.
got this on vm startup
The value given is invalid
field: platform:device-model when vm has VUSBs
value: qemu-trad

issued command
xe vm-param-set uuid=<uuid> platform:device-model=qemu-upstream-compat
Started vm
cat /dev/ttyACM0 present and seeing gps messages.

It appears the only way to get this to work is via the cli.

Doing a reboot test next, fingers crossed, yes ok

Thanks

Aimee

Hi

Didn't survive the 7.5 RC1 to 7.5 upgrade, had to re configure it.
All working ok.

Aimee

olivierlambert

Yes that's normal config file are changed

Jianghuaw

I met the same issue after upgrading my host to 7.5. The information at here is helpful. Thanks.

BTW I guess xcp-ng doesn't support vUSB hotplug. Is there anyone know if there is any plan to support hot plug/unplug? Maybe depend on Citrix's plan on XenServer? Is there any workaround to support that with qemu?

DustinB

@olivierlambert said in USB passthrough test reports in 7.5RC1:

@fjen

So I tried USB passthrough with a simple USB stick, and it worked perfectly. The stick is passed to my Windows VM without any issue, from both XCP-ng 7.5 RC1 and XenServer 7.5

You can see the "Vates (E:)" USB key dislayed here:

VM is a Windows 2012 R2 64 Bits. Followed the xe CLI instruction with success.

Just an odd question. . .

Is that USB device available to just this one VM or to every VM?

olivierlambert

Not an odd question You assign the USB device to one VM only. IDK if it's possible to assign it to multiple VMs, but it sounds unlikely!

DustinB

@olivierlambert the reason I ask is I recall considering this option back on XS6.5 and simply opt'd to not use USB devices any longer.

It was just more of a headache using USB than it was using network attached storage.

Now for USB license fobs etc it could be an issue, but I would get a USB to network adapter in that scenario.

olivierlambert

Back in 6.5, it was probably passing through the whole USB controller, which is different with USB passthrough on 7.5 (just release since this version), where you can pass one specific device without taking the whole USB controller

cowboy

First off, thanks to @Aimdev and @fjen for providing a good write up of the steps taken to get USB passthrough to work.

I followed them all pretty much with out any difficulty and with no errors on anything for a Broadcom Bluetooth USB card (Broadcom Corp._BCM2045B) that's built into my laptop I'd like to pass through to a Linux VM.

And I get all the way up to where the USB device is correctly presented in the XCP-ng Centre application, but the device doesn't [seem to] appear at the OS level in dmesg | grep usbcore or lusb outputs in my guest OS VM.

However, since I didn't any failure to start the vm or other errors, I had not executed the final command: xe vm-param-set uuid=<VM UUID> platform:device-model=qemu-upstream-compat

But since the Broadcom chip still didn't appear in the guest Linux VM, I shutdown the VM and then executed the above command with the VM UUID.

But after a restart, the VM still doesn't see the Broadcom USB device.

Any idea what could be up or suggestions where I need to dig?

xiaolou86

@fjen I also got the same error...

INTERNAL_ERROR(xenopsd internal error: Call to usb reset failed: Forkhelpers.Spawn_internal_error("usage: usb_reset.py attach [-h] -d DOMID -p PID [-r RESET_ONLY] device\nusb_reset.py attach: error: argument -r: expected one argument\n", "", _))

Adrian Fretwell

@xiaolou86 Did you find a resolution for this issue?

stormi

For future reference, github issue related to USB passthrough: https://github.com/xcp-ng/xcp/issues/108

AdrianFretwell created this issue in xcp-ng/xcp

USB passthrough test reports in 7.5RC1

closed Starting a VM with USB passthrough results in Internal Server Error #108