continuous replication job - no progress

techjeff

@olivierlambert I am using XO from sources. I haven't yet tried Tony's suggestions, but because a lot can change when tracking the master branch, I'll try updating then share my results.

olivierlambert

That's the concept on being on the sources: you track the master branch. You are very likely on master (except if you didn't follow our doc, in that case, there's little we can do to help). Just pull and rebuild, it might work now

techjeff

@olivierlambert I just confirmed that I am indeed tracking master. I am using a third party tool that basically follows the steps in your doc. I understand you have no obligation to support any procedure other than the official doc, but I do appreciate your suggestions and insights -- this is a home system, nothing is running in "production" per se, but I like when I can get things workin as expected

I have updated to latest commit on master and rebuilt, I can confirm that my continuous replication to my local storage is working. Once that completes, I'll try replication to my NFS shared SR as well. Assuming that works, I'll try my metadata backup to my NFS Remotes, then finally I'll share my results here.

Thanks again!

olivierlambert

Good, so the fix @julien-f pushed on master solved it

In general, everytime you have an issue, follow the guide lines: get on latest commit on master and check if you still have the problem This will reduce the burden to answer multiple time to a problem already fixed.

Thanks for the feedback!

techjeff

@olivierlambert Now that you mention it, I do recall reading that we should always be on Master if I have issues -- I will commit that to memory and be sure to use that as a first-step

It's not often that we get to speak directly to the developers of quality projects and less often still that they are polite and helpful. Thank you for the assistance!

olivierlambert

You are very welcome, happy to learn that it works for you

HeMaN

@olivierlambert
I experienced also failed backups yesterday, XOCE 5.82.1 / 5.87.0

        "message": "connect ECONNREFUSED 192.168.20.71:443",
        "name": "Error",
        "stack": "Error: connect ECONNREFUSED 192.168.20.71:443\n    at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1148:16)\n    at TCPConnectWrap.callbackTrampoline (internal/async_hooks.js:131:17)"

First suspected the xcp-ng updates but I have had successfull backups after installing the patches so ruled that out.

I also had updated XOCE this week, so started looking into that.
Did an update to the current version of XOCE 5.82.2 / 5.87.0 and backups are working again.

Only thing I did not figure out right away; how to kill the still active tasks from the failed backup jobs? But a restart of the toolstack on the xcp-ng server fixed that as well

Of course after all the troubleshooting I went to the forum and found this topic. Should have done that first thing

olivierlambert

Always remember: as sources users, your "role" is to stay as close as possible to the latest master commit. This way, you are actively helping the project to spot issues that been missed during our usual dev review process

techjeff

@olivierlambert -- this may be related to xcp-ng bug 5929, but perhaps I don't know what types of traffic I need to allow through my firewall xo allow xoc to communicate with my storage network.

I am again on the latest commit to master as of today.

My Default Migration Network was set to my Storage network (10.0.60.0/24).
My storage server is 10.0.60.2 which hosts my default NFS SR as well as my xo nfs remotes.
xcp-ng-1 management interface is 10.0.10.11 with 10.0.60.11 on storage net
xcp-ng-2 (pool master) management interface is 10.0.10.12 with 10.0.60.12 on storage net

My xoc instance only had one interface on management network with address 10.0.10.10 and backups didn't work.

I added firewall rules allowing 10.0.10.10 to access 10.0.60.11 and 10.0.60.12 via tcp/udp 111,443, and 2049, but that made no impact on backups -- I saw via pftop that 10.0.10.10 (xoc) was contacting my pool master, xcp-ng-2 via 10.0.60.12:443 when I tried to start the backup. I didn't pay super-close attention, the connections did not stay active and disappeared after 30 seconds - 1 minute

I then added an interface to xoc on my storage network with address 10.0.60.10 to avoid the firewall altogether and started a CR job which proceeded almost immediately.

I then disconnected the xoc interface on the storage network, configured my default migration network back to the Management network, disabled my firewall rules and the backups worked again.

As per @julien-f in xcp-ng bug 5929 xo uses the pool's default migration network for stats, backups, etc. as of 5.62 and that it might not have been a good idea because xo might not always be able to access the storage network. Wouldn't xo always want to communicate with the pool master via the master's management interface, even if management interface is not on the default migration network? I had always assumed that hosts only listen for xapi commands on the management interface's IP -- is that correct or a misunderstanding on my part?

olivierlambert

Ping @julien-f and/or @fohdeesha