Tips on installing XO

lawrencesystems

use an account that is in the sudo list.

jasonnix

Thanks @lawrencesystems.
If I want to clone it manually, then which directory is OK? For example, "/home", "/tmp", etc.

lawrencesystems

If you are going to do it manually then choose whatever you want, but /tmp might not make much sense to put something important.

jasonnix

Hi @lawrencesystems,
Thanks again.
I want to clone XO under the /usr/local/src directory, but this directory requires root access. Is there a problem if I do this with the sudo command?

ElemondCraw

@jasonnix There is a paragraph about sudo in the install : https://xen-orchestra.com/docs/installation.html#sudo

DustinB

@jasonnix said in Tips on installing XO:

Hi @lawrencesystems,
Thanks again.
I want to clone XO under the /usr/local/src directory, but this directory requires root access. Is there a problem if I do this with the sudo command?

At this point I'm not sure if its intentional idiocy or not. Xen Orchestra does not get installed within XCP-ng's Dom0, it can be installed as a VM that is running as a guest on XCP-ng or on a separate environment entirely.

Read the documentation, install Ubuntu or Debian and then you install XO as an application on that system.

jasonnix

Hello,
I tried to install XO, but I got the following error:

$ sudo yarn
yarn install v1.22.21
[1/5] Validating package.json...
[2/5] Resolving packages...
[3/5] Fetching packages...
error https://registry.yarnpkg.com/react-sparklines/-/react-sparklines-1.6.0.tgz: Extracting tar content of undefined failed, the file appears to be corrupt: "ENOSPC: no space left on device, write"
info Visit https://yarnpkg.com/en/docs/cli/install for documentation about this command.

I have enough disk space:

$ sudo df -i
Filesystem     Inodes  IUsed  IFree IUse% Mounted on
udev           492266    395 491871    1% /dev
tmpfs          497999    589 497410    1% /run
/dev/xvda1     238560 139439  99121   59% /
tmpfs          497999      1 497998    1% /dev/shm
tmpfs          497999      3 497996    1% /run/lock
/dev/xvda6     354816  20966 333850    6% /home
tmpfs           99599     14  99585    1% /run/user/0
tmpfs           99599     19  99580    1% /run/user/1000
$
$ sudo lsblk
NAME    MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
sr0      11:0    1   16M  0 rom  
xvda    202:0    0   10G  0 disk 
├─xvda1 202:1    0  3.6G  0 part /
├─xvda2 202:2    0    1K  0 part 
├─xvda5 202:5    0  976M  0 part [SWAP]
└─xvda6 202:6    0  5.4G  0 part /home

Any idea?

AtaxyaNetwork

@jasonnix Hi !

Can you do a df -h instead of -i ?

jasonnix

Hi @AtaxyaNetwork,
I did:

$ sudo df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            1.9G     0  1.9G   0% /dev
tmpfs           390M  564K  389M   1% /run
/dev/xvda1      3.6G  3.5G     0 100% /
tmpfs           1.9G     0  1.9G   0% /dev/shm
tmpfs           5.0M     0  5.0M   0% /run/lock
/dev/xvda6      5.3G  247M  4.8G   5% /home
tmpfs           390M     0  390M   0% /run/user/0
tmpfs           390M     0  390M   0% /run/user/1000

Disk is full!

AtaxyaNetwork

@jasonnix Indeed

You can deploy a XOA and resize your VM disk with the GUI (the VM need to be shutdown), and then, resize your FS in the VM.

jasonnix

@AtaxyaNetwork, I prefer CLI for now.

AtaxyaNetwork

@jasonnix Why not using XOA ? It's really simpler than the CLI...

Anyway, you can shut down the VM and do:

xe vdi-resize uuid=<VDI of your VM> disk-size=XXGiB

jasonnix

Thanks @AtaxyaNetwork.
Shouldn't I create a hard disk first and then add it to the virtual machine and then use this hard disk to add space?

AtaxyaNetwork

@jasonnix No need to create a new disk, you can directly resize the existing disk

jasonnix

Thanks @AtaxyaNetwork.
I did:

# xe vm-list
uuid ( RO)           : bdd9b58c-06b1-3f3c-792b-72287bd73d0b
     name-label ( RW): XO
    power-state ( RO): halted

Then, I did:

# xe vdi-resize uuid=bdd9b58c-06b1-3f3c-792b-72287bd73d0b disk-size=20GiB
The uuid you supplied was invalid.
type: VDI
uuid: bdd9b58c-06b1-3f3c-792b-72287bd73d0b

What is wrong?

Danp

You need to supply the virtual disk's UUID, not the VM's UUID.

AtaxyaNetwork

@jasonnix You need the VDI UUID, not the VM UUID.

For example:

[12:42 Delirium ~]# xe vm-disk-list uuid=a0a05fc9-e454-181e-cff2-ed3c4010651f # <- VM UUID
Disk 0 VBD:
uuid ( RO)             : 448065c5-2f48-38cc-fa73-a8eda1ab6e61
    vm-name-label ( RO): XOA
       userdevice ( RW): 0


Disk 0 VDI:
uuid ( RO)             : d6354121-a3c6-4143-9cab-d65d4d8df769 # You need this one for the resize
       name-label ( RW): xoa root
    sr-name-label ( RO): sdc
     virtual-size ( RO): 21474836480

edit: @Danp was faster than me

jasonnix

Hi @Danp,
Thank you so much.
I did:

# xe vdi-list
uuid ( RO)                : aa52ebc5-31a1-4115-b37f-d37d8fddea6f
          name-label ( RW): XO 0
    name-description ( RW): Created by template provisioner
             sr-uuid ( RO): c5129868-a590-68ca-e587-db708ad61f38
        virtual-size ( RO): 10737418240
            sharable ( RO): false
           read-only ( RO): false
#
# xe vdi-resize uuid=aa52ebc5-31a1-4115-b37f-d37d8fddea6f disk-size=20GiB

Disk size applied:

$ sudo lsblk
NAME    MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
sr0      11:0    1   16M  0 rom  
xvda    202:0    0   20G  0 disk 
├─xvda1 202:1    0  3.6G  0 part /
├─xvda2 202:2    0    1K  0 part 
├─xvda5 202:5    0  976M  0 part [SWAP]
└─xvda6 202:6    0  5.4G  0 part /home

But not where I need!

AtaxyaNetwork

@jasonnix You need to resize your partition, currently the storage you added is not used

jasonnix

Hello,
I tried to use Git to clone the repository, but I got the following error:

$ sudo git clone -b master https://github.com/vatesfr/xen-orchestra
Cloning into 'xen-orchestra'...
remote: Enumerating objects: 124347, done.
remote: Counting objects: 100% (4318/4318), done.
remote: Compressing objects: 100% (1974/1974), done.
error: RPC failed; curl 92 HTTP/2 stream 5 was not closed cleanly: CANCEL (err 8)
error: 3713 bytes of body are still expected
fetch-pack: unexpected disconnect while reading sideband packet
fatal: early EOF
fatal: fetch-pack: invalid index-pack output

I changed some Git settings:

$ git config --global http.postBuffer 4096M
$ git config --global http.maxRequestBuffer 100M
$ git config --global core.compression 0

But it didn't matter. I downloaded the repository manually, but when installing I got the following error:

$ sudo yarn
yarn install v1.22.21
[1/5] Validating package.json...
[2/5] Resolving packages...
success Already up-to-date.
$ husky install
fatal: not a git repository (or any of the parent directories): .git
husky - git command not found, skipping install
Done in 4.41s.