XCP-NG 8.3 freezes HP Proliant DL380 Gen 9
-
Installation of XCP-NG 8.3 works fine on our HP Proliant DL380 Gen 9, but then randomly after some days the host just freeze. I have reinstalled it several times.
Its booting to UEFI. Earlier it has been running XenServer 8.1 (booting to Bios) and it never had any problems.
I ran all the hardware diagnostics for weeks and no problems found.Should I switch back to BIOS or is there any other things I could have missed?
-
Working on ours for years without issues. 8.2 and since release 8.3
Might be some hardware issue...
-
@manilx Is yours booting in BIOS or UEFI mode?
@Thunder-Cloud Have you checked to see that the BIOS / firmware is fully updated? Are there any crash logs in /var/crash?
-
@Danp UEFI
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login