CEPH FS Storage Driver

[r1]

So taking inspiration and doing small modifications to existing NFS driver, patch allows you to use both NFS and Ceph FS same time.

Note : The patch is applied against XCP-NG 7.6.0

# cd /
# wget "https://gist.githubusercontent.com/rushikeshjadhav/af53bb5747365875f0ab21bd3a64c6fe/raw/59ef7a4b54574e4163da1ac39acd640554bd0d24/ceph.patch"
# patch -p0 < ceph.patch

Apart from the patch, ceph.ko & ceph-common would be needed.

To install ceph-common on XCP-NG
# yum install centos-release-ceph-luminous --enablerepo=extras
# yum install ceph-common

To install and load ceph.ko
# wget -O ceph-4.4.52-4.0.12.x86_64.rpm "https://github.com/rushikeshjadhav/ceph-4.4.52/blob/master/RPMS/x86_64/ceph-4.4.52-4.0.12.x86_64.rpm?raw=true"
# yum install ceph-4.4.52-4.0.12.x86_64.rpm
# modprobe -v ceph (Optional)

User experience:

In Share Name, you can put multiple addresses from your CEPH mon.
In Advanced Options, you need to add your ceph authx user details, such as name and its secret file location. These will be used by mount.ceph.

Note: Keep secret file in /etc/ceph/ with permissions 600.

Current SR detection patch replies on presence of word "ceph" in advance options to discriminate between NFS and CEPH FS.

Log Location : /var/log/SMlog

Edit: Created RPM installer for ceph.ko

[maxcuttins]

[Edited to remove huge quote]

WOW @r1
This sound really good.

CephFS is the one with the worst performance.
But at least if it works it's better than nothing.
This also doesn't seems so disruptive but a small patch.
So I guess, less changes, less issues with the standard installation of XCP.

good job!
I'll start to test it at beginning of march.
Count on me.

[r1]

Thanks @maxcuttins. Let me know how it goes..

[r1]

RBD is faster because of client side caching.. Ceph FS does not do it but can be made faster by enabling fscache. Once you have your numbers we will retest with fscache

[scboley]

Ok I have mine in a very restricted environment and do not have any logins defined for the ceph access.
So saying that if I don't put any user authentication in the options will it still work? I had issues with your plugin around that same problem.
I'm also still on 7.5 will that be an issue and my ceph is mimic.

[r1]

Can you show your mount command by doing some example mount? e.g. #mount.ceph add1:remotepath localpath /mnt? Does this work as it is?

The advanced options are necessary for now to discriminate between NFS and Ceph. But I think once I know your working command, I will be able to generalize it.

BTW - I hope you installed the ceph.ko as mentioned in earlier steps.

[scboley]

@r1 I'm in planning phase right now since these boxes are actually production and I'll have to figure how to do this without it being a possible danger to my production enviro. The box I have that needs it the worst I still haven't upgraded from xenserver 6.5. I need to setup a fully dev box for this. I've got plans for upgrading my infrastructure for the ceph and virtual public network that this would help tremendously.

[r1]

Sadly XS 6.5 uses 3.10 kernel which does not support Ceph outright and you would most likely to update this host to a recent XCP version.

[scboley]

@r1 Yeah I just haven't had time yet since it has one of our heaviest used virtuals on it and not good to upset the masses lol.

[borzel]

@scboley said in CEPH FS Storage Driver:

and not good to upset the masses

this is the reason I worked at night the last two weeks at work

[scboley]

@r1 sudo mount -t ceph sanadmin.nams.net:6789: / /mnt/nfsmigrate

[r1]

@scboley nice. It should work straight as mentioned in 2nd post of this thread.

[maxcuttins]

Ok,

i start my adventure but I get soon an issue.

This command install the nautilus release Repo:

yum install centos-release-ceph-nautilus --enablerepo=extras

and worked fine.

This one should installed ceph-common but cannot find many dependencies

yum install ceph-common
Loaded plugins: fastestmirror
centos-ceph-nautilus                                                                                                                                | 2.9 kB  00:00:00
centos-ceph-nautilus/7/x86_64/primary_db                                                                                                            |  62 kB  00:00:00
Loading mirror speeds from cached hostfile
 * centos-ceph-nautilus: mirrors.prometeus.net
Resolving Dependencies
--> Running transaction check
---> Package ceph-common.x86_64 2:14.2.0-1.el7 will be installed
--> Processing Dependency: python-rgw = 2:14.2.0-1.el7 for package: 2:ceph-common-14.2.0-1.el7.x86_64

... [CUT] ...

Error: Package: 2:librgw2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: leveldb-1.12.0-5.el7.1.x86_64 (centos-ceph-nautilus)
           Requires: libsnappy.so.1()(64bit)
Error: Package: 2:libcephfs2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: liblz4.so.1()(64bit)
Error: Package: 2:libradosstriper1-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: 2:librbd1-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: python-requests
Error: Package: 2:librgw2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
Error: Package: 2:librados2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: 2:libcephfs2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libfuse.so.2()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libsnappy.so.1()(64bit)
Error: Package: 2:librbd1-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
Error: Package: 2:librados2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1(RDMACM_1.0)(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librabbitmq.so.4()(64bit)
Error: Package: 2:libradosstriper1-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
Error: Package: 2:librgw2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librabbitmq.so.4()(64bit)
Error: Package: 2:librados2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1()(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libtcmalloc.so.4()(64bit)
Error: Package: 2:librados2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1(IBVERBS_1.0)(64bit)
Error: Package: 2:librados2-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: libibverbs.so.1(IBVERBS_1.1)(64bit)
Error: Package: 2:ceph-common-14.2.0-1.el7.x86_64 (centos-ceph-nautilus)
           Requires: librdmacm.so.1()(64bit)
 You could try using --skip-broken to work around the problem
 You could try running: rpm -Va --nofiles --nodigest

Of course I'm using a higher version of Ceph than your post.
Any hint anyway?

[maxcuttins]

Ok, solved.
Of course Ceph need Epel and Base repo enabled.

This worked:

yum install epel-release -y --enablerepo=extras
yum install ceph-common --enablerepo='centos-ceph-nautilus' --enablerepo='epel' --enablerepo='base'

[maxcuttins]

@r1 said in CEPH FS Storage Driver:

patch -p0 < ceph.patch

This went not so smooth, reporting "unexpected end":

patch -p0 < ceph.patch
patching file /opt/xensource/sm/nfs.py
patching file /opt/xensource/sm/NFSSR.py
patch unexpectedly ends in middle of line
Hunk #3 succeeded at 197 with fuzz 1.

[r1]

Hi @maxcuttins - what's your XCP-NG version and can you share checksum for your NFSSR.py file?

[Rainer]

Hi,

I also play around with xcp-ng and ceph and just tried to use CephFS as a storage repos. I am using XCP-ng 8.0.0 with Ceph Nautilus. Before I tried to use lvm on top of a rbd which basically works but performance is really bad this way.

So I downloaded your patch and ran it on my test 8.0.0 xenserver, all Hunks succeeded. ceph is also installed, modprobe ceph works. Next I tried to add a new cephFs repository just as you described it above.

In the end I see an error box pooping up in XencCenter: "SM has thrown a generic python exception". And thats all.

In /var/log/SMlog I see the log attached below.

Thanks
Rainer

/var/log/SMLog:

Sep 26 09:42:54 rzinstal4 SM: [18075] lock: opening lock file /var/lock/sm/d63d0d49-522d-6160-a1eb-a9d5f34cec1e/sr
Sep 26 09:42:54 rzinstal4 SM: [18075] lock: acquired /var/lock/sm/d63d0d49-522d-6160-a1eb-a9d5f34cec1e/sr
Sep 26 09:42:54 rzinstal4 SM: [18075] sr_create {'sr_uuid': 'd63d0d49-522d-6160-a1eb-a9d5f34cec1e', 'subtask_of': 'DummyRef:|55cbc4ef-c6e9-4dba-aa5f-8f56b2473443|SR.create', 'args': ['0'], 'host_ref': 'OpaqueRef:0c03f516-7ed5-48ac-895b-51833177aed5', 'session_ref': 'OpaqueRef:d472846e-c6aa-467d-ac8b-0f401fbc698c', 'device_config': {'server': 'ip_of_mon', 'SRmaster': 'true', 'serverpath': '/sds', 'options': 'name=admin,secretfile=/etc/ceph/admin.secret'}, 'command': 'sr_create', 'sr_ref': 'OpaqueRef:9fb35d75-a45c-4ce4-b9f4-8ed8072ad6ad'}
Sep 26 09:42:54 rzinstal4 SM: [18075] ['/usr/sbin/rpcinfo', '-p', 'ip_of_mon']
Sep 26 09:42:54 rzinstal4 SM: [18075] FAILED in util.pread: (rc 1) stdout: '', stderr: 'rpcinfo: can't contact portmapper: RPC: Remote system error - Connection refused
Sep 26 09:42:54 rzinstal4 SM: [18075] '
Sep 26 09:42:54 rzinstal4 SM: [18075] Unable to obtain list of valid nfs versions
Sep 26 09:42:54 rzinstal4 SM: [18075] lock: released /var/lock/sm/d63d0d49-522d-6160-a1eb-a9d5f34cec1e/sr
Sep 26 09:42:54 rzinstal4 SM: [18075] ***** generic exception: sr_create: EXCEPTION <type 'exceptions.TypeError'>, not all arguments converted during string formatting
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 110, in run
Sep 26 09:42:54 rzinstal4 SM: [18075]     return self._run_locked(sr)
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 159, in _run_locked
Sep 26 09:42:54 rzinstal4 SM: [18075]     rv = self._run(sr, target)
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 323, in _run
Sep 26 09:42:54 rzinstal4 SM: [18075]     return sr.create(self.params['sr_uuid'], long(self.params['args'][0]))
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/NFSSR", line 216, in create
Sep 26 09:42:54 rzinstal4 SM: [18075]     raise exn
Sep 26 09:42:54 rzinstal4 SM: [18075]
Sep 26 09:42:54 rzinstal4 SM: [18075] ***** NFS VHD: EXCEPTION <type 'exceptions.TypeError'>, not all arguments converted during string formatting
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 372, in run
Sep 26 09:42:54 rzinstal4 SM: [18075]     ret = cmd.run(sr)
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 110, in run
Sep 26 09:42:54 rzinstal4 SM: [18075]     return self._run_locked(sr)
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 159, in _run_locked
Sep 26 09:42:54 rzinstal4 SM: [18075]     rv = self._run(sr, target)
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/SRCommand.py", line 323, in _run
Sep 26 09:42:54 rzinstal4 SM: [18075]     return sr.create(self.params['sr_uuid'], long(self.params['args'][0]))
Sep 26 09:42:54 rzinstal4 SM: [18075]   File "/opt/xensource/sm/NFSSR", line 216, in create
Sep 26 09:42:54 rzinstal4 SM: [18075]     raise exn
Sep 26 09:42:54 rzinstal4 SM: [18075]
Sep 26 09:42:54 rzinstal4 SM: [18075] lock: closed /var/lock/sm/d63d0d49-522d-6160-a1eb-a9d5f34cec1e/sr

[olivierlambert]

Hi @Rainer and welcome

Please use Markdown syntax for console/code blocks:

```
my test
```

[Rainer]

Hello oliverlambert,
thanks for the hint. I edited my post correcting the formatting.

[r1]

@Rainer Please share your NFSSR.py to check. Are you able to manually mount the SR using #mount.ceph addr1,addr2,addr3,addr4:remotepath localpath?