Build network drivers from sources
hi! I have this EN-9320TX-E network card.
Any simple way to add the driver to the xpg-ng kernel ?
I dont have any knowledge about docker..
Hi could you deliver me this iso file ?
Would be so great ..
cobraAG last edited by cobraAG
Import the .xva and there build the module. When you get the .ko file, copy that to your host server. Then do a
install -d /lib/modules/<KERNEL_VERSION>/kernel/drivers/net install -m 644 tn40xx.ko /lib/modules/<KERNEL_VERSION>/kernel/drivers/net depmod <KERNEL_VERSION>
Reboot the host and then check if it was loaded with:
lsmod | grep tn40xx
Don't forget to optimze for 10Gb: https://darksideclouds.wordpress.com/2016/10/10/tuning-10gb-nics-highway-to-hell/
I'm not sure this is the recommended way. @r1 can you check this?
The "correct" process is the one we use in XCP-ng, it would be great to stick (and improve) the "common" way
Also, if you add some drivers, please provide them so we could add them to the XCP-ng repo. This way, your work will be useful for everyone
Yeah - the XVA approach is old and long. Easier way is to build rpm and let it install the driver. (better via yum)
I'll take a look at it to build it XCP-NG way.
I'm using xcp-ng 7.4.1
I have EN-9320TX-E network card.
I tried to build network drivers from sources for xcp-ng but its very complicated process for me.
If somebody could do it for me i would be very gratefull.
Here is link with source drivers: https://www.edimax.pl/edimax/mw/cufiles/files/download/DriverUtility/NIC/EN-9320TX-E/EN-9320TX_E_Linux_Driver.zip
Here you have https://github.com/rushikeshjadhav/EN-9320TX
It would be great if you can let us know if RPM from it works for you.
@tom So - did it work?
I have XCP 8.1 installed und need the driver EN-9320SFP+
Cannot get it working. The drivers for Linux can be found here
Would be great if someone could help me with that.
Please open a support ticket, it's within our XCP-ng Enterprise support package