10GB backup with XOA (XCP to windows NFS)
-
After the test with Http://ipserver
the speed written in the backup report is 33,8 MiB/s.On XCP could i use iperf?
-
So it's a bit better indeed (25% better perfs!).
You can use
iperfindeed, but I already know the result: it won't be a bandwidth issue. It's all on the export speed of the host itself. -
What do you mean with export speed of the host?
10Gb nic or 1Gb nic are the same for XCP-ng or XOA? As i can see if I use 1Gb or 10Gb nothing change and the performance are bad in both cases. -
When you do a backup, this will happen:
- dom0 will access the VM disk (snapshot disk but whatever)
- it will create a HTTP handler where the disk data can be fetch
- it will give the URL of this HTTP handler to XO
- then XO will fetch from this HTTP(S) handler
- XO will stream the content of this handler to the NFS share
We know that a major bottleneck is the speed at which the HTTP handler can be fetch.
-
We checked the network interface status and we found that the network work as the attached picture.
Is that normal? it goes up and then to 0 and then up again, etc...
(this test is new and we used a 1Gb nic, to find if XOA use the 1Gb nic to its full)We will try the 10Gb soon.
-
Please be more explicit. What generated this output?
iperf? -
XOA backup.
We start a backup of a turned off Windows server 2016.
When we try to copy from a NAS to the same NFS share we don't have the same issue. -
With the 10Gb nic the issue is worse. Now we have the backup with 4-5 packets around 700MB and then 10-15 second with few KB, and then again 4-5 packets around 700MB.
Before we didn't have that much time without high transfer speed, i think because 10Gb nic can send more with less packets. -
Again, you need to think globally. The transfer speed is depending on the slowest element. If the HTTP handled can't export faster than let's say 30MiB/s, then it won't magically be transferred faster than that, despite having a 100G network.
You have export speed, SR speed, stream speed, write speed, protocol speed, read seek speed etc.
-
What do you mean with HTTP? can you be more specific with HTTP limitations?
-
I explained that here: https://xcp-ng.org/forum/post/28832
-
Do you know where i can find some data about HTTP handler on XCP/Xenserver? How much GB can be fetch in the handler?
-
Hi,
i opened this ticket because our datacenter has 67 VM and right now we take 20 Hours to make a full backup.
We need to fast it up a lot.
The differential backup need 5 hours to backup 350GB. -
I think it's likely the bottleneck, and except disabling HTTPS, there's no magical rule. You can play with concurrency in XO to see if it's better.
Also, it's not a "ticket" you opened, but a thread on a community forum, where people can answer on their free time.
-
Sorry, i know this isn't a ticket, i meant the question here on the forum.
and we write this thread because we cannot find a solution anywhere for our issue/question to speed up the backup.
We are making a lot of test right now, but we are not going better in anyway and we found a lot of limits in XOA/XCP-ng and Xen server 7.1 CU2 to, we are a bit worried about this issue with the backup. -
Note that you can scale up with concurrency (see https://xen-orchestra.com/docs/backups.html#backup-concurrency).
Also, if you have different pools, you could use XOA Proxies (alternatively, multiple XO from sources but it's less elegant) so you can accumulate all pool speed to get to a decent global speed.
-
We see about the same speed, just below 1Gbit/s no matter how many concurrent backups and what not. The bursting is probably due to buffering in the node-process.
I think this is a limitation in XAPI just like @olivierlambert wrote earlier and nothing much you can do in XO to speed it up.
We've been trying to speed things up for a long time, we ended up using the Delta-backup and Continious Replication which are both incremental. This allows us to backup all our VM's over night to our NFS-machines.
-
We'll get rid of potential stream buffer limitation in a relatively short time frame, but again, I'm pretty sure the export speed on the host is the real bottleneck.
As we are also working on XCP-ng storage performance in parallel, I'm confident we'll be able to improve that
-
I confirm what @nikade say. Even if i use a 10Gb and set the concurrent backup to 10, the speed will be always the same.
If we use proxy XOA or similar idea i think we can speed the backup but not to a point we would like.
We usually make a differential backup, but for us (67 VM = 300 GB transfer and 300 GB merged - diff backup, XOA take from 4 to 6 Hours). -
I'm confident we can improve this for you before the end of the year
@julien-f is working hard on that!
