Backup Remote VLAN
-
I can successfully connect to my backup remote if I use the main network address of my FreeNAS (vlan 1). However, I would like to direct the Backup Remote to use the IP address associated with a VLAN. If I just put the VLAN IP address in the HOST field, it doesn't work. Is there a custom mount option to use a VLAN?
(I tested the NFS share by attaching it as an NFS SR using the VLAN IP address. So, I know the NFS share works. I'm guessing the Backup Remote requires an extra configuration to use the VLAN)
Thanks.
-
Does your XO VM have an IP address in the same range as the NFS storage?
NFS doesn't need to be aware of your VLAN, that should all be a layer below.
From your XO VM, can you run:
showmount -e <freenas ip> -
@jedimarcus Oh, that makes sense. XO is managing the backup so it needs an IP on the VLAN. I was focusing on the hosts. Once I added a network interface on the XO server for the VLAN, everything worked as expected. Thanks!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login