Kubernetes Recipe - Basic setup not working
-
Hello,
Can the master communicate with the other nodes? What IP ranges did you use for kubernetes CIDR & for your VM IPs?
Thanks
-
@BenjiReis , yes, all of the nodes could communicate with each other. The CIDR supplied in the template was in a different range which didn't overlap existing ones (i.e. completely different). This morning, I had to move forward so manually deployed a 10 node cluster (< what a pain! ) and had to abandon the template for now. I do plan to try this again as I'm certain I may have been doing something wrong and it would make my life easier if I can get it working. One thing I noticed this morning is the master was out of disk space and only 4 GB was allocated . Seems pretty low. I'll try again sometime.
-
Ok, I'll try on my end to see if I encounter a similar error. Let me know how your next try goes.
Regards
-
I have exactly the same problem, tried different cidr's, changing it manually in the kube-controller-master and then restarting the kubelet service.
kubectl get pods -A -o wide NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES default kubernetes-bootcamp-57978f5f5d-mx8sd 0/1 Pending 0 6m52s <none> <none> <none> <none> kube-system coredns-f9fd979d6-8jjbs 0/1 ContainerCreating 0 83m <none> node-1 <none> <none> kube-system coredns-f9fd979d6-mn4d8 0/1 ContainerCreating 0 83m <none> node-1 <none> <none> kube-system etcd-master 1/1 Running 1 83m 192.168.1.52 master <none> <none> kube-system kube-apiserver-master 1/1 Running 1 83m 192.168.1.52 master <none> <none> kube-system kube-controller-manager-master 1/1 Running 0 35m 192.168.1.52 master <none> <none> kube-system kube-proxy-84k8x 1/1 Running 1 79m 192.168.1.55 node-2 <none> <none> kube-system kube-proxy-f5shp 1/1 Running 1 79m 192.168.1.53 node-1 <none> <none> kube-system kube-proxy-qg4bk 1/1 Running 1 83m 192.168.1.52 master <none> <none> kube-system kube-proxy-whcwv 1/1 Running 1 79m 192.168.1.54 node-3 <none> <none> kube-system kube-router-7zmtb 0/1 CrashLoopBackOff 22 79m 192.168.1.55 node-2 <none> <none> kube-system kube-router-llgqk 0/1 CrashLoopBackOff 23 79m 192.168.1.53 node-1 <none> <none> kube-system kube-router-q4m5d 0/1 CrashLoopBackOff 22 79m 192.168.1.54 node-3 <none> <none> kube-system kube-router-xs696 0/1 CrashLoopBackOff 33 83m 192.168.1.52 master <none> <none> kube-system kube-scheduler-master 1/1 Running 1 83m 192.168.1.52 master <none> <none> debian@master:~$ kubectl -n kube-system logs -f kube-router-7zmtb I1015 09:06:02.910389 1 kube-router.go:231] Running /usr/local/bin/kube-router version v1.1.0-dirty, built on 2020-10-02T22:14:14+0000, go1.13.13 F1015 09:06:03.015240 1 network_routes_controller.go:1060] Failed to get pod CIDR from node spec. kube-router relies on kube-controller-manager to allocate pod CIDR for the node or an annotation `kube-router.io/pod-cidr`. Error: node.Spec.PodCIDR not set for node: node-2 debian@master:~$ kubectl get nodes -o jsonpath='{.items[*].spec.podCIDR}' -A debian@master:~$ kubectl cluster-info dump -o yaml | grep -i cidr | grep \\\-\\\- - --allocate-node-cidrs=true - --cluster-cidr=10.96.0.0/22 - --node-cidr-mask-size=25 debian@master:~$ kubectl logs pod/kube-controller-manager-master -n kube-system E1015 08:35:32.193635 1 controller_utils.go:248] Error while processing Node Add: failed to allocate cidr from cluster cidr at idx:0: CIDR allocation failed; there are no remaining CIDRs left to allocate in the accepted range -
Did the manual change solve the issue?
-
@BenjiReis
No, the manual change didn't solve the problem
-
Did you make sure
/proc/sys/net/bridge/bridge-nf-call-iptablesis set to 1?Our implementation uses kube-router wich requirest this setting.
-
@BenjiReis said in Kubernetes Recipe - Basic setup not working:
/proc/sys/net/bridge/bridge-nf-call-iptables
Just checked:
debian@master:~$ more /proc/sys/net/bridge/bridge-nf-call-iptables 1 -
Ok thanks, then I don't understant why there's a pb unfortunately...
The recipe follow this doc to create the cluster: https://kubernetes.io/docs/setup/production-environment/tools/kubeadm/create-cluster-kubeadm/
@suaro how does your manual install differs from the doc used by the recipe? Perhaps we can dig there.
-
And the pod network is made with kube-router: https://github.com/cloudnativelabs/kube-router/blob/master/docs/kubeadm.md
-
I'm going to have a look into it!
Thanks and hopefully I'll find the cullpritt, so the recipe can be updated with some nice new ingrediënts
-
Thanks
I'll try to investigate myself as well when i can, do not hesitate to come back here if you find anything.
-
I got it working. Seems like the podCIDR wasn't set. Setting it manually by patching the nodes worked for me:
for node in master node-1 node-2 node-3 do kubectl patch node $node -p '{"spec":{"podCIDR":"10.96.0.0/12"}}' doneNot sure if this is a problem with the recipe, or if this is a bug in kube-router/kube-controller-manager. Anyway, If have my cluster up and running now!!!
-
It seems that Debian Buster has some problems with Kubernetes. While this base setup is working, one should also assure that every tool uses the legacy iptables. If not, pod's will not be able to reach the kubernetes api... And then... failure all over!
So we also need:update-alternatives --set iptables /usr/sbin/iptables-legacy update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy update-alternatives --set arptables /usr/sbin/arptables-legacy update-alternatives --set ebtables /usr/sbin/ebtables-legacy ```
