Nvidia Quadro P400 not working on Ubuntu server via GPU/PCIe passthrough

olivierlambert

How would you have hide this exactly? For Linux, the "best solution" for now is to get a modified Nvidia driver without the virt check. On Windows, it's already working since recent drivers (they removed the check)

TheFrisianClause

@xcp-ng-justgreat Unfortunately this did not work on Ubuntu 20.04.3 LTS ..... Even my recently bought Quadro M4000 won't work...

I am now getting this error:

[   50.123425] NVRM: GPU 0000:00:06.0: RmInitAdapter failed! (0x25:0x40:1250)
[   50.123475] NVRM: GPU 0000:00:06.0: rm_init_adapter failed, device minor number 0
[   51.102646] NVRM: GPU 0000:00:06.0: GPU has fallen off the bus.
[   51.304888] NVRM: A GPU crash dump has been created. If possible, please run
               NVRM: nvidia-bug-report.sh as root to collect this data before
               NVRM: the NVIDIA kernel module is unloaded.
[   51.507717] NVRM: GPU 0000:00:06.0: RmInitAdapter failed! (0x24:0xffff:1220)
[   51.507755] NVRM: GPU 0000:00:06.0: rm_init_adapter failed, device minor number 0

XCP-ng-JustGreat

@thefrisianclause Sorry to hear that. NVIDIA does jealously guard its secret sauce from the world. Altering the CPUID hypervisor bit falls within the realm of unnatural acts. While the technique has proven useful in other use cases and is a good thing to know about, it may be that countermeasures have been added to the GPU drivers to expose the lie. Hard to know . . .

TheFrisianClause

It is strange as I had it working this afternoon, on a different VM.... But shouldnt Quadro cards not have these particular issues (code 43), as they are 'Quadro'?

XCP-ng-JustGreat

@thefrisianclause That's a good point. However, it's not here http://hcl.xenserver.org/gpus/?gpusupport__version=20&vendor=50 so NVIDIA and Citrix have no obligation to support it for their commercial customers. If you do get it to work, it's by the grace of Vates and/or other XCP-ng users here. Best of luck!

TheFrisianClause

@olivierlambert @XCP-ng-JustGreat For some reason I got the M4000 working again in XCP-NG

Lets hope it does not leave me again

EDIT:
Well I tested something in a case of an emergency reboot where I rebooted the whole host, the card has fallen of the bus and nvidia-smi does not work anymore.

[   19.111279] NVRM: GPU 0000:00:05.0: RmInitAdapter failed! (0x25:0x40:1250)
[   19.111325] NVRM: GPU 0000:00:05.0: rm_init_adapter failed, device minor number 0
[   20.089528] NVRM: GPU 0000:00:05.0: GPU has fallen off the bus.
[   20.292170] NVRM: A GPU crash dump has been created. If possible, please run
               NVRM: nvidia-bug-report.sh as root to collect this data before
               NVRM: the NVIDIA kernel module is unloaded.
[   20.495046] NVRM: GPU 0000:00:05.0: RmInitAdapter failed! (0x24:0xffff:1220)
[   20.495093] NVRM: GPU 0000:00:05.0: rm_init_adapter failed, device minor number 0
[   21.468090] NVRM: GPU 0000:00:05.0: RmInitAdapter failed! (0x22:0x56:667)
[   21.468109] NVRM: GPU 0000:00:05.0: rm_init_adapter failed, device minor number 0
[   22.077205] NVRM: GPU 0000:00:05.0: RmInitAdapter failed! (0x22:0x56:667)
[   22.077257] NVRM: GPU 0000:00:05.0: rm_init_adapter failed, device minor number 0
[   22.686023] NVRM: GPU 0000:00:05.0: RmInitAdapter failed! (0x22:0x56:667)
[   22.686061] NVRM: GPU 0000:00:05.0: rm_init_adapter failed, device minor number 0
[   23.294321] NVRM: GPU 0000:00:05.0: RmInitAdapter failed! (0x22:0x56:667)
[   23.294381] NVRM: GPU 0000:00:05.0: rm_init_adapter failed, device minor number 0
[   24.479743] rfkill: input handler disabled
[   30.633389] NVRM: GPU 0000:00:05.0: RmInitAdapter failed! (0x22:0x56:667)
[   30.633444] NVRM: GPU 0000:00:05.0: rm_init_adapter failed, device minor number 0
[   31.242314] NVRM: GPU 0000:00:05.0: RmInitAdapter failed! (0x22:0x56:667)
[   31.242353] NVRM: GPU 0000:00:05.0: rm_init_adapter failed, device minor number 0

I believe this has nothing to do with code 43?

And it lets my whole XCP-NG host crash when trying to reboot the plex vm again...

So I assume the card works, but falls off the bus for some reason and I have no idea why?

EDIT 2:
Just reinstalled a new Ubuntu 21.10, and there it works as well.

Also after reboot of the Ubuntu 21.10, this keeps working:

but when I reboot the host itself, I get this:

And the GPU falls off the bus, resulting in this error:

[   24.428255] loop3: detected capacity change from 0 to 8
[   42.582836] NVRM: GPU 0000:00:06.0: RmInitAdapter failed! (0x25:0x40:1250)
[   42.582888] NVRM: GPU 0000:00:06.0: rm_init_adapter failed, device minor number 0
[   43.562201] NVRM: GPU 0000:00:06.0: GPU has fallen off the bus.
[   43.764639] NVRM: A GPU crash dump has been created. If possible, please run
               NVRM: nvidia-bug-report.sh as root to collect this data before
               NVRM: the NVIDIA kernel module is unloaded.
[   43.968873] NVRM: GPU 0000:00:06.0: RmInitAdapter failed! (0x24:0xffff:1220)
[   43.968930] NVRM: GPU 0000:00:06.0: rm_init_adapter failed, device minor number 0

So I believe something happens on the XCP-NG side in this matter?

EDIT 3:
Looking further in the logs I find this: [ 10.315135] [drm:nv_drm_load [nvidia_drm]] ERROR [nvidia-drm] [GPU ID 0x00000006] Failed to allocate NvKmsKapiDevice
[ 10.315943] [drm:nv_drm_probe_devices [nvidia_drm]] ERROR [nvidia-drm] [GPU ID 0x00000006] Failed to register device

EDIT 4: So sometimes it works and sometimes it doesnt, it goes very sporadically. So now I have the feeling that it could be an error on XCP-NG's side but I am not 100% sure. As the card itself works apparently, but I also have the feeling this could be an power consumption issue as I use an 2x Molex to 6 Pin PCI-E converter for this graphics card.

(Sorry for the long message)...

warriorcookie

@thefrisianclause Not all Quadro cards. Datacenter class cards will passthrough fine. Workstation cards do not on Linux guests. They will passthrough on windows guests as Nvidia removed the check in the driver.

warriorcookie

@xcp-ng-justgreat said in Nvidia Quadro P400 not working on Ubuntu server via GPU/PCIe passthrough:

@thefrisianclause Hello, not sure if I missed something from the above thread, but did any of you try to turn off the CPUID "hypervisor present" bit on an Intel-based XCP-ng host VM using this technique from the thread referenced by @warriorcookie above? https://xcp-ng.org/forum/topic/4643/nested-virtualization-of-windows-hyper-v-on-xcp-ng/26

It is the equivalent of the ESXi Hypervisor.CPUID.v0="FALSE" vmx file configuration tweak. It configures the XCP-ng VM to, in effect, lie to the guest OS by saying, "you are not running on a hypervisor."

Can you clarify? I thought this thread had been left as "close but no cigar"? Seems to have gotten the attention of some xen devs though...

TheFrisianClause

@warriorcookie I believe they still have a heavy heart when Linus told 'F You NVidia' Also I think the Quadro M4000 should not have any problems with passing through as this one uses other drivers than the Quadro P400 I also have. Otherwise all Quadro cards would be unusable with Xen and the Xen footprint would be a lot less I believe....

The Driver does seem te work as I sometimes get information from nvidia-smi (when freshly installed or on occasion).

The GPU on the other hand just falls off the bus for some strange reason (also see message above about this).

XCP-ng-JustGreat

@warriorcookie Your characterization is basically correct, but perhaps it should be "closer but no cigar." Masking the hypervisor's presence from the guest is required in all of the other hypervisors to successfully run a Windows guest with nested virtualization enabled. Prior to the discovery of the cited technique, nobody in the community knew how to do it on XenServer/XCP-ng using the xe API. However, the upstream Xen code itself and likely the guest drivers need more work in order for nested virtualization of a Windows guest to work reliably the way it does on ESXi, Hyper-V, etc. With the advent of Windows 11 and Server 2022, a virtualized TPM is also a required feature for full Windows compliance, so Xen has quite a bit on its "to do" list with respect to nested virtualization of Windows.

TheFrisianClause

Well I just installed Windows Server 2022 with the Quadro P400 and everything works fine now... So I believe for the time being I will keep Plex on Windows for now even if this has a larger footprint than Linux...

olivierlambert

Now you get Linus middle finger toward Nvidia on Linux

TheFrisianClause

@olivierlambert Haha yes yes and I thank him for it But I will be back on Linux once all of this has been resolved on Nvidia's side.

Atleast I can migrate everything to XCP-NG now, so I will be accessing the Xen Eco system

olivierlambert

Yeah at least it's better than nothing I would love NV to remove this limitation on Linux too

warriorcookie

yeah, closed source drivers on linux has always felt so.... dirty...

I'd use AMD if I could, but unfortunately I need NVENC and NVDEC.

olivierlambert

Yeah I know That's the issue when there's a greedy leader on a market.

TheFrisianClause

@olivierlambert But still if Nvidia has no plans on doing the same for Linux in what it did for Windows, how will XCP-NG/Xen project react to this? Will there be a possibility for a Kernel parameter for Xen to just 'hide' the hypervisor of some sort?

olivierlambert

It's not that easy sadly. It's not just a parameter, it's a modification needed to be done directly inside Xen. And after that, the guest won't be able to detect Xen (by definition), so say good bye to PV drivers too.

Maybe there's more elegant solutions, but after discussing with a core Xen dev, there's no "shortcut": this might take a decent amount of resources. I'm not sure it's big priority to us at the moment I'm afraid

TheFrisianClause

@olivierlambert Ahh thats a real bummer indeed... Lets hope Nvidia makes the same happen for Linux as it did for Windows, well actually they should otherwise they have a preference of OS so to speak

TheFrisianClause

I believe we have something here... In May 2022 Nvidia announced their open source Linux drivers.
As far as I can read, this is not much but a start.

I found this article: https://developer.nvidia.com/blog/nvidia-releases-open-source-gpu-kernel-modules/

Maybe this gives us (the consumer) and the XCP-NG team more opportunities to make more use of Nvidia GPU's?