Non-server CPU compatibility - Ryzen and Intel

olivierlambert

So it's likely an issue with your physical machine (buggy BIOS? thing not enabled?). I would start by the usual dmesg in the dom0, and also a xl dmesg.

mgales

Thanks @olivierlambert for going to those lengths to recreate the same steps that I had done.
It's good to know that the new generation of Ryzen processors and motherboards should work without issues for most.
I appreciate the time you spent - it's beyond what I expected.

I'll try your suggestions with dmesg, experiment with BIOS settings, and do the install to a regular hard drive for starters. I'm not familiar with dmesg, but I'll read up on that - looks like it could reveal boot issues.

It puzzles me why the only issues I'm having are with Linux VMs on my hardware, but hopefully I can figure out what's causing it. Forgot to mention that I had updated to the latest BIOS update from Asus before doing this install, but it didn't change the behavior from what I was experiencing prior to the update.

If I'm able to get it working, I'll post back here what helped.

Mike ( @mgales)

olivierlambert

Okay keep us posted Since it's work here, it's not obvious on what to do, because not reproducing a problem makes it harder to solve

mgales

BTW, here's the full model number of the motherboard (purchased as part of a combo CPU/RAM/MB package):
ROG STRIX B650E-F Gaming WIFI.
Product URL: https://rog.asus.com/motherboards/rog-strix/rog-strix-b650e-f-gaming-wifi-model/

scot1297

@olivierlambert I have a question for you on the AMD platform you have listed in this thread. I am looking at updating my current setup to a newer amd zen 4 cpu and motherboard. My question is are you able to pass through some of the usb ports from this motherboard or would I still need to use a dedicated pci USB device. I'm asking because currently I have a separate PCI USB device for pass through, but I am hopefull that in my next build I don't need to have a separate USB PCI slot taken and can just use the USB ports on the motherboard?

Thanks for any insight. I do know this is an edge case and most don't need the USB pass through like this, but I have a few USB devices I need to provide to a VM.

Quick Edit, I know you can do just a plan USB passthrough, but I am looking at the PCI level so that on host restarts I dont' have to redo USB passthrough each time. Because right now with my gpu and USB pci card on host restart I dont' have to re-pass through these devices.

Thanks,
Scot

olivierlambert

You can probably pass the entire USB controller (but then you won't be able to get any USB port used outside the passed-through VM)

mgales

@olivierlambert - I've got dmesg info captured that I can pass along. My friend also decided to build a new Zen 4 box for XCP-ng. He went with (what I think is) a similar motherboard to what you have? (PRIME B650M-A AX):
https://www.asus.com/us/motherboards-components/motherboards/prime/prime-b650m-a-ax/

The BIOS's are the same (ver 1222 - 2023/02/24), we loaded the same XCP-ng version (8.3alpha), the same xo-ce version (5.10.0-21-amd64), and the same Linux Mint version (21.1). Processors are similar Ryzen 9 7900 & 7900X. Both have Local APIC Mode set to X2APIC in the BIOS.

His box runs Linux Mint 21.1 without issues (as does yours). We captured dmesg output from all 3 (XCP-ng, xo-ce, Linux Mint 21.1 cinnamon) on both boxes and I've compared them side-by-side and each of the 3 have problems/errors on my machine. I summarized the differences/errors occurring on my box for 2 of the 3 dmesg captures below (XCP-ng and xo-ce).

I'm hoping that this might lead to some patches in XCP-ng software that will allow the Asus ROG STRIX B650E-F Gaming WIFI motherboard to fully work with XCP-ng. (XCP-ng works fine running Windows VMs, but not Linux VMs).

If a patch/fix from XCP-ng doesn't seem likely, then I'll probably replace the current motherboard with the PRIME version.

Below is a summary of what I've noticed in comparisons of XCP-ng dmesg files and xo-ce dmesg files.

In order of appearance, the differences I'm seeing in XCP-ng dmesg from my box are:

Hypervisor detected: Xen PV
tsc: Fast TSC calibration failed

Instead of:
tsc: Fast TSC calibration using PIT
no TSC line listed

Instead of:
tsc: Detected 3693.204 MHz TSC
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI BIOS Error (bug): Could not resolve [_SB.PCI0.GPP7.UP00.DP40.UP00.DP68], AE_NOT_FOUND (20180810/dswload2-160)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180810/psobject-221)
ACPI Error: Ignore error and continue table load (20180810/psobject-604)
ACPI Error: Skip parsing opcode OpcodeName unavailable (20180810/psloop-543)
ACPI: 14 ACPI AML tables successfully acquired and loaded

Instead of:
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 13 ACPI AML tables successfully acquired and loaded
This sequence happened:
[ 0.412184] usbcore: registered new device driver usb
[ 0.412184] WARNING: CPU: 0 PID: 1 at drivers/i2c/busses/i2c-designware-common.c:245 i2c_dw_clk_rate+0x16/0x30
[ 0.412184] Modules linked in:
[ 0.412184] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0+1 #1
[ 0.412184] Hardware name: ASUS System Product Name/ROG STRIX B650E-F GAMING WIFI, BIOS 0821 11/15/2022
[ 0.412184] RIP: e030:i2c_dw_clk_rate+0x16/0x30
[ 0.412184] Code: 00 48 c7 c6 5e ee e7 81 31 c0 5d e9 d4 60 f6 ff 0f 1f 40 00 0f 1f 44 00 00 48 8b 47 48 48 85 c0 74 08 e8 1d 35 43 00 89 c0 c3 <0f> 0b 0f 1f 84 00 00 00 00 00 c3 0f 1f 44 00 00 66 2e 0f 1f 84 00
[ 0.412184] RSP: e02b:ffffc9004006fcf8 EFLAGS: 00010246
[ 0.412184] RAX: 0000000000000000 RBX: ffff8881384d2018 RCX: 00000000aeffff00
INFO DELETED
[ 0.412184] ---[ end trace eae5bc73295d4325 ]---
[ 0.412941] pps_core: LinuxPPS API ver. 1 registered
[ 0.412941] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.412942] PTP clock support registered

Instead of:
[ 0.476402] usbcore: registered new device driver usb
[ 0.476402] pps_core: LinuxPPS API ver. 1 registered
[ 0.476402] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.476402] PTP clock support registered

In xo-ce dmesg on my box, I saw:
rcu_sched self-detected stall on CPU (2 occurrences)

Would it be useful for me to upload the 3 dmesg capture files from both boxes (i.e. XCP-ng, xo-ce, Linux Mint 21.1)?

olivierlambert

Well, a pretty buggy BIOS on your side doesn't help I suppose

BlueBadger

I built a system with a Ryzen 7950x on an ASRock B650M PG Riptide motherboard and was having similar issues as mgales. I switch to an ASUS Prime B650M-A II-CSM without any improvement.

With the ASUS Prime, there were no BIOS errors reported.
(I was able to get rid of 'ACPI BIOS Error (bug): Could not resolve [_SB.PCI0.GPP7.UP00.DP40.UP00.DP68], AE_NOT_FOUND (20180810/dswload2-160)' by enabling the onboard audio.)

I am able to run imported Windows VMs (Windows 10 and Server 2022) without any apparent issues.
I can run an imported AlmaLinux 8 VM with the nopv kernel option.
I can run the AlmaLinux 8 installer with the nopv option.
I can run Xen Orchestra with the nopv option.
I can also run an imported CentOS 6 VM without any additional options.

The main issue seems to be a stuck CPU on the Linux VMs when using PV drivers.

Could there be issues specific to Rzyen 7900x and 7950x?

olivierlambert

so it seems I need to purchase a 7900. I wonder if a non-X will do it

mgales

@olivierlambert - my friend with the Ryzen 7900 isn't experiencing the same issues that @BlueBadger and myself (with the 7900X) are having - his system is working fine (both of us are running xcp-ng-8.3.testing-2023.02.15-12.19-install.iso).

olivierlambert

With the same motherboard and the same BIOS settings/version?

mgales

His is closer to your board (I believe), and to one that @BlueBadger tried (ASUS Prime B650M-A II-CSM)

My friend's board is: ASUS Prime B650M-A AX:
https://www.asus.com/us/motherboards-components/motherboards/prime/prime-b650m-a-ax/

He's using the Ryzen 9 7900 and isn't experiencing any problems with Linux VMs in XCP-ng.

olivierlambert

An idea investigation would be to swap the X and non-X CPU and see if there's a diff.

I'm under the impression it's more a motherboard issue (BIOS, or version) than anything else however

mgales

I talked to my friend about doing a processor swap test, but he's happy with the way his system is running and doesn't want to take a chance of messing something up. Sorry about that

olivierlambert

Maybe there's others people in the community that could bring that info

BlueBadger

I ordered a Ryzen 7900 last night and got it this morning. (Thanks Amazon).
I just replaced the 7950x with the 7900 and things seem to work better.

I can run now a AlmaLinux 8 VM without the nopv flag.
I can now run Xen Orchestra without the nopv flag.

I will do some more testing.

mgales

@BlueBadger - Thank you! Looking forward to see what else you learn.

BlueBadger

I was having issues (download stalls) with the onboard 2.5Gb NIC (RTL8125) on the ASUS Prime B650M-A II-CSM motherboard even after I switched from the Ryzen 7950x to the 7900.
My setup also includes a X540 10Gb NIC which seemed to be working well.

I swapped the motherboard back to the ASRock B650M PG Riptide and was still having issues with the onboard 2.5Gb NIC.

I disabled the onboard NIC and installed a second X540 and have not have any network issues so far.

I'm guessing there might be an issue with the r8125 driver.

Excluding the onboard 2.5Gb NIC, XCP-ng seems to run well on both motherboards.

The BIOS errors in dmesg don't seem to be causing any issues.
(The ASRock B650M PG Riptide seems like a nicer motherboard.)

olivierlambert

That's… interesting So the "X" series seems to have some issues in the end? It's weird since it should be very different than it's non-X counterpart.