XCP-ng 8.3 betas and RCs feedback 🚀
-
@john-c
The system freezes and the last screenshots are above visible. -
@Ajmind-0 said in XCP-ng 8.3 betas and RCs feedback
:@john-c
The system freezes and the last screenshots are above visible.What's "IBA GE Slot 0100 v1371" it shows up as part of the boot menu load order, boot options from your EFI instance?
-
@john-c
PXE boot ROM for network boot. (Never used) -
@Ajmind-0 said in XCP-ng 8.3 betas and RCs feedback
:@john-c
PXE boot ROM for network boot. (Never used)So SanDisk HD is the portable drive used or is it something else?
-
@stormi
should have been and and not or.
so
and then update with iso 8.3 Of.
Had an old server that kept crashing during the 8.3 Of. installation. It worked with RC1 and then upgraded to 8.3 Of.
Sometime this old things are a bit tricky
-
Yes, Sandisk USB Stick (Ventoy) in UEFI boot mode. I had also created a standard DVD ROM in order to exclude any differences in such a boot construct.
-
@Ajmind-0 said in XCP-ng 8.3 betas and RCs feedback
:Yes, Sandisk USB Stick (Ventoy) in UEFI boot mode. I had also created a standard DVD ROM in ourder to exclude any differences in such a boot construct.
Did you verify that the checksums matched for the ISO you downloaded, before preparing the media?
The reason being any corruption in the downloaded image can affect the resulting media and their contents. So unexpected things can happen if the media or source media is corrupt, such as an in ability to complete the installation of OS software even at the final stage - boot manager installation.
-
the install process went fine in BIOS mode!
And yes, the checksum is correct. -
Hello,
Is it necessary to upgrade all hosts in the pool to manage VMs across the entire pool?
I receive the error "NOT_SUPPORTED_DURING_UPGRADE" when attempting to migrate vm and doing snapshots after upgraded a host to 8.3. -
@Robert You can migrate VMs from a host not upgraded yet to a host which was upgraded. Some other operations are not possible. A partially upgraded pool is supposed to the a short transitioning state.
-
@stormi Thanks for the response, probably was something wrong with that pool then, everything seemms to be working after upgraded all hosts to 8.3
