stormi said in XCP-ng 8.3 public alpha 
:
cocoon Did you enable Secure Boot on the VM, and did you also install SecureBoot certificates on your pool? (and if you installed the certificates to the pool after you first started the VM - with or without SB, you also need to install them to the VM by putting it in user mode:
varstore-sb-state user {VM-UUID}).
Ah yes, thanks, that works 
the command is just slightly different:
varstore-sb-state {VM-UUID} user
stormi That is my special build where I "fixed" the min version problem that now is in the other "official" client ^^
was here back when the previous relase had no working client for some time 
https://github.com/cocoon/xenadmin/releases
stormi I will add some details here:
This was my "hardcoded" value, that is not intended to be used here.
Instead the official way is to extend some Enums with supported API Versions.
If the Version of the host (for 8.3 it is 2.20) is not found in the enums, it get's set to 99 = Unknown.
The current enum contain only up to 2.16 (API_2_16) so API_2_20 is not found --> set to 99:
https://github.com/xcp-ng/xenadmin/blob/development/XenModel/XenAPI/ApiVersion.cs#L38
Problem is here where it compares the min version to the current and if it is higher (and it is with 99) it refuses to connect.
https://github.com/xcp-ng/xenadmin/blob/development/XenAdmin/MainWindow.cs#L928
As I hardcoded it to a lower value (20) it is now lower and allows to connect.
And btw: my build was based on a slightly newer commit from Citrix than the one at xcp-ng repo.
OK, TPM is visible in Windows Server 2022 but no secure boot atm.
Bios says it is disabled. Installed it in a virtual XCP-NG VM on ESXi.
Yes the key is 1024:
[11:45 xcp-ng-vm1 xensource]# openssl x509 -text -noout -in /etc/xensource/xapi-ssl.pem
Certificate:
Data:
Version: 3 (0x2)
Serial Number:
b2:32:6b:a9:eb:51:99:0c
Signature Algorithm: sha1WithRSAEncryption
Issuer: CN=192.168.56.102
Validity
Not Before: May 4 15:23:19 2018 GMT
Not After : May 1 15:23:19 2028 GMT
Subject: CN=192.168.56.102
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
Public-Key: (1024 bit)
Modulus:
00:c2:62:b4:fc:54:a0:1b:7c:5d:3e:61:4c:51:ef:
ff:a4:a0:da:ab:ea:49:f5:99:3e:14:67:a7:9d:68:
28:8e:ea:54:75:45:55:8b:78:fa:46:65:f5:f2:a2:
5e:ca:20:8c:c7:d4:4b:c4:21:a2:70:0e:49:d0:aa:
f0:2a:21:40:db:39:2f:57:ec:18:dc:82:2e:d0:b5:
f4:cb:48:a0:b8:9d:3f:c4:f5:75:cb:1b:1c:4b:47:
a2:07:2f:3c:b4:b1:37:d0:e8:11:e6:00:49:cf:89:
e6:4f:38:3d:a6:6f:bb:02:84:e8:17:3c:5b:a1:f7:
98:87:03:ad:36:26:31:ca:63
Exponent: 65537 (0x10001)
X509v3 extensions:
X509v3 Subject Alternative Name:
DNS:xcp-ng-vm1, DNS:xcp-ng-vm1
Signature Algorithm: sha1WithRSAEncryption
01:dc:44:77:3e:34:3a:b2:06:c5:bc:07:ab:e9:8c:c4:5e:cf:
c5:33:fc:74:83:cf:4c:14:cc:2f:fb:dc:d5:45:ff:84:76:40:
fc:b0:9c:00:af:a5:00:85:13:97:90:7e:66:81:36:3b:d3:83:
55:2c:e2:54:3d:85:d5:1d:d0:fe:1e:b7:2f:4d:76:8b:01:e1:
a5:be:ed:62:73:e0:44:65:74:6e:e3:eb:5b:72:21:66:7f:03:
28:c4:f7:d9:dc:72:46:d1:fc:b0:5f:18:bf:bd:ef:44:9c:64:
09:94:c8:65:1b:6b:06:26:ca:91:ee:ee:19:12:80:f0:f5:5f:
17:f4
I found a slightly different command to reset the cert and it seems to work:
[11:54 xcp-ng-vm1 xensource]# cat /etc/xensource-inventory | grep -i installation_uuid
INSTALLATION_UUID='efe93b3d-ce2e-4f37-8a0d-00abf186c688'
[11:54 xcp-ng-vm1 xensource]# xe host-refresh-server-certificate host uuid=efe93b3d-ce2e-4f37-8a0d-00abf186c688
Error: No matching hosts found
[11:55 xcp-ng-vm1 xensource]# xe host-list
uuid ( RO) : efe93b3d-ce2e-4f37-8a0d-00abf186c688
name-label ( RW): xcp-ng-vm1
name-description ( RW): Default install
[11:55 xcp-ng-vm1 xensource]# xe host-refresh-server-certificate host uuid='efe93b3d-ce2e-4f37-8a0d-00abf186c688'
Error: No matching hosts found
[11:55 xcp-ng-vm1 xensource]# xe host-emergency-reset-server-certificate
[11:56 xcp-ng-vm1 xensource]# openssl x509 -text -noout -in /etc/xensource/xapi-ssl.pem
Certificate:
Data:
Version: 3 (0x2)
Serial Number: 1652293449990601601 (0x16ee20237764fb81)
Signature Algorithm: sha256WithRSAEncryption
Issuer: CN=xcp-ng-vm1
Validity
Not Before: Nov 21 10:56:45 2022 GMT
Not After : Nov 18 10:56:45 2032 GMT
Subject: CN=xcp-ng-vm1
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
Public-Key: (2048 bit)
Modulus:
00:a4:4d:a0:35:42:cc:1b:0c:0c:1e:5e:68:84:9e:
a0:66:5e:9d:d0:e1:8a:9c:00:d8:e1:d9:be:81:6e:
f4:88:dd:ee:e3:ba:cf:19:01:74:05:f6:be:f0:b2:
7b:36:3d:99:b1:b8:79:52:10:dc:71:db:5c:4c:cd:
03:cc:2d:49:e9:3f:ab:31:5b:f1:f6:8e:33:99:b0:
ed:ee:a6:f8:af:f7:46:25:db:fc:2f:05:da:16:de:
58:df:c8:70:75:17:1f:a8:d9:ed:d9:31:da:f5:5e:
ce:d3:93:d1:00:b4:e8:27:29:cb:a6:a8:e6:e1:97:
92:84:74:84:30:b2:09:fc:e4:60:79:6c:4b:f4:07:
e3:ba:e6:da:b0:be:6a:35:ef:d8:bc:47:df:58:45:
a0:c6:1a:56:ee:2e:32:1c:13:17:66:5c:41:93:1d:
da:e2:ac:03:31:16:6d:0c:33:f4:df:67:47:8b:bb:
53:6f:cd:12:aa:aa:af:12:25:77:38:20:d5:88:97:
cf:35:b7:e2:cb:28:60:15:a8:9a:8f:69:ce:a1:f1:
4a:de:bf:6a:9e:f6:4a:fc:a4:1e:07:1c:21:db:c0:
db:3c:fb:31:5c:cf:4a:95:05:ca:ef:d1:4e:6e:a1:
dd:6b:c8:e2:9c:f4:f3:05:2e:b5:a1:bc:78:54:29:
df:35
Exponent: 65537 (0x10001)
X509v3 extensions:
X509v3 Subject Alternative Name:
DNS:xcp-ng-vm1, IP Address:192.168.220.106
Signature Algorithm: sha256WithRSAEncryption
23:bb:bf:fb:78:5e:df:7a:00:15:1a:09:d6:9c:81:b3:ef:e2:
a3:a1:6c:18:5f:fe:dd:77:ae:99:48:92:d7:b6:76:c7:93:2f:
40:c3:43:a0:9f:ae:eb:b0:68:56:f0:65:04:29:49:01:b6:c7:
96:42:85:70:29:d0:cb:bc:21:26:55:5a:9e:af:97:4b:4a:19:
ad:5d:07:39:e3:e4:e5:6b:4b:2a:f3:7d:de:e5:8f:ea:3a:34:
0b:5e:6a:06:c4:34:d6:e8:5a:12:70:14:2f:95:12:66:da:79:
d0:10:43:e9:9d:75:68:e9:aa:56:ae:fe:49:2b:79:b9:f8:16:
be:7a:86:ff:b5:b4:84:14:cb:d1:91:ca:4d:95:36:91:43:1e:
1e:50:a6:70:93:77:1c:2e:bb:ee:5f:33:5e:c7:f2:98:2a:b4:
9d:40:a8:a8:ae:22:71:11:50:f4:62:ff:72:3f:9d:c6:0c:6a:
7e:34:c8:c1:f9:8f:5c:ac:fa:9b:bf:8b:e7:6b:92:9a:00:dc:
59:6d:15:23:af:28:c7:b5:b6:0a:a3:d5:98:86:9f:b2:31:1a:
29:16:ca:60:b2:a8:1e:68:b2:14:37:e6:f0:6c:cd:2b:43:d0:
18:6a:c0:43:70:ee:8b:c3:b2:fc:15:6c:a4:e7:c2:12:20:41:
ed:e6:23:60
Congratulations for your new release!
I am very interested in new features, still waiting for raw storage devices, new xo and hopefully the job where I could revert a VM always to its latest snapshot ^^
I had short time today to try an Upgrade of an old VM (could have still been 7.6 in Virtualbox) and the installation went OK.
But no https available. Quickly checked on the host with netstat, only :80 was used.
Had not much time today, but found out port 443 might be planned to be used by stunnel, I tried to manually run stunnel with the config in etc, but got an error about a too short key or something.
I will do a fresh installation next to it in a new vm and compare and troubleshoot tomorrow if possible.
Congratulations to everyone, impressive work!
I didn't expect ZFS and Ceph support so soon, nice! 
I can already confirm that I could trigger 2 Jobs manually in XO and it run successfully.
Thanks!
The scheduled ones I will see tomorrow and report if it would fail, but it is not expected.
I would just add a wish here:
Would be great for future (of course best tomorrow) to have all the features from VMware vCloud Director regarding Template vApps + API 
Just a short compact list:
...
moussa854
And after adding it you might need some more prep? I have had no time to try more:
https://xcp-ng.org/forum/topic/6578/xcp-ng-8-3-public-alpha/121?_=1687790268385
mortenchristensn
You can follow exactly every changes between the two versions if you compare the commits:
https://github.com/xcp-ng/xenadmin/commits/v20.04.01.33
https://github.com/cocoon/xenadmin/commits/20.11.00.3
One bigger difference is, that v20.11.00.3 is based on a newer XenCenter codebase than v20.04.01.33.
v20.11.00.3: Nov 17, 2020
v20.04.01.33: Mar 10, 2020
So you can check all the single changes that happened between those dates.
Hi,
just something small that I recognized when I read the text about what XOA is for and it does only mention Citrix Hypervisor but not XCP-NG in the text, just in the title here:
https://xen-orchestra.com/#!/xo-features/webinterface
Xen Orchestra is designed to give you the tools you need to administrate your Citrix Hypervisor (XenServer) pools and enjoy a complete overview of your whole infrastructure. No agent to install on your hosts, you can access everything from anywhere and from any devices.
Maybe you want to mention XCP-NG there with a link to "xcp-ng.org".
stormi That was my plan, Bitlocker feature is already installed, will test this yes
stormi said in XCP-ng 8.3 public alpha :
cocoon Did you enable Secure Boot on the VM, and did you also install SecureBoot certificates on your pool? (and if you installed the certificates to the pool after you first started the VM - with or without SB, you also need to install them to the VM by putting it in user mode:
varstore-sb-state user {VM-UUID}).
Ah yes, thanks, that works
the command is just slightly different:
varstore-sb-state {VM-UUID} user
OK, TPM is visible in Windows Server 2022 but no secure boot atm.
Bios says it is disabled. Installed it in a virtual XCP-NG VM on ESXi.
stormi Hi, sounds great 
I tried to use the vTPM Management and it seems for me that I am either missing updates (but I have even testing repo enabled) or the feature daemon is missing this entry:
restrict_vtpm
When I try to manage vTPM it generates this error on the server:
Raised Server_error(FEATURE_RESTRICTED, [ restrict_vtpm ])
Last added online I see Cloud:
https://github.com/xcp-ng/xcp-featured/blob/master/bin/v6_server.ml#L68
Would be great to be able to configure it somehow, even add custom features in a config file, there already exists an similar issue entry for it:
https://github.com/xcp-ng/xcp/issues/184
./var/log/xensource.log:Jan 9 16:13:55 xcp-ng-vm5 xapi: [error||1247 :::80|dispatch:VTPM.create D:6eb04e1f3871|backtrace] 1/9 xapi Raised at file ocaml/xapi/xapi_vtpm.ml, line 24
Oh I see, you don't plan to add more system near features?
All is just around xapi, even the login system. I thougt it would be more like on ESXi systems where you can manage the whole server from a web ui and will get features like the ones you can do from the local console screen.
