Posts made by decromin

@olivierlambert ahh perfect thanks!

@olivierlambert sure can do - I have a number of xcp-ng hosts on the subnet that the XOA VM is running on, but I also have hosts that exist on a completely different subnet that I would like the appliance to connect to as well. I can create VM's on the same host with connectivity to either or both subnets, but the appliance only has access to the one subnet it was originally setup on. I'll see if I can draw this out

• Subnet 1: 192.168.10.0/24
  5 xcp-ng hosts, XOA instance

• Subnet 2: 10.0.55.128/27
  2 xcp-ng hosts

From the host that XOA is running on, I can assign interfaces for each subnet, but there is no routing between the subnets, so I have to use dedicated interfaces.

What I'd like to do is to have two interfaces on the XOA instance, one with a 192,.168.10.0 address, and one with a 10.0.55.128 address, and for XOA to use standard routing rules to connect to the xcp-ng hosts one both subnets. I can create a new interface on the XOA instance, but I cannot find how to give it an IP address.

Re: XOA additional network interface

Going on this past topic, is there any info on adding additional networks to an XOA instance? I've got hosts on multiple VLAN's accessible from the xcp-ng instance running XOA, but I can't find any info on configuring these secondary interfaces in the doco (or I'm going mad and I'm simply missing it!)