I am using a translator because my English is limited. I have 5 identical servers equipped with Adaptec 6805 controllers. Previously, I bypassed the controller issues by using an alternative kernel, but that triggered network problems—specifically, network bonding is unstable on the alt-kernel.I have tested your evaluation image, but unfortunately, it did not resolve the issue. Later today, after my work shift, I will provide the logs and output from dmesg.I am ready to fully cooperate to fix this and can even arrange remote access via IPMI if needed.
N
Offline
-
RE: XCP-ng 8.3 No Longer Compatible with Older Adaptec RAID Card?
-
RE: XCP-ng 8.3 No Longer Compatible with Older Adaptec RAID Card?
@poddingue
Hello, sorry for the delayed response. We had some issues with the Supermicro IPMI and were waiting for a resolution. Here are the two log files:dmesg_xcp-ng-8320250606-aacraid-legacy.log dmesg_xcp-ng-8320250606-aacraid-uefi.logThe alternative kernel did not work with your xcp-ng-8.3.0-20250606-aacraid.iso.
I am also providing the log after installing the standard xcp-ng-8.3.0-20250606.iso:
The files can be found at https://drive.google.com/drive/folders/1H-0FEruGK26oclD2WInDSOBJhVW2k8Xz?usp=sharing, as I wasn't able to upload the log files directly to the forum.
I am also ready to participate in any further testing of new images, up to and including XCP-ng 9.0.
-
RE: XCP-ng 8.3 No Longer Compatible with Older Adaptec RAID Card?
I am using a translator because my English is limited. I have 5 identical servers equipped with Adaptec 6805 controllers. Previously, I bypassed the controller issues by using an alternative kernel, but that triggered network problems—specifically, network bonding is unstable on the alt-kernel.I have tested your evaluation image, but unfortunately, it did not resolve the issue. Later today, after my work shift, I will provide the logs and output from dmesg.I am ready to fully cooperate to fix this and can even arrange remote access via IPMI if needed.