Posts made by Soarin

@olivierlambert It wasn't but I had reinstalled it just now and this is the output:

It seems to changed the memory to dynamic on the XO Web but no icon still on the panel

@olivierlambert I did ./install.sh -d sles -m 14 and it installed but didn't report back to the panel

@olivierlambert said in NFS Mount BackupNG Permission Denied:

Are you in XOA?

No sir

Hello!

My NFS mount for my backup-NG remote connection doesn't seem to work at all,
EACCES: permission denied, open '/run/xo-server/mounts/1729304b-0f11-49f9-8712-f34fa151b859/.keeper_0bz7ymi898nf'

I keep getting this error. I've tried going between NFS V3 and V4, allowing non-root access, and there's no Kerberos setup. It's a mostly stock FreeNAS NFS server!

I've also gone into my Xen Orchestra VM and unmounted that then tried to reconnect it, even after making a new NFS share all together! Any help would be appreciated, thank you

@stormi

@stormi said in XCP Guest Tools SUSE Linux:

Actually openSUSE is supported by the installer script so the standard method should work.

Hi, I tried that and I get this error:

@stormi said in XCP Guest Tools SUSE Linux:

Actually openSUSE is supported by the installer script so the standard method should work.

I'm using openSUSE Leap instead of SUSE Enterprise Linux which works with the installer, but after getting SLES Xen tools it still reports I have no tools and no icon shows up on my VM list.

xo-server 5.50.0
Xen Orchestra server
xo-web 5.50.0
Xen Orchestra web client

Thank you both so far for the help

Hello! I was wondering if there's a way to get my openSUSE Leap server to install XCP Guest tools. I couldn't find anything on this with DuckDuckGo or this forums.

Thank you

The updater I used output everything as it was happening and it showed it did, by cleaning everything does that mean deleting a certain folder before rebuilding? Thank you for your time so far

I'm on the master branch and latest version, I used an installer from Jarli01 which also has an updater that downloads and compiles from the official Github. I just updated it a few minutes ago just to make sure and rebuilt it and still same error.

I tested it on another browser and same problem occurred, is v5.43.0 the latest version or should I try a different branch? Thank you

Hello! I'm on Xen Orchestra Community Edition (v5.43.0) + Debian 9.0 and I'm also on Linux right now so I can't access the XCP-NG center to create VMs through that, I try to make them through Xen Orchestra and I've noticed I get a pretty big error:

vm.create
{
  "clone": true,
  "existingDisks": {},
  "installation": {
    "method": "cdrom",
    "repository": "1267344e-acb5-4bb0-8f45-858170317ad8"
  },
  "name_label": "Discourse",
  "template": "OpaqueRef:2e9e7fa9-7414-4b47-9f83-4f2a17d59cae",
  "VDIs": [
    {
      "bootable": true,
      "device": "0",
      "size": 10737418240,
      "type": "system",
      "SR": "b8e40431-4dea-7cc9-f432-be02bfd56c22",
      "name_description": "Created by XO",
      "name_label": "Debian_Discourse"
    }
  ],
  "VIFs": [
    {
      "network": "32da8332-3eb4-9a8a-c80f-4d08d0a8a33c",
      "allowedIpv4Addresses": [],
      "allowedIpv6Addresses": []
    }
  ],
  "CPUs": 1,
  "cpuWeight": null,
  "cpuCap": null,
  "name_description": "Howdy",
  "memoryMax": 536870912,
  "bootAfterCreate": true,
  "share": false,
  "tags": []
}
{
  "code": 10,
  "data": {
    "errors": [
      {
        "code": null,
        "reason": "strict",
        "message": "should not contains properties [\"CPUs\", \"cpuWeight\", \"cpuCap\", \"memoryMax\", \"tags\"]",
        "property": "@"
      }
    ]
  },
  "message": "invalid parameters",
  "name": "XoError",
  "stack": "XoError: invalid parameters
    at Object.factory [as invalidParameters] (/opt/xen-orchestra/packages/xo-common/src/api-errors.js:21:31)
    at Xo.checkParams (/opt/xen-orchestra/packages/xo-server/src/xo-mixins/api.js:71:17)
    at /opt/xen-orchestra/packages/xo-server/src/xo-mixins/api.js:277:18
    at Generator.next (<anonymous>)
    at asyncGeneratorStep (/opt/xen-orchestra/packages/xo-server/dist/xo-mixins/api.js:38:103)
    at _next (/opt/xen-orchestra/packages/xo-server/dist/xo-mixins/api.js:40:194)
    at tryCatcher (/opt/xen-orchestra/node_modules/bluebird/js/release/util.js:16:23)
    at Promise._settlePromiseFromHandler (/opt/xen-orchestra/node_modules/bluebird/js/release/promise.js:517:31)
    at Promise._settlePromise (/opt/xen-orchestra/node_modules/bluebird/js/release/promise.js:574:18)
    at Promise._settlePromiseCtx (/opt/xen-orchestra/node_modules/bluebird/js/release/promise.js:611:10)
    at _drainQueueStep (/opt/xen-orchestra/node_modules/bluebird/js/release/async.js:142:12)
    at _drainQueue (/opt/xen-orchestra/node_modules/bluebird/js/release/async.js:131:9)
    at Async._drainQueues (/opt/xen-orchestra/node_modules/bluebird/js/release/async.js:147:5)
    at Immediate.Async.drainQueues (/opt/xen-orchestra/node_modules/bluebird/js/release/async.js:17:14)
    at runCallback (timers.js:810:20)
    at tryOnImmediate (timers.js:768:5)
    at processImmediate [as _immediateCallback] (timers.js:745:5)"
} 

I'm not sure if I'm just doing something wrong but everything looks to be filled out correctly when I'm creating the VM! Thank you

@olivierlambert Got it connected via the VPN and it works flawlessly now

@olivierlambert I'd love that proxy idea, but right now setting up a site-to-site OpenVPN setup right now. Thank you for the quick replies as always!

@olivierlambert I see, thank you for the clarification. Already setting up a site-to-site for this, would that work?

Hello! I connected my friend's laptop XCP-NG up to my XenOrchestra so we can control his VMs remotely, I opened port 443 to his XCP-NG which allowed me to connect the server to my XO but I've noticed we can't see the console. Is there another port to be opened for the console to be streamed?

Thank you!

@julien-f Thank you! I'll get that after the XOA Premium expires!

@olivierlambert That's exactly what I've done, very impressed. I'm moving some servers over now to see how they react to Xen and so far so good. Thank you for the help

@borzel Thank you for that suggestion, I'll try that out once the XOA premium expires and if master branch still isn't working for me.

Alrighty, thank you for the quick response! I'll wait, I haven't migrated from Proxmox yet so I should be fine until then.

Does this problem exist on the XOA currently too? Thank you Just read your quote, apologies

Hi! I've installed XenOrchestra from source more than once, I initially used a Github script I found online from a video made by LawrenceSystems. I noticed that it'd work great, but if I refresh the page then XenOrchestra no longer thinks it's connected to XCP-NG, I'll go to the servers tab and it'll say connected, but I have to disconnect it and reconnect it for it to show all my VMs again.

I've tested this on Ubuntu 16.04 Server and Ubuntu 18.04 Server, just now I've built it from source without any scripts and followed the guide on the wiki. It ended up the same, is this a bug with the current version or is there something I'm doing wrong? Thank you

The error I get is:

Jun 09 09:28:22 xoserve xo-server[810]: 2019-06-09T09:28:22.852Z - xo:main - [INFO] + WebSocket connection (::ffff:192.168.1.29)
Jun 09 09:28:23 xoserve xo-server[810]: 2019-06-09T09:28:23.129Z - xo:api - [WARN] admin@admin.net | xo.getAllObjects(...) [19ms] =!> XoError: invalid parameters
Jun 09 09:30:31 xoserve xo-server[810]: 2019-06-09T09:30:31.219Z - xo:main - [INFO] - WebSocket connection (::ffff:192.168.1.29)
Jun 09 09:30:32 xoserve xo-server[810]: 2019-06-09T09:30:32.249Z - xo:main - [INFO] + WebSocket connection (::ffff:192.168.1.29)
Jun 09 09:30:32 xoserve xo-server[810]: 2019-06-09T09:30:32.426Z - xo:api - [WARN] admin@admin.net | xo.getAllObjects(...) [1ms] =!> XoError: invalid parameters
Jun 09 09:30:33 xoserve xo-server[810]: 2019-06-09T09:30:33.458Z - xo:main - [INFO] - WebSocket connection (::ffff:192.168.1.29)
Jun 09 09:30:34 xoserve xo-server[810]: 2019-06-09T09:30:34.586Z - xo:main - [INFO] + WebSocket connection (::ffff:192.168.1.29)
Jun 09 09:30:34 xoserve xo-server[810]: 2019-06-09T09:30:34.751Z - xo:api - [WARN] admin@admin.net | xo.getAllObjects(...) [2ms] =!> XoError: invalid parameters
Jun 09 09:31:22 xoserve xo-server[810]: 2019-06-09T09:31:22.071Z - xo:main - [INFO] + WebSocket connection (::ffff:192.168.1.29)
Jun 09 09:31:22 xoserve xo-server[810]: 2019-06-09T09:31:22.353Z - xo:api - [WARN] admin@admin.net | xo.getAllObjects(...) [3ms] =!> XoError: invalid parameters

I'd really like to use XenOrchestra with all the features source has but this problem isn't letting me use it other than to browse the interface. I can't create VMs, made a user account and they can't make the self service VM they have access to, and here's the error for that which I suspect is related:

Jun 09 09:41:41 xoserve xo-server[810]: 2019-06-09T09:41:41.875Z - xo:api - [WARN] soarin | xo.getAllObjects(...) [2ms] =!> XoError: invalid parameters
Jun 09 09:42:07 xoserve xo-server[810]: 2019-06-09T09:42:07.016Z - xo:main - [INFO] - WebSocket connection (::ffff:192.168.1.29)
Jun 09 09:42:07 xoserve xo-server[810]: 2019-06-09T09:42:07.104Z - xo:main - [INFO] + WebSocket connection (::ffff:192.168.1.29)
Jun 09 09:42:07 xoserve xo-server[810]: 2019-06-09T09:42:07.131Z - xo:main - [INFO] - WebSocket connection (::ffff:192.168.1.29)
Jun 09 09:42:08 xoserve xo-server[810]: 2019-06-09T09:42:08.554Z - xo:main - [INFO] + WebSocket connection (::ffff:192.168.1.29)
Jun 09 09:42:08 xoserve xo-server[810]: 2019-06-09T09:42:08.651Z - xo:api - [WARN] soarin | xo.getAllObjects(...) [2ms] =!> XoError: invalid parameters
Jun 09 09:43:25 xoserve xo-server[810]: 2019-06-09T09:43:25.256Z - xo:api - [WARN] soarin | vm.create(...) [4ms] =!> XoError: invalid parameters

I don't see anything in tasks -> logs either, I hope this can be resolved. I hope to be able to use the source build so I can get the features I'd like since I'm just a home user and offering servers to friends. Thank you