Windows 10 VM crashes (N5105)
-
Hi,
Without more information, it's hard to assist… What XCP-ng version are you using? Is it fully up to date? Are you using nested mode?
-
@olivierlambert xo-server 5.102.0 patched. Not nested.
-
XCP-ng, not Xen Orchestra
-
@olivierlambert XCP-ng Host 8.2.1
-
Do you have BIOS access? I would double check you have various options enabled (I don't remember exactly which ones, also this bug rings a bell but I can't find exactly what
) -
@olivierlambert I'll have a run through the bios shortly. I recall enabling all the virtualization settings etc. everything else seems to be running smoothly.
my hunch is it is graphics related and BlueIris is probing for graphic accelerator hardware. I cant find a way to disable this behavior to test my theory though.
Something similar was reported on proxmox, the solution was to set the following option, but I don't see an equivalent. For XCP-NG.
echo "options kvm ignore_msrs=1" > /etc/modprobe.d/kvm.conf
-
It's weird since we patched those recents CPUs for this bug: https://github.com/xcp-ng/xcp/issues/434
Could it be something else?
-
@olivierlambert okay, I just remembered, I had trouble installing too ..... The install was black screening after relinquish VGA.
After some reading around I happened upon :
"Custom XCP-ng 8.2.1 install ISO with Xen 64bit VGA Dom0 kernel fix (NUC11) and new ethernet drivers (NUC10/NUC11):" from here :
https://users.ntplx.net/~andrew/xcp/
This is how I got up and running.
I'm way out of my depth here, but this feels like it might be the crux of the matter.
-
Can you create an issue on https://github.com/xcp-ng/xcp?
-
@olivierlambert sure , will give it a go.
-
