-
@ronan-a said in XOSTOR hyperconvergence preview:
@Maelstrom96 We must update our documentation for that, This will probably require executing commands manually during an upgrade.
Any news on that? We're still pretty much blocked until that's figured out.
Also, any news on when it will be officially released?
-
I have a 3 node cluster in my lab running 8.2.1 with thin provisioned LVM on SATA SSDs.
I changed the 10G management interfaces from being untagged to being being VLAN tagged and I did an emergency network reset following the changeover.
Each node only has one 10G interface which is used for all management, vm and storage traffic.Following the network reset, the cluster did not automatically recover, so I restarted my three nodes.
Now the cluster is up and the nodes claim to be connected to the XOSTOR SR, but I cannot take snapshots, clone VMs, and some VMs fail to start with the following error:
SR_BACKEND_FAILURE_1200(, Empty dev path for 19f26a13-a09e-4c38-8219-b0b6b2d4dc26, but definition "seems" to exist, )Any troubleshooting guidance is appreciated. Thanks in advance.
[edit1]
I am only able to run linstor commands such as 'linstor node list' on the node that is currently the linstor controller.If I try linstor node list (or any linstor command) on the satellite nodes, i get the error:
Error: Unable to connect to linstor://localhost:3370: [Errno 99] Cannot assign requested addresslinstor node interface list host1 gives me
host2 | NetInterface | IP | Port | EncryptionType + StltCon | default | 10.10.10.11 | 3366 | PLAINI am able to use 'linstor-kv-tool' to find the linstor volume that maps to each of my virtual disk images, but only on the controller.
linstor-controller.service is running on host 2
linstror-satellite.service is running on hosts 0 and 1, but i don't see any process listening on 3366 from netstat -tulpn
[/edit1] -
@limezest Are you sure that you only have one linstor controller running?
What's the output oflinstor resource list? Same formountpoint /var/lib/linstoron each host.Note: it's not a surprise to have this error:
Cannot assign requested address.
You must specifylinstor --controllers=<ips> <cmd>to execute a command from any host. -
@Maelstrom96 The XCP-ng 8.3 LINSTOR version is not often updated, and we are totally focused on the stable 8.2 version.
As a reminder XCP-ng 8.3 is still in beta, so we can't write now a documentation to update LINSTOR between these versions because we still have important issues to fix and improvements to add that can impact and/or invalidate a migration process. -
@ronan-a Thanks for the reply.
Node2 is currently the controller. All three nodes are currently running the satellite and monitor service.
On nodes 0 and 1 (the satellite nodes) I see:
/var/lib/linstor is not a mountpointOn node 2, the current controller node, I see:
/var/lib/linstor is a mountpointCurrently, some VDI are accessible, others are not.
For example, when i try to start my XOA VM I get the following error. I get the same error no matter which node i try to start the VM on:
XOSTOR: POST_ATTACH_SCAN_FAILED","2","Failed to scan SR 7c0374c1-17d4-a52b-7c2a-a5ca74e1db66 after attaching, error The SR is not available [opterr=Database is not mounted]There is no entry for this UUID beginning in 7c03 in the output of the linstor-kv-tool
~~node0~~ [11:44 node0 ~]# systemctl status linstor* ● linstor-monitor.service - LINSTOR Monitor Loaded: loaded (/usr/lib/systemd/system/linstor-monitor.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2023-11-15 22:07:50 EST; 13h ago Main PID: 1867 (linstor-monitor) CGroup: /system.slice/linstor-monitor.service └─1867 /opt/xensource/libexec/linstor-monitord ● linstor-satellite.service - LINSTOR Satellite Service Loaded: loaded (/usr/lib/systemd/system/linstor-satellite.service; enabled; vendor preset: disabled) Drop-In: /etc/systemd/system/linstor-satellite.service.d └─override.conf Active: active (running) since Wed 2023-11-15 22:07:59 EST; 13h ago Main PID: 4786 (java) CGroup: /system.slice/linstor-satellite.service ├─4786 /usr/lib/jvm/jre-11/bin/java -Xms32M -classpath /usr/share/linstor-server/lib/conf:/usr/share/linstor-server/lib/* com.linbit.linstor.core.Satellite --logs=/var/log/linstor-satellite --config-directory... ├─5342 drbdsetup events2 all └─6331 /usr/sbin/dmeventd ~~node1~~ [11:44 node1 ~]# systemctl status linstor* ● linstor-satellite.service - LINSTOR Satellite Service Loaded: loaded (/usr/lib/systemd/system/linstor-satellite.service; enabled; vendor preset: disabled) Drop-In: /etc/systemd/system/linstor-satellite.service.d └─override.conf Active: active (running) since Wed 2023-11-15 15:59:10 EST; 19h ago Main PID: 5035 (java) CGroup: /system.slice/linstor-satellite.service ├─5035 /usr/lib/jvm/jre-11/bin/java -Xms32M -classpath /usr/share/linstor-server/lib/conf:/usr/share/linstor-server/lib/* com.linbit.linstor.core.Satellite --logs=/var/log/linstor-satellite --config-directory... └─5585 drbdsetup events2 all ● linstor-monitor.service - LINSTOR Monitor Loaded: loaded (/usr/lib/systemd/system/linstor-monitor.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2023-11-15 15:57:35 EST; 19h ago Main PID: 1825 (linstor-monitor) CGroup: /system.slice/linstor-monitor.service └─1825 /opt/xensource/libexec/linstor-monitord ~~node2~~ [11:38 node2 ~]# systemctl status linstor* ● linstor-satellite.service - LINSTOR Satellite Service Loaded: loaded (/usr/lib/systemd/system/linstor-satellite.service; enabled; vendor preset: disabled) Drop-In: /etc/systemd/system/linstor-satellite.service.d └─override.conf Active: active (running) since Wed 2023-11-15 15:49:43 EST; 19h ago Main PID: 5212 (java) CGroup: /system.slice/linstor-satellite.service ├─5212 /usr/lib/jvm/jre-11/bin/java -Xms32M -classpath /usr/share/linstor-server/lib/conf:/usr/share/linstor-server/lib/* com.linbit.linstor.core.Satellite --logs=/var/log/linstor-satellite --config-directory... └─5439 drbdsetup events2 all ● linstor-monitor.service - LINSTOR Monitor Loaded: loaded (/usr/lib/systemd/system/linstor-monitor.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2023-11-15 15:48:11 EST; 19h ago Main PID: 1830 (linstor-monitor) CGroup: /system.slice/linstor-monitor.service └─1830 /opt/xensource/libexec/linstor-monitord ● linstor-controller.service - drbd-reactor controlled linstor-controller Loaded: loaded (/usr/lib/systemd/system/linstor-controller.service; disabled; vendor preset: disabled) Drop-In: /run/systemd/system/linstor-controller.service.d └─reactor.conf Active: active (running) since Wed 2023-11-15 22:04:11 EST; 13h ago Main PID: 1512 (java) CGroup: /system.slice/linstor-controller.service └─1512 /usr/lib/jvm/jre-11/bin/java -Xms32M -classpath /usr/share/linstor-server/lib/conf:/usr/share/linstor-server/lib/* com.linbit.linstor.core.Controller --logs=/var/log/linstor-controller --config-directo...[11:37 node2 ~]# linstor resource list ╭────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╮ ┊ ResourceName ┊ Node ┊ Port ┊ Usage ┊ Conns ┊ State ┊ CreatedOn ┊ ╞════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╡ ┊ xcp-persistent-database ┊ node0 ┊ 7000 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-08-30 13:53:54 ┊ ┊ xcp-persistent-database ┊ node1 ┊ 7000 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-08-30 13:53:49 ┊ ┊ xcp-persistent-database ┊ node2 ┊ 7000 ┊ InUse ┊ Ok ┊ UpToDate ┊ 2023-08-30 13:53:54 ┊ ┊ xcp-volume-00345120-0b6c-4ebd-abf9-96722640e5cd ┊ node0 ┊ 7004 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-09-05 14:53:24 ┊ ┊ xcp-volume-00345120-0b6c-4ebd-abf9-96722640e5cd ┊ node1 ┊ 7004 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 14:53:27 ┊ ┊ xcp-volume-00345120-0b6c-4ebd-abf9-96722640e5cd ┊ node2 ┊ 7004 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 14:53:27 ┊ ┊ xcp-volume-0877abd7-5665-4c00-8d16-1f13603c7328 ┊ node0 ┊ 7012 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-09-05 16:13:15 ┊ ┊ xcp-volume-0877abd7-5665-4c00-8d16-1f13603c7328 ┊ node1 ┊ 7012 ┊ InUse ┊ Ok ┊ UpToDate ┊ 2023-09-05 16:13:20 ┊ ┊ xcp-volume-0877abd7-5665-4c00-8d16-1f13603c7328 ┊ node2 ┊ 7012 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 16:13:20 ┊ ┊ xcp-volume-14f1acb1-1b8f-4bc6-8a42-7e5047807d07 ┊ node0 ┊ 7005 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-09-05 14:53:31 ┊ ┊ xcp-volume-14f1acb1-1b8f-4bc6-8a42-7e5047807d07 ┊ node1 ┊ 7005 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 14:53:35 ┊ ┊ xcp-volume-14f1acb1-1b8f-4bc6-8a42-7e5047807d07 ┊ node2 ┊ 7005 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 14:53:35 ┊ ┊ xcp-volume-1e2dd480-a505-46fc-a6e8-ac8d4341a213 ┊ node0 ┊ 7022 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-11-14 13:00:37 ┊ ┊ xcp-volume-1e2dd480-a505-46fc-a6e8-ac8d4341a213 ┊ node1 ┊ 7022 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-11-14 13:00:37 ┊ ┊ xcp-volume-1e2dd480-a505-46fc-a6e8-ac8d4341a213 ┊ node2 ┊ 7022 ┊ Unused ┊ Ok ┊ TieBreaker ┊ 2023-11-14 13:00:33 ┊ ┊ xcp-volume-295d43ed-f520-4752-8e65-6118f608a097 ┊ node0 ┊ 7009 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-09-05 15:28:56 ┊ ┊ xcp-volume-295d43ed-f520-4752-8e65-6118f608a097 ┊ node1 ┊ 7009 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 15:29:00 ┊ ┊ xcp-volume-295d43ed-f520-4752-8e65-6118f608a097 ┊ node2 ┊ 7009 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 15:29:00 ┊ ┊ xcp-volume-2bd88964-3feb-401a-afc1-c88c790cc206 ┊ node0 ┊ 7017 ┊ Unused ┊ Connecting(node1) ┊ UpToDate ┊ 2023-09-07 22:28:26 ┊ ┊ xcp-volume-2bd88964-3feb-401a-afc1-c88c790cc206 ┊ node1 ┊ 7017 ┊ ┊ ┊ Unknown ┊ 2023-09-07 22:28:23 ┊ ┊ xcp-volume-2bd88964-3feb-401a-afc1-c88c790cc206 ┊ node2 ┊ 7017 ┊ Unused ┊ Connecting(node1) ┊ UpToDate ┊ 2023-09-07 22:28:26 ┊ ┊ xcp-volume-3ccd3499-d635-4ddb-9878-c86f5852a33b ┊ node0 ┊ 7013 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-09-05 16:13:24 ┊ ┊ xcp-volume-3ccd3499-d635-4ddb-9878-c86f5852a33b ┊ node1 ┊ 7013 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 16:13:28 ┊ ┊ xcp-volume-3ccd3499-d635-4ddb-9878-c86f5852a33b ┊ node2 ┊ 7013 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 16:13:28 ┊ ┊ xcp-volume-43467341-30c8-4fec-b807-81334d0dd309 ┊ node0 ┊ 7003 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 11:28:20 ┊ ┊ xcp-volume-43467341-30c8-4fec-b807-81334d0dd309 ┊ node1 ┊ 7003 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-09-05 11:28:16 ┊ ┊ xcp-volume-43467341-30c8-4fec-b807-81334d0dd309 ┊ node2 ┊ 7003 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 11:28:20 ┊ ┊ xcp-volume-4c368a33-d0af-4f1d-9f7d-486a1df1d028 ┊ node0 ┊ 7016 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-07 22:25:53 ┊ ┊ xcp-volume-4c368a33-d0af-4f1d-9f7d-486a1df1d028 ┊ node1 ┊ 7016 ┊ Unused ┊ Ok ┊ TieBreaker ┊ 2023-09-07 22:25:50 ┊ ┊ xcp-volume-4c368a33-d0af-4f1d-9f7d-486a1df1d028 ┊ node2 ┊ 7016 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-07 22:25:53 ┊ ┊ xcp-volume-5283a6e0-4e95-4aca-b5e1-7eb3fea7fcd3 ┊ node0 ┊ 7014 ┊ Unused ┊ Connecting(node1) ┊ UpToDate ┊ 2023-09-06 14:55:13 ┊ ┊ xcp-volume-5283a6e0-4e95-4aca-b5e1-7eb3fea7fcd3 ┊ node1 ┊ 7014 ┊ ┊ ┊ Unknown ┊ 2023-09-06 14:55:08 ┊ ┊ xcp-volume-5283a6e0-4e95-4aca-b5e1-7eb3fea7fcd3 ┊ node2 ┊ 7014 ┊ Unused ┊ Connecting(node1) ┊ UpToDate ┊ 2023-09-06 14:55:13 ┊ ┊ xcp-volume-5dbfaef0-cc83-43a8-bba1-469d65bc3460 ┊ node0 ┊ 7023 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-10-31 11:53:28 ┊ ┊ xcp-volume-5dbfaef0-cc83-43a8-bba1-469d65bc3460 ┊ node1 ┊ 7023 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-10-31 11:53:28 ┊ ┊ xcp-volume-5dbfaef0-cc83-43a8-bba1-469d65bc3460 ┊ node2 ┊ 7023 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-10-31 11:53:24 ┊ ┊ xcp-volume-603ac344-edf1-43d7-8c27-eecfd7e6d627 ┊ node0 ┊ 7026 ┊ Unused ┊ Connecting(node2) ┊ UpToDate ┊ 2023-11-14 13:00:44 ┊ ┊ xcp-volume-603ac344-edf1-43d7-8c27-eecfd7e6d627 ┊ node1 ┊ 7026 ┊ InUse ┊ Connecting(node2) ┊ UpToDate ┊ 2023-11-14 13:00:44 ┊ ┊ xcp-volume-603ac344-edf1-43d7-8c27-eecfd7e6d627 ┊ node2 ┊ 7026 ┊ ┊ ┊ Unknown ┊ 2023-11-14 13:00:40 ┊ ┊ xcp-volume-702e10ee-6621-4d12-8335-ca2d43553597 ┊ node0 ┊ 7020 ┊ Unused ┊ Connecting(node2) ┊ UpToDate ┊ 2023-10-30 09:56:20 ┊ ┊ xcp-volume-702e10ee-6621-4d12-8335-ca2d43553597 ┊ node1 ┊ 7020 ┊ Unused ┊ Connecting(node2) ┊ UpToDate ┊ 2023-10-30 09:56:20 ┊ ┊ xcp-volume-702e10ee-6621-4d12-8335-ca2d43553597 ┊ node2 ┊ 7020 ┊ ┊ ┊ Unknown ┊ 2023-10-30 09:56:16 ┊ ┊ xcp-volume-7294b09b-6267-4696-a547-57766c08d8fe ┊ node0 ┊ 7007 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-09-05 14:54:00 ┊ ┊ xcp-volume-7294b09b-6267-4696-a547-57766c08d8fe ┊ node1 ┊ 7007 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 14:54:04 ┊ ┊ xcp-volume-7294b09b-6267-4696-a547-57766c08d8fe ┊ node2 ┊ 7007 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 14:54:04 ┊ ┊ xcp-volume-776758d5-503c-4dac-9d83-169be6470075 ┊ node0 ┊ 7008 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-09-05 14:55:33 ┊ ┊ xcp-volume-776758d5-503c-4dac-9d83-169be6470075 ┊ node1 ┊ 7008 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 14:55:38 ┊ ┊ xcp-volume-776758d5-503c-4dac-9d83-169be6470075 ┊ node2 ┊ 7008 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 14:55:38 ┊ ┊ xcp-volume-81809c66-5763-4558-919a-591b864d3f22 ┊ node0 ┊ 7019 ┊ Unused ┊ Connecting(node2) ┊ UpToDate ┊ 2023-10-05 10:41:37 ┊ ┊ xcp-volume-81809c66-5763-4558-919a-591b864d3f22 ┊ node1 ┊ 7019 ┊ Unused ┊ Connecting(node2) ┊ UpToDate ┊ 2023-10-05 10:41:37 ┊ ┊ xcp-volume-81809c66-5763-4558-919a-591b864d3f22 ┊ node2 ┊ 7019 ┊ ┊ ┊ Unknown ┊ 2023-10-05 10:41:33 ┊ ┊ xcp-volume-833eba2a-a70b-4787-b78a-afef8cc0e14d ┊ node0 ┊ 7018 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-07 22:28:35 ┊ ┊ xcp-volume-833eba2a-a70b-4787-b78a-afef8cc0e14d ┊ node1 ┊ 7018 ┊ Unused ┊ Ok ┊ TieBreaker ┊ 2023-09-07 22:28:32 ┊ ┊ xcp-volume-833eba2a-a70b-4787-b78a-afef8cc0e14d ┊ node2 ┊ 7018 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-07 22:28:35 ┊ ┊ xcp-volume-8ddb8f7e-a549-4c53-a9d5-9b2e40d3810e ┊ node0 ┊ 7002 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 11:26:57 ┊ ┊ xcp-volume-8ddb8f7e-a549-4c53-a9d5-9b2e40d3810e ┊ node1 ┊ 7002 ┊ Unused ┊ Ok ┊ TieBreaker ┊ 2023-09-05 11:26:53 ┊ ┊ xcp-volume-8ddb8f7e-a549-4c53-a9d5-9b2e40d3810e ┊ node2 ┊ 7002 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 11:26:57 ┊ ┊ xcp-volume-907e72d1-4389-4425-8e1e-e53a4718cb92 ┊ node0 ┊ 7015 ┊ Unused ┊ Connecting(node1) ┊ UpToDate ┊ 2023-09-07 22:25:46 ┊ ┊ xcp-volume-907e72d1-4389-4425-8e1e-e53a4718cb92 ┊ node1 ┊ 7015 ┊ ┊ ┊ Unknown ┊ 2023-09-07 22:25:42 ┊ ┊ xcp-volume-907e72d1-4389-4425-8e1e-e53a4718cb92 ┊ node2 ┊ 7015 ┊ Unused ┊ Connecting(node1) ┊ UpToDate ┊ 2023-09-07 22:25:46 ┊ ┊ xcp-volume-9fa2ec95-9bea-45ae-a583-6f1941a614e7 ┊ node0 ┊ 7021 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-10-30 09:56:28 ┊ ┊ xcp-volume-9fa2ec95-9bea-45ae-a583-6f1941a614e7 ┊ node1 ┊ 7021 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-10-30 09:56:28 ┊ ┊ xcp-volume-9fa2ec95-9bea-45ae-a583-6f1941a614e7 ┊ node2 ┊ 7021 ┊ Unused ┊ Ok ┊ TieBreaker ┊ 2023-10-30 09:56:24 ┊ ┊ xcp-volume-b24e6e82-d1a4-4935-99ae-dc25df5e8cbe ┊ node0 ┊ 7010 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-09-05 15:29:02 ┊ ┊ xcp-volume-b24e6e82-d1a4-4935-99ae-dc25df5e8cbe ┊ node1 ┊ 7010 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 15:29:06 ┊ ┊ xcp-volume-b24e6e82-d1a4-4935-99ae-dc25df5e8cbe ┊ node2 ┊ 7010 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 15:29:06 ┊ ┊ xcp-volume-d6163cb3-95b1-4126-8767-0b64ad35abc9 ┊ node0 ┊ 7006 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-09-05 14:53:52 ┊ ┊ xcp-volume-d6163cb3-95b1-4126-8767-0b64ad35abc9 ┊ node1 ┊ 7006 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 14:53:56 ┊ ┊ xcp-volume-d6163cb3-95b1-4126-8767-0b64ad35abc9 ┊ node2 ┊ 7006 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 14:53:56 ┊ ┊ xcp-volume-ec956c38-cb1b-4d5d-94d4-fa1c3b754c26 ┊ node0 ┊ 7011 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-09-05 16:12:48 ┊ ┊ xcp-volume-ec956c38-cb1b-4d5d-94d4-fa1c3b754c26 ┊ node1 ┊ 7011 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-09-05 16:12:52 ┊ ┊ xcp-volume-ec956c38-cb1b-4d5d-94d4-fa1c3b754c26 ┊ node2 ┊ 7011 ┊ InUse ┊ Ok ┊ UpToDate ┊ 2023-09-05 16:12:52 ┊ ┊ xcp-volume-fda3d913-47cc-4a8d-8a54-3364c8ae722a ┊ node0 ┊ 7001 ┊ Unused ┊ Connecting(node2) ┊ UpToDate ┊ 2023-08-30 16:16:32 ┊ ┊ xcp-volume-fda3d913-47cc-4a8d-8a54-3364c8ae722a ┊ node1 ┊ 7001 ┊ Unused ┊ Connecting(node2) ┊ UpToDate ┊ 2023-08-30 16:16:35 ┊ ┊ xcp-volume-fda3d913-47cc-4a8d-8a54-3364c8ae722a ┊ node2 ┊ 7001 ┊ ┊ ┊ Unknown ┊ 2023-08-30 16:16:30 ┊ ╰────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯[edit1]
More interesting results:One of my VMs has multiple vdi. The OS disk loads fine. The second disk can only be mounted read-only via
mount -o ro,noload /dev/xvdb /mnt/exampleThe second disk
xcp-volume-5283a6e0...has status "unknown" fromlinstor resource list~~xvda~~ "da5187e4-fdab-4d1b-a5ac-ca1ca383cc70/metadata": "{\"read_only\": false, \"snapshot_time\": \"\", \"vdi_type\": \"vhd\", \"snapshot_of\": \"\", \"name_label\": \"distro_OS\", \"name_description\": \"Created by XO\", \"type\": \"user\", \"metadata_of_pool\": \"\", \"is_a_snapshot\": false}", "da5187e4-fdab-4d1b-a5ac-ca1ca383cc70/not-exists": "0", "da5187e4-fdab-4d1b-a5ac-ca1ca383cc70/volume-name": "xcp-volume-ec956c38-cb1b-4d5d-94d4-fa1c3b754c26", ~~xvdb~~ "19f26a13-a09e-4c38-8219-b0b6b2d4dc26/metadata": "{\"read_only\": false, \"snapshot_time\": \"\", \"vdi_type\": \"vhd\", \"snapshot_of\": \"\", \"type\": \"user\", \"name_description\": \"\", \"name_label\": \"distro_repos\", \"metadata_of_pool\": \"\", \"is_a_snapshot\": false}" "19f26a13-a09e-4c38-8219-b0b6b2d4dc26/not-exists": "0", "19f26a13-a09e-4c38-8219-b0b6b2d4dc26/volume-name": "xcp-volume-5283a6e0-4e95-4aca-b5e1-7eb3fea7fcd3",[/edit1]
[edit2]
I can make VMs that have no disks.
I cannot create new VMs with VDIs on our XOSTOR SR.
I cannot create XOSTOR-hosted disks on existing VMs.
I cannot make snapshots.
I cannot revert to earlier snapshots
I get a not particularly helpful error from xcp-ng center:The attempt to create a VDI failed. Any recommendations about where I should look for related logs?[/edit2]
[edit3]
In case it's relevant, here are the currently installed versions:# yum list installed | grep -i linstor drbd.x86_64 9.25.0-1.el7 @xcp-ng-linstor drbd-bash-completion.x86_64 9.25.0-1.el7 @xcp-ng-linstor drbd-pacemaker.x86_64 9.25.0-1.el7 @xcp-ng-linstor drbd-reactor.x86_64 1.2.0-1 @xcp-ng-linstor drbd-udev.x86_64 9.25.0-1.el7 @xcp-ng-linstor drbd-utils.x86_64 9.25.0-1.el7 @xcp-ng-linstor drbd-xen.x86_64 9.25.0-1.el7 @xcp-ng-linstor java-11-openjdk-headless.x86_64 1:11.0.20.0.8-1.el7_9 @xcp-ng-linstor @xcp-ng-linstor linstor-client.noarch 1.19.0-1 @xcp-ng-linstor linstor-common.noarch 1.24.2-1.el7 @xcp-ng-linstor linstor-controller.noarch 1.24.2-1.el7 @xcp-ng-linstor linstor-satellite.noarch 1.24.2-1.el7 @xcp-ng-linstor python-linstor.noarch 1.19.0-1 @xcp-ng-linstor sm.x86_64 2.30.8-7.1.0.linstor.2.xcpng8.2 @xcp-ng-linstor sm-rawhba.x86_64 2.30.8-7.1.0.linstor.2.xcpng8.2 @xcp-ng-linstor tzdata.noarch 2023c-1.el7 @xcp-ng-linstor tzdata-java.noarch 2023c-1.el7 @xcp-ng-linstor xcp-ng-linstor.noarch 1.1-3.xcpng8.2 @xcp-ng-updates xcp-ng-release-linstor.noarch 1.3-1.xcpng8.2 @xcp-ng-updates[/edit3]
-
So, controller failover works. I used instructions here to test drbd-reactor failover: https://linbit.com/blog/drbd-reactor-promoter/
I'm seeing an error in
linstor error-reports listthat has to do with how linstor queries free space on thin provisioned LVM storage. It traces back to this ticket. https://github.com/LINBIT/linstor-server/issues/80ERROR REPORT 65558791-33400-000000 ============================================================ Application: LINBIT® LINSTOR Module: Satellite Version: 1.24.2 Build ID: adb19ca96a07039401023410c1ea116f09929295 Build time: 2023-08-30T05:15:08+00:00 Error time: 2023-11-15 22:08:11 Node: node0 ============================================================ Reported error: =============== Description: Expected 3 columns, but got 2 Cause: Failed to parse line: thin_device;23044370202624; Additional information: External command: vgs --config devices { filter=['a|/dev/sdn|','a|/dev/sdk|','a|/dev/sdj|','a|/dev/sdm|','a|/dev/sdl|','a|/dev/sdg|','a|/dev/sdf|','a|/dev/sdi|','a|/dev/sdh|','a|/dev/sdc|','a|/dev/sde|','a|/dev/sdd|','r|.*|'] } -o lv_name,lv_size,data_percent --units b --separator ; --noheadings --nosuffix linstor_group/thin_device Category: LinStorException Class name: StorageException Class canonical name: com.linbit.linstor.storage.StorageException Generated at: Method 'getThinFreeSize', Source file 'LvmUtils.java', Line #399 Error message: Unable to parse free thin sizes ErrorContext: Description: Expected 3 columns, but got 2 Cause: Failed to parse line: thin_device;23044370202624; Details: External command: vgs --config devices { filter=['a|/dev/sdn|','a|/dev/sdk|','a|/dev/sdj|','a|/dev/sdm|','a|/dev/sdl|','a|/dev/sdg|','a|/dev/sdf|','a|/dev/sdi|','a|/dev/sdh|','a|/dev/sdc|','a|/dev/sde|','a|/dev/sdd|','r|.*|'] } -o lv_name,lv_size,data_percent --units b --separator ; --noheadings --nosuffix linstor_group/thin_device Call backtrace: Method Native Class:Line number getThinFreeSize N com.linbit.linstor.layer.storage.lvm.utils.LvmUtils:399 getSpaceInfo N com.linbit.linstor.layer.storage.lvm.LvmThinProvider:406 getStoragePoolSpaceInfo N com.linbit.linstor.layer.storage.StorageLayer:441 getSpaceInfo N com.linbit.linstor.core.devmgr.DeviceHandlerImpl:1116 getSpaceInfo N com.linbit.linstor.core.devmgr.DeviceManagerImpl:1816 getStoragePoolSpaceInfo N com.linbit.linstor.core.apicallhandler.StltApiCallHandlerUtils:325 applyChanges N com.linbit.linstor.core.apicallhandler.StltStorPoolApiCallHandler:274 applyFullSync N com.linbit.linstor.core.apicallhandler.StltApiCallHandler:330 execute N com.linbit.linstor.api.protobuf.FullSync:113 executeNonReactive N com.linbit.linstor.proto.CommonMessageProcessor:534 lambda$execute$14 N com.linbit.linstor.proto.CommonMessageProcessor:509 doInScope N com.linbit.linstor.core.apicallhandler.ScopeRunner:149 lambda$fluxInScope$0 N com.linbit.linstor.core.apicallhandler.ScopeRunner:76 call N reactor.core.publisher.MonoCallable:72 trySubscribeScalarMap N reactor.core.publisher.FluxFlatMap:127 subscribeOrReturn N reactor.core.publisher.MonoFlatMapMany:49 subscribe N reactor.core.publisher.Flux:8759 onNext N reactor.core.publisher.MonoFlatMapMany$FlatMapManyMain:195 request N reactor.core.publisher.Operators$ScalarSubscription:2545 onSubscribe N reactor.core.publisher.MonoFlatMapMany$FlatMapManyMain:141 subscribe N reactor.core.publisher.MonoJust:55 subscribe N reactor.core.publisher.MonoDeferContextual:55 subscribe N reactor.core.publisher.Flux:8773 onNext N reactor.core.publisher.FluxFlatMap$FlatMapMain:427 slowPath N reactor.core.publisher.FluxArray$ArraySubscription:127 request N reactor.core.publisher.FluxArray$ArraySubscription:100 onSubscribe N reactor.core.publisher.FluxFlatMap$FlatMapMain:371 subscribe N reactor.core.publisher.FluxMerge:70 subscribe N reactor.core.publisher.Flux:8773 onComplete N reactor.core.publisher.FluxConcatArray$ConcatArraySubscriber:258 subscribe N reactor.core.publisher.FluxConcatArray:78 subscribe N reactor.core.publisher.InternalFluxOperator:62 subscribe N reactor.core.publisher.FluxDefer:54 subscribe N reactor.core.publisher.Flux:8773 onNext N reactor.core.publisher.FluxFlatMap$FlatMapMain:427 drainAsync N reactor.core.publisher.FluxFlattenIterable$FlattenIterableSubscriber:453 drain N reactor.core.publisher.FluxFlattenIterable$FlattenIterableSubscriber:724 onNext N reactor.core.publisher.FluxFlattenIterable$FlattenIterableSubscriber:256 drainFused N reactor.core.publisher.SinkManyUnicast:319 drain N reactor.core.publisher.SinkManyUnicast:362 tryEmitNext N reactor.core.publisher.SinkManyUnicast:237 tryEmitNext N reactor.core.publisher.SinkManySerialized:100 processInOrder N com.linbit.linstor.netcom.TcpConnectorPeer:392 doProcessMessage N com.linbit.linstor.proto.CommonMessageProcessor:227 lambda$processMessage$2 N com.linbit.linstor.proto.CommonMessageProcessor:164 onNext N reactor.core.publisher.FluxPeek$PeekSubscriber:185 runAsync N reactor.core.publisher.FluxPublishOn$PublishOnSubscriber:440 run N reactor.core.publisher.FluxPublishOn$PublishOnSubscriber:527 call N reactor.core.scheduler.WorkerTask:84 call N reactor.core.scheduler.WorkerTask:37 run N java.util.concurrent.FutureTask:264 run N java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask:304 runWorker N java.util.concurrent.ThreadPoolExecutor:1128 run N java.util.concurrent.ThreadPoolExecutor$Worker:628 run N java.lang.Thread:829 END OF ERROR REPORT.I think the
vgsquery is improperly formatted for this version ofdevice-mapper-persistent-data[12:31 node0 ~]# vgs -o lv_name,lv_size,data_percent --units b --noheadings --separator ; vgs: option '--separator' requires an argument Error during parsing of command line.but it works if formatted like this:
[12:32 node0 ~]# vgs -o lv_name,lv_size,data_percent --units b --noheadings --separator=";" MGT;4194304B; VHD-d959f7a9-2bd1-4ac5-83af-1724336a73d0;532676608B; thin_device;23044370202624B;6.96 xcp-persistent-database_00000;1077936128B;13.85 xcp-volume-fda3d913-47cc-4a8d-8a54-3364c8ae722a_00000;86083895296B;25.20 xcp-volume-8ddb8f7e-a549-4c53-a9d5-9b2e40d3810e_00000;215197155328B;2.35 xcp-volume-43467341-30c8-4fec-b807-81334d0dd309_00000;215197155328B;2.52 xcp-volume-5283a6e0-4e95-4aca-b5e1-7eb3fea7fcd3_00000;2194921226240B;69.30 xcp-volume-907e72d1-4389-4425-8e1e-e53a4718cb92_00000;86088089600B;0.60 xcp-volume-4c368a33-d0af-4f1d-9f7d-486a1df1d028_00000;86088089600B;0.06 xcp-volume-2bd88964-3feb-401a-afc1-c88c790cc206_00000;86092283904B;24.81 xcp-volume-833eba2a-a70b-4787-b78a-afef8cc0e14d_00000;86092283904B;0.04 xcp-volume-81809c66-5763-4558-919a-591b864d3f22_00000;215197155328B;4.66 xcp-volume-9fa2ec95-9bea-45ae-a583-6f1941a614e7_00000;86096478208B;0.04 xcp-volume-5dbfaef0-cc83-43a8-bba1-469d65bc3460_00000;215205543936B;6.12 xcp-volume-1e2dd480-a505-46fc-a6e8-ac8d4341a213_00000;215209738240B;0.02 xcp-volume-603ac344-edf1-43d7-8c27-eecfd7e6d627_00000;215209738240B;2.19In fact,
vgs --separatoraccepts pretty much any character except semicolon. Maybe it's a problem with this version of LVM2?[12:37 node0 ~]# yum info device-mapper-persistent-data.x86_64 Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile Excluding mirror: updates.xcp-ng.org * xcp-ng-base: mirrors.xcp-ng.org Excluding mirror: updates.xcp-ng.org * xcp-ng-updates: mirrors.xcp-ng.org Installed Packages Name : device-mapper-persistent-data Arch : x86_64 Version : 0.7.3 Release : 3.el7 Size : 1.2 M Repo : installed From repo : install -
Hi team,
I'm currently testing xostor on a three nodes xcp-8.2.1 pool
Before adding any new vm, i replaced a node (xcp-hc3)
Since everything seems to be ok, i've added two vms.
But I think that a diskless resource is missing for "xcp-persistent-database"
Is there a way to resolve this situation ?[10:23 xcp-hc1 ~]# linstor resource list
╭────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╮
┊ ResourceName ┊ Node ┊ Port ┊ Usage ┊ Conns ┊ State ┊ CreatedOn ┊
╞════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╡
┊ xcp-persistent-database ┊ xcp-hc1 ┊ 7000 ┊ InUse ┊ Ok ┊ UpToDate ┊ 2023-12-18 15:47:37 ┊
┊ xcp-persistent-database ┊ xcp-hc2 ┊ 7000 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-12-18 15:47:37 ┊
┊ xcp-volume-17208381-56c0-4d8a-9c16-0a2000a45e56 ┊ xcp-hc1 ┊ 7004 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-12-18 17:41:41 ┊
┊ xcp-volume-17208381-56c0-4d8a-9c16-0a2000a45e56 ┊ xcp-hc2 ┊ 7004 ┊ InUse ┊ Ok ┊ Diskless ┊ 2023-12-18 17:41:41 ┊
┊ xcp-volume-17208381-56c0-4d8a-9c16-0a2000a45e56 ┊ xcp-hc3 ┊ 7004 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-12-18 17:41:42 ┊
┊ xcp-volume-94af3c03-91b4-46ea-bf51-d0c50a085e6b ┊ xcp-hc1 ┊ 7002 ┊ InUse ┊ Ok ┊ Diskless ┊ 2023-12-19 10:17:15 ┊
┊ xcp-volume-94af3c03-91b4-46ea-bf51-d0c50a085e6b ┊ xcp-hc2 ┊ 7002 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-12-19 09:49:35 ┊
┊ xcp-volume-94af3c03-91b4-46ea-bf51-d0c50a085e6b ┊ xcp-hc3 ┊ 7002 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-12-19 09:49:35 ┊
┊ xcp-volume-a395bb01-76a2-4e9a-a082-f18b3287afb2 ┊ xcp-hc1 ┊ 7005 ┊ Unused ┊ Ok ┊ Diskless ┊ 2023-12-19 10:17:16 ┊
┊ xcp-volume-a395bb01-76a2-4e9a-a082-f18b3287afb2 ┊ xcp-hc2 ┊ 7005 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-12-19 09:49:45 ┊
┊ xcp-volume-a395bb01-76a2-4e9a-a082-f18b3287afb2 ┊ xcp-hc3 ┊ 7005 ┊ Unused ┊ Ok ┊ UpToDate ┊ 2023-12-19 09:49:45 ┊ -
@jmm Self answer :
linstor resource create xcp-hc3 xcp-persistent-database --drbd-diskless
-
J john.c referenced this topic on
-
I am getting :
WARNING: Pool zeroing and 1.00 MiB large chunk size slows down thin provisioning. WARNING: Consider disabling zeroing (-Zn) or using smaller chunk size (<512.00 KiB).How do I change Chunk Size and/or zeroing ?
Can this be done 'on the fly' (without loosing data) ?
-
This post is deleted! -
This thread has grown quite large and has a lot of information in it. Is there an official documentation chapter on XOSTOR available anywhere?
-
For now it's within this thread
Feel free to tell us what's missing in the first post! -
@BHellman The first post has a FAQ that I update each time I meet users with a common/recurring problem.
-
Thanks for the replies. My issues are currently with the GUI so I don't know if that applies here. This is all from the GUI, so please let me know if that's outside the scope of this post and I can post elsewhere.
One issue is upon creating a new XOSTOR SR, the packages are installed, however the SR creation fails due to one of the package, sm-rawhba, that needs updating. You have to apply patched through the GUI then reboot the node, or execute "xe-restart-toolstack" on each node. You can then go back and create a new SR, but only after wiping the disks that you originally tried to create the SR on; vgremove and pvremove.
I'm planning on doing some more testing, please let me know if GUI issues are appropriate to post here.
-
@BHellman It's fine to post simple issues in this thread. For complex problems a ticket is probably better.
One issue is upon creating a new XOSTOR SR, the packages are installed, however the SR creation fails due to one of the package, sm-rawhba, that needs updating.
Not totally that, sm-rawhba is added to the list because the UI installs a modified version of sm with LINSTOR support.
The real issue is that xe-toolstack-restart is not called during the initial setup, a method is missing in our updater plugin to check if a package is present or not, I will add this method for the XOA team. -
I'm not sure what the expected behavior is but....
I have xcp1, xcp2, xcp3 as hosts in my XOSTOR pool, using an XOSTOR repository. I had a VM running on xcp2, unplugged the power from it and left it uplugged for about 5 minutes. The VM remained "running" according to XOA, however it wasn't.
What is the expected behavior when this happens and how do you go about recovering from a temporarily failed/powered off node?
My expectation was that my vm would move to xcp1 (where there is a replica) and start, then outdate xcp2. I have "auto start" enabled under advanced on the VM.
-
@BHellman
"auto start" means that when you power up the cluster or host node that VM will be automatically started.I think you're describing high availability, which needs to be enabled at the cluster level. Then you need to define a HA policy for the vm
-
-
-
I did those commands on xcp1 (pool master) and on the SR that was XOSTOR (linstor) and powered off xcp2. At that point the pool disappeared.
Now I'm getting the following on the xcp servers console:
Broadcast message from systemd-journald@xcp3 (Thu 2024-02-08 14:03:12 EST): xapi-nbd[5580]: main: Failed to log in via xapi's Unix domain socket in 300.000000 seconds Broadcast message from systemd-journald@xcp3 (Thu 2024-02-08 14:03:12 EST): xapi-nbd[5580]: main: Caught unexpected exception: (Failure Broadcast message from systemd-journald@xcp3 (Thu 2024-02-08 14:03:12 EST): xapi-nbd[5580]: main: "Failed to log in via xapi's Unix domain socket in 300.000000 seconds")After powering up xcp2 the pool never comes back in the XOA interface.
I'm seeing this on
xcp1:[14:04 xcp1 ~]# drbdadm status xcp-persistent-database role:Secondary disk:Diskless quorum:no xcp2 connection:Connecting xcp3 connection:Connectingxcp2 and 3
[14:10 xcp2 ~]# drbdadm status # No currently configured DRBD found.Seems like I hosed this thing up really good. I assume this broke because XOSTOR isn't a shared disk technically.
[14:15 xcp1 /]# xe sr-list The server could not join the liveset because the HA daemon could not access the heartbeat disk.Is HA + XOSTOR something that should work?
