Delta backup fails for specific vm with VDI chain error

olivierlambert

Yeah that's why we are focusing on SMAPIv3 instead of trying to "fix" something that's probably flawed by design on SR with slow speed (in general, it works relatively well on SSDs)

_danielgurgel

@olivierlambert said in Delta backup fails for specific vm with VDI chain error:

SMAPIv3

But @olivierlambert, in other posts, even with a FULL SSD disk (SC5020F) we have failed the coalesce process ... when you talk about SMAPIv3 is this something to be implemented exclusively in XCP or will it be inherited from CH 8.x?

olivierlambert

@_danielgurgel if you have failed coalesce even on SSD, you should have something that cause the issue. Majority of users don't have this problem, so I suppose the thing is to find what could cause it.

SMAPIv3 is done by Citrix, but we are doing stuff on our side (upstream as possible, harder since Citrix closed some sources). As soon we have something that people could test, we'll push it into testing

mbt

@olivierlambert said in Delta backup fails for specific vm with VDI chain error:

Thanks! So here is the logic: leaf coalesce will (or should ) merge a base copy and its child ONLY if this base copy get only one child.

Also, here is a good read: https://support.citrix.com/article/CTX201296

You can check if your SR got leaf coalesce enabled, there's no reason to not have it, but still a check to do.

With "only one child" you mean no nested child (aka grandchild)?
As I understand leaf-coalesce can be turned off explicitly and otherwise is on implicitely. It wasn't turned off.
Only thing I could do (I guess) was turn it on explicitely - just to make sure.

[15:31 rigel ~]# xe sr-param-get uuid=f951f048-dfcb-8bab-8339-463e9c9b708c param-name=other-config param-key=leaf-coalesce
true

Nothing has changed so far, so I guess I should go on and see what happens this time if I migrate the vm to the other host?

olivierlambert

Okay so it wasn't disabled, as it should.

To trigger a coalesce, you need to delete a snapshot. So it's trivial to test: create a snapshot, then remove it. Then you'll see a VDI that must be coalesce in Xen Orchestra.

To answer the question: doesn't matter if the child got child too. As long there is only one direct child, it means coalesce should be triggered.

mbt

That doesn't seem to have an effect in the behaviour other then a bunch of new messages in the log.

I'll check in a couple of hours. If the behaviour persists I'll migrate the vm and we'll see how it behaves on the other host.

olivierlambert

Create a snap, display the chain with xapi-explore-sr. Then remove the snap, and check again. Something should have changed

mbt

It changed from

rigel: sr (30 VDIs)
├─┬ customer server 2017 0 - 43454904-e56b-4375-b2fb-40691ab28e12 - 500.95 Gi
│ ├── customer server 2017 0 - dcdef81b-ec1a-481f-9c66-ea8a9f46b0c8 - 0.01 Gi
│ └─┬ base copy - 775aa9af-f731-45e0-a649-045ab1983935 - 318.47 Gi
│   └─┬ customer server 2017 0 - d7204256-488d-4283-a991-8a59466e4f62 - 24.54 Gi
│     └─┬ base copy - 1578f775-4f53-4de4-a775-d94f04fbf701 - 0.05 Gi
│       ├── customer server 2017 0 - 8bcae3c3-15af-4c66-ad49-d76d516e211c - 0.01 Gi
│       └── customer server 2017 0 - 7ef76d55-683d-430f-91e6-39e5cceb9ec1 - 500.98 Gi

to

rigel: sr (29 VDIs)
├─┬ customer server 2017 0 - 43454904-e56b-4375-b2fb-40691ab28e12 - 500.95 Gi
│ ├── customer server 2017 0 - dcdef81b-ec1a-481f-9c66-ea8a9f46b0c8 - 0.01 Gi
│ └─┬ base copy - 775aa9af-f731-45e0-a649-045ab1983935 - 318.47 Gi
│   └─┬ customer server 2017 0 - d7204256-488d-4283-a991-8a59466e4f62 - 24.54 Gi
│     └─┬ base copy - 1578f775-4f53-4de4-a775-d94f04fbf701 - 0.05 Gi
│       └── customer server 2017 0 - 7ef76d55-683d-430f-91e6-39e5cceb9ec1 - 500.98 Gi

olivierlambert

Can you use --full because we can't have colors in copy/paste from your terminal

mbt

A moment later it changed to

rigel: sr (28 VDIs)
├─┬ customer server 2017 0 - 43454904-e56b-4375-b2fb-40691ab28e12 - 500.95 Gi
│ ├── customer server 2017 0 - dcdef81b-ec1a-481f-9c66-ea8a9f46b0c8 - 0.01 Gi
│ └─┬ base copy - 775aa9af-f731-45e0-a649-045ab1983935 - 318.47 Gi
│   └─┬ base copy - 1578f775-4f53-4de4-a775-d94f04fbf701 - 0.05 Gi
│     └── customer server 2017 0 - 7ef76d55-683d-430f-91e6-39e5cceb9ec1 - 500.98 Gi

Unfortunately I cannot do a --full, as it gives me an error:

✖ Maximum call stack size exceeded
RangeError: Maximum call stack size exceeded
    at assign (/usr/lib/node_modules/xapi-explore-sr/node_modules/human-format/index.js:21:19)
    at humanFormat (/usr/lib/node_modules/xapi-explore-sr/node_modules/human-format/index.js:221:12)
    at formatSize (/usr/lib/node_modules/xapi-explore-sr/dist/index.js:66:36)
    at makeVdiNode (/usr/lib/node_modules/xapi-explore-sr/dist/index.js:230:60)
    at /usr/lib/node_modules/xapi-explore-sr/dist/index.js:241:26
    at /usr/lib/node_modules/xapi-explore-sr/dist/index.js:101:27
    at arrayEach (/usr/lib/node_modules/xapi-explore-sr/node_modules/lodash/_arrayEach.js:15:9)
    at forEach (/usr/lib/node_modules/xapi-explore-sr/node_modules/lodash/forEach.js:38:10)
    at mapFilter (/usr/lib/node_modules/xapi-explore-sr/dist/index.js:100:25)
    at makeVdiNode (/usr/lib/node_modules/xapi-explore-sr/dist/index.js:238:15)

olivierlambert

Hmm strange. Can you try to remove all snapshots on this VM?

mbt

Sure. Did it.

The depth in the sr's advanced tab now displays a depth of 3.

rigel: sr (27 VDIs)
├─┬ customer server 2017 0 - 43454904-e56b-4375-b2fb-40691ab28e12 - 500.95 Gi
│ └─┬ base copy - 775aa9af-f731-45e0-a649-045ab1983935 - 318.47 Gi
│   └─┬ customer server 2017 0 - 1d1efc9f-46e3-4b0d-b66c-163d1f262abb - 0.15 Gi
│     └── customer server 2017 0 - 7ef76d55-683d-430f-91e6-39e5cceb9ec1 - 500.98 Gi

This is something new.. we may be on to something:

Aug 27 16:23:39 rigel SMGC: [11997] Num combined blocks = 255983
Aug 27 16:23:39 rigel SMGC: [11997] Coalesced size = 500.949G
Aug 27 16:23:39 rigel SMGC: [11997] Coalesce candidate: *775aa9af[VHD](500.000G//319.473G|ao) (tree height 3)
Aug 27 16:23:39 rigel SMGC: [11997] Coalescing *775aa9af[VHD](500.000G//319.473G|ao) -> *43454904[VHD](500.000G//500.949G|ao)

And after a while:

Aug 27 16:26:26 rigel SMGC: [11997] Removed vhd-blocks from *775aa9af[VHD](500.000G//319.473G|ao)
Aug 27 16:26:27 rigel SMGC: [11997] Set vhd-blocks = (omitted output) for *775aa9af[VHD](500.000G//319.473G|ao)
Aug 27 16:26:27 rigel SMGC: [11997] Set vhd-blocks = eJztzrENgDAAA8H9p/JooaAiVSQkTOCuc+Uf45RxdXc/bf6f99ulHVCWdsDHpR0ALEs7AF4s7QAAgJvSDoCNpR0AAAAAAAAAAAAAALCptAMAYEHaAQAAAAAA/FLaAQAAAAAAALCBA/4EhgU= for *43454904[VHD](500.000G//500.949G|ao)
Aug 27 16:26:27 rigel SMGC: [11997] Num combined blocks = 255983
Aug 27 16:26:27 rigel SMGC: [11997] Coalesced size = 500.949G

Depth is now down to 2 again.
xapi-explore --full now works, but looks the same to me:

rigel: sr (26 VDIs)
├─┬ customer server 2017 0 - 43454904-e56b-4375-b2fb-40691ab28e12 - 500.95 Gi
│ └─┬ base copy - 775aa9af-f731-45e0-a649-045ab1983935 - 318.47 Gi
│   └── customer server 2017 0 - 7ef76d55-683d-430f-91e6-39e5cceb9ec1 - 500.98 Gi

It's busy coalescing. We'll see how that ends.

htop — 182×51 2019-08-27 16-30-47.png

olivierlambert

Yeah, 140MiB/s for coalesce is really not bad Let's see!

mbt

Hm...

rigel: sr (rigel) 2019-08-27 17-23-57.png

rigel: sr (26 VDIs)
├─┬ customer server 2017 0 - 43454904-e56b-4375-b2fb-40691ab28e12 - 500.95 Gi
│ └─┬ customer server 2017 0 - 8e779c46-6692-4ed2-a83d-7d8b9833704c - 0.19 Gi
│   └── customer server 2017 0 - 7ef76d55-683d-430f-91e6-39e5cceb9ec1 - 500.98 Gi

olivierlambert

Yes, it's logical: 7ef76 is the active disk, and it should be merged in 8e77, then this last one should be merged in 4345

mbt

But that never seems to happen. It's always just merging the little VHD in the middle:

Aug 28 10:00:22 rigel SMGC: [11997] SR f951 ('rigel: sr') (26 VDIs in 9 VHD trees): showing only VHD trees that changed:
Aug 28 10:00:22 rigel SMGC: [11997]         *43454904[VHD](500.000G//500.949G|ao)
Aug 28 10:00:22 rigel SMGC: [11997]             *3378a834[VHD](500.000G//1.520G|ao)
Aug 28 10:00:22 rigel SMGC: [11997]                 7ef76d55[VHD](500.000G//500.984G|ao)
Aug 28 10:00:22 rigel SMGC: [11997]
Aug 28 10:00:22 rigel SMGC: [11997] Coalescing parent *3378a834[VHD](500.000G//1.520G|ao)

├─┬ customer server 2017 0 - 43454904-e56b-4375-b2fb-40691ab28e12 - 500.95 Gi
│ └─┬ customer server 2017 0 - 3378a834-77d3-48e7-8532-ec107add3315 - 1.52 Gi
│   └── customer server 2017 0 - 7ef76d55-683d-430f-91e6-39e5cceb9ec1 - 500.98 Gi

Right before this timestamp and probably just by chance I got this:

├─┬ customer server 2017 0 - 43454904-e56b-4375-b2fb-40691ab28e12 - 500.95 Gi
│ └── customer server 2017 0 - 7ef76d55-683d-430f-91e6-39e5cceb9ec1 - 500.98 Gi

But still....

rigel: sr (rigel) 2019-08-28 10-03-00.png

olivierlambert

That's strange. The child is bigger than the parent. I wonder how it's possible but I forgot how the size is computed on LVM (I'm mainly using file backend).

You could try to do a vhd-util repair on those disks. See https://support.citrix.com/article/CTX217757

mbt

The bigger number is equal to the configured virtual disk size.

The repair seems to work only if a disk is not in use - eq offline:

[10:24 rigel ~]# lvchange -ay /dev/mapper/VG_XenStorage--f951f048--dfcb--8bab--8339--463e9c9b708c-VHD--7ef76d55--683d--430f--91e6--39e5cceb9ec1 
[10:26 rigel ~]# vhd-util repair -n /dev/mapper/VG_XenStorage--f951f048--dfcb--8bab--8339--463e9c9b708c-VHD--7ef76d55--683d--430f--91e6--39e5cceb9ec1 
[10:27 rigel ~]# lvchange -an /dev/mapper/VG_XenStorage--f951f048--dfcb--8bab--8339--463e9c9b708c-VHD--7ef76d55--683d--430f--91e6--39e5cceb9ec1 
  Logical volume VG_XenStorage-f951f048-dfcb-8bab-8339-463e9c9b708c/VHD-7ef76d55-683d-430f-91e6-39e5cceb9ec1 in use.

olivierlambert

Have you tried:

repair on both UUIDs in the chain?
trying again when it's halted

mbt

I tried what I did last week: I made a copy.

So I had the VM with no snapshot in the state descibed in my last posts. I triggered a full copy with zstd compression to the other host in XO.

The system created a VM snapshot and is currently in the process of copying.

Meanwhile the gc did some stuff and now says

Aug 28 11:19:27 rigel SMGC: [11997] GC process exiting, no work left
Aug 28 11:19:27 rigel SMGC: [11997] SR f951 ('rigel: sr') (25 VDIs in 9 VHD trees): no changes

xapi-explore-sr says:

rigel: sr (25 VDIs)
├─┬ customer server 2017 0 - 43454904-e56b-4375-b2fb-40691ab28e12 - 500.95 Gi
│ ├── customer server 2017 0 - 16f83ba3-ef58-4ae0-9783-1399bb9dea51 - 0.01 Gi
│ └─┬ customer server 2017 0 - 7ef76d55-683d-430f-91e6-39e5cceb9ec1 - 500.98 Gi
│   └── customer server 2017 0 - 16f83ba3-ef58-4ae0-9783-1399bb9dea51 - 0.01 Gi

Is it okay for 16f83ba3 to appear twice?

The sr's advanced tab in XO is empty.