PCI Passthrough back to dom0
I've been trying to do pci passthrough of an AMD 5600xt . I got it to work on a Windows VM (though I did not test its performance), but now I want to assign the pci back to dom0, and I can't seem to find a straight answer on the web.
# xl pci-assignable-remove -r <uuid>
based on xen documentation but that did not work
Out of frustration I did:
/opt/xensource/libexec/xen-cmdline --set-dom0 "xen-pciback.hide=()"
and when I checked
libxl: error: libxl_pci.c:427:libxl_device_pci_assignable_list: Looks like pciback driver not loaded
Does any one see this being an issue/problem later on?
What would be the proper command to give the pci back to dom0?
onur last edited by
@l1c I am not 100% sure but can you check your grub.cfg and see if the pciback.hide is still there?
If it is there remove the text xen-pciback.hide=(xx:xx.X) . (assuming your system uses EFI)
But use this for the last resort, I am sure someone here will have better solution.
/opt/xensource/libexec/xen-cmdline --delete-dom0 xen-pciback.hideshould do the trick to remove the device from the pci-assignable list of devices at the next reboot.
dom0 rebooting will take control of the device.
I see. I suspected that line in the docs would be it.
In that case, may I suggest modifying the wording in the docs? The current wording suggests the opposite. At least it does to me. The "from" in the docs makes it read as if you are hiding all devices from dom0.
@dthenot Before this thread dies, I just wanted to ask one more thing.
How would you go about only giving back one pci device back dom0?
You can use the following command to display all the PCI devices being passthrough, and then just set them up again without the one you want to remove.
/opt/xensource/libexec/xen-cmdline --get-dom0 xen-pciback.hide
Exactly as @tony said, the option
--delete-dom0just remove the option from the booting command line given to dom0, if you need to remove a device you just need to remove it from the command when calling
--set-dom0. I'll take a look at the doc, you can modify it too, we are always open to contribution .
Thanks for all the help everyone. Everyone here is always very helpful
How does one go about modifying the docs?
There's a link in the bottom of every documentation page
Thanks for the help!