Updates announcements and testing


  • XCP-ng Team

    Hello everyone. I'm back from holidays with update candidates that need testing!

    XCP-ng 7.6

    xcp-ng-xapi-plugins

    yum update xcp-ng-xapi-plugins --enablerepo=xcp-ng-updates_testing
    

    This is the most important update. It fixes host memory consumption issues that could go as far as crashing several hosts at the same time (especially if EPEL repositories were active, which shouldn't be the case but often was prior to XCP-ng 8.0 where they are already present but disabled by default). Already fixed in XCP-ng 8.0.

    Post-install: xe-toolstack-restart

    microcode_ctl

    yum update microcode_ctl --enablerepo=xcp-ng-updates_testing
    

    Microcode update for the SandyBridge family of CPUs regarding the MDS attacks.

    Post-install: reboot if you want it to be taken into account.

    xcp-ng-pv-tools

    yum update xcp-ng-pv-tools --enablerepo=xcp-ng-updates_testing
    

    Linux guest tools: support for SLES 15 SP1, updated README, support for recent CoreOS.

    Post-install: nothing to do.

    xen

    yum update xen-dom0-libs xen-dom0-tools xen-hypervisor xen-libs xen-tools --enablerepo=xcp-ng-updates_testing
    

    Avoids possible memory corruption when forcibly shutting down a VM with AMD MxGPU attached. Or when the guest crashes.

    Post-install: reboot to apply the changes.

    XCP-ng 8.0

    xen + guest templates

    yum update xen-dom0-libs xen-dom0-tools xen-hypervisor xen-libs xen-tools guest-templates-json guest-templates-json-data-windows guest-templates-json-data-xenapp guest-templates-json-data-linux guest-templates-json-data-other --enablerepo=xcp-ng-testing
    

    Avoid doing that on several hosts of the same pool at the same time, because the guest-template-json* updates will need to update the XAPI database at the same time. The /usr/bin/create-guest-templates tool that is called post-update is not designed to run concurrently (thanks to Silmaril on IRC for finding out at the cost of a broken XAPI database).

    Changes:

    • same fix as in XCP-ng 7.6 regarding VMs with AMD MxGPU attached
    • fix a host crash that can occur when you force-shutdown a Windows VM that is in an unclean state
    • Windows VMs could hang for more than a minute after live migration
    • Windows VMs with the viridian_reference_tsc flag enabled could crash during live migration. This fix opens the door to possible performance improvements for your Windows VMs, because following that fix now Citrix advises to set viridian_reference_tsc and viridian_stimer flags to true for better performance.
    • Updated Windows VM templates with new default settings that set viridian_* to true.

    Post-install:

    microcode_ctl

    yum update microcode_ctl --enablerepo=xcp-ng-testing
    

    Microcode update for the SandyBridge family of CPUs regarding the MDS attacks. XCP-ng 8.0 already contained updated microcodes from Intel when released, before Citrix released a hotfix, but their update contains one additional file so we synced with their package.

    Post-install: reboot if you want it to be taken into account.

    What we need

    As usual, Vates tests the updates internally, but we also rely on the community to widen the test cases and hardware tested, so we need you to install the updates and give us feedback, either positive or negative, before we can consider pushing those updates to everyone!



  • @stormi said in Updates announcements and testing:

    XCP-ng 7.6

    [...]

    microcode_ctl

    yum update microcode_ctl --enablerepo=xcp-ng-updates_testing
    

    Microcode update for the SandyBridge family of CPUs regarding the MDS attacks.

    Post-install: reboot if you want it to be taken into account.

    xcp-ng-pv-tools

    yum update microcode_ctl --enablerepo=xcp-ng-updates_testing
    

    I guess that above command for xcp-ng-pv-tools should not be the same as the one for microcode_ctl

    XCP-ng 8.0

    [...]

    microcode_ctl

    yum update microcode_ctl --enablerepo=xcp-ng-updates_testing
    

    This command returns error:

    # yum update microcode_ctl --enablerepo=xcp-ng-updates_testing
    Loaded plugins: fastestmirror
    
    
    Error getting repository data for xcp-ng-updates_testing, repository not found
    

    I guess it meant to be:

    # yum update microcode_ctl --enablerepo=xcp-ng-testing
    

    as this worked for me.

    HTH



  • I installed all these updates for 8.0 and rebooted the host.

    The reboot was extraordinary long. The time from shutting ssh session to getting ping packets back again was about 8 minutes. I don't know what it was doing during all this time as I rebooted remotely.

    So I rebooted once more to see whether the boot time would be so long again.
    This time it was only 1 minutes 46 seconds.

    The VMs seem to run OK so far, but it's just a test host with two VMs doing almost nothing, so I don't know for sure :-).


  • XCP-ng Team

    @MajorTom thanks, I've fixed the post



  • @stormi Installed the updates in our test pool. Until now everything is working. VM migration etc. Also set viridian flags as advised ( xoa vm has this set also? is this OK?)
    Regards

    Christian


  • Admin

    I think Viridian will only have an effect on Windows VMs.


  • XCP-ng Team

    Thanks to those who tested. Still interested in feedback, including on XCP-ng 7.6.


  • XCP-ng Team

    I'll need at least one tester for the latest update candidates on XCP-ng 7.6, and one for 8.0.



  • OK. Installed it on our last 7.6 server. Reboot was OK. VMs run fine. As this is a test host I cannot test more. It runs on AMD so the microcode_ctl should do nothing on our server.


  • XCP-ng Team

    @cnaumer Thanks, this is good enough for me at this stage of the testing, so I can push the 7.6 updates now thanks to you!



  • @cnaumer said in Updates announcements and testing:

    @stormi Installed the updates in our test pool. Until now everything is working. VM migration etc. Also set viridian flags as advised ( xoa vm has this set also? is this OK?)
    Regards

    Christian

    This was an 8.0 pool here. Just to clarify this.



  • @stormi said in Updates announcements and testing:

    I'll need at least one tester for the latest update candidates on XCP-ng 7.6, and one for 8.0.

    At 8.0:
    I did yum update, but there are only new versions of guest-templates-json*, so can't quite see anything to check.

    Just in case I rebooted the host. The reboot took about 1 minute 40 seconds which i s OK for this host.

    The test VMs started OK as well.


  • Admin

    That's enough to check if everything is fine 🙂


  • XCP-ng Team

    So I have pushed the updates described in https://xcp-ng.org/forum/post/16360 to XCP-ng 7.6 and 8.0 repositories. Thanks for the tests.


  • XCP-ng Team


Log in to reply