Good morning, afternoon, evening or night to everybody.

The beta release of XCP-ng 8.0 is available right now .

What's new

• Based on Citrix Hypervisor 8.0 (see https://xen-orchestra.com/blog/xenserver-7-6/).
• New kernel (4.19), updated CentOS packages (7.2 => 7.5)
• Xen 4.11
• New hardware supported thanks to the new kernel. Some older hardware is not supported anymore. It's still expected work in most cases but security cannot be guaranteed for those especially against side-channel attacks on legacy Intel CPUs. See Citrix's Hardware Compatibility List. Note: in 7.6 we've started providing alternate drivers for some hardware. That's something we intend to keep doing, so that we can extend the compatibility list whenever possible. See https://github.com/xcp-ng/xcp/wiki/Kernel-modules-policy.
• ). Note: in 7.6 we've started providing alternate drivers
• Experimental UEFI support for guests (not tested yet: have fun and report!)
• An updated welcome HTML page with the ability to install Xen Orchestra Appliance directly from there (see below). Tell us how it works for you and what you think of it!
• A new implementation of the infamous emu-manager, rewritten in C. Test live migrations extensively!
• Mirrors: you can offer mirrors and yum now pulls from them: https://github.com/xcp-ng/xcp/wiki/Mirrors
• Already includes the latest patches for MDS attacks.
• The net-install installer now checks the signature of the downloaded RPMs against our GPG key, which is becoming more important now that we're delegating downloads to mirrors.
• Status of our experimental packages:
  • ext4 and xfs support for local SR are still considered experimental, although no one reported any issue about it. You still need to install an additional package for it to work: yum install sm-additional-drivers.
  • ZFS packages are now available in the main repositories, can be installed with a simple yum install zfs, and have been updated to version 0.8.1 (as of 2019-06-18) which removes the limitations we had with the previous version in XCP-ng 7.6.
  • No more modified qemu-dp for Ceph support, due to stalled issue in 7.6 (patches need to be updated). However the newer kernel brings better support for Ceph and there's some documentation in the wiki: https://github.com/xcp-ng/xcp/wiki/Ceph-on-XCP-ng-7.5-or-later.
  • Alternate kernel: none available yet for 8.0, but it's likely that we'll provide one later.
• New repository structure. updates_testing, extras and extras_testing disappear and there's now simply: base, updatesandtesting`. Extra packages are now in the same repos as the main packages, for simpler installation and upgrades.
• It's our first release with close to 100% of the packages rebuilt in our build infrastructure, which is Koji: https://koji.xcp-ng.org. Getting to this stage was a long path, so even if it changes nothing for users it's a big step for us. For the curious ones, more about the build process at https://github.com/xcp-ng/xcp/wiki/Development-process-tour.

Documentation

At this stage you should be aware that our main documentation is in our wiki and you should also know that you can all take part in completing it. Since the previous release, it has improved a lot but there's still a lot to improve.

How to upgrade

As usual, there should be two different upgrade methods: classical upgrade via installation ISO or upgrade using yum.

However, the yum-style update is not ready yet. Since this is a major release, Citrix does not support updating using an update ISO, and the consequence for us is that the RPMs have not been carefully crafted for clean update. So it's all on us, and we plan to have this ready for the RC (release candidate).

Before upgrading, remember that it is a pre-release, so the risks are higher than with a final release. But if you can take the risk, please do and tell us how it went and what method you used! However, we've been testing it internally with success and xcp-ng.org already runs on XCP-ng 8.0 (which includes this forum, the main repository and the mirror redirector) !

Although not updated yet, the Upgrade Howto remains mostly valid (except the part about yum-style upgrade, as I said above).

• Standard ISO: http://mirrors.xcp-ng.org/isos/8.0/xcp-ng-8.0.0-beta.iso
• Net-install ISO: http://mirrors.xcp-ng.org/isos/8.0/xcp-ng-8.0.0-netinstall-beta.iso
  • Do not use the pre-filled URL which still points at XCP-ng 7.6. Use this instead: http://mirrors.xcp-ng.org/netinstall/8.0
• SHA256SUMS: http://mirrors.xcp-ng.org/isos/8.0/SHA256SUMS
• Signatures of the sums: http://mirrors.xcp-ng.org/isos/8.0/SHA256SUMS.asc

It's a good habit to check your downloaded ISO against the SHA256 sum and for better security also check the signature of those sums. Although our mirror redirector does try to detect file changes on mirrors, it's shoud always be envisioned that a mirror (or in the worst case our source mirror) gets hacked and managed to provide both fake ISOs and SHA256 sums. But they can't fake the signature.

Stay up to date

Run yum update regularly. We'll fix bugs that are detected regularly until the release candidate. Subscribe to this thread (and make sure to activate mail notifications in the forum parameters if you need them): we'll announce every update to the beta here.

What to test

Everything!

Report or ask anything as replies to this thread.

A community effort to list things to be tested has been started at https://github.com/xcp-ng/xcp/wiki/Test-XCP

Hello to everyone.

The Release Candidate (RC) release of XCP-ng 8.1 is available right now .

This post is a mostly a copy-paste from the beta release announcement, with additions regarding the RC release.

Stability status

Good as far as we call tell from our tests and beta feedback. I would personally use it in production (actually we probably will very soon at Vates). The main unknown is how well the new coalesce algorithm will perform. Now is the time for as large testing as possible before the final release.

What changed

Here's what changes from XCP-ng 8.0. Changes since the 8.1 beta are in bold characters.

Non-exhaustive list:

• Based on Citrix Hypervisor 8.1 (https://docs.citrix.com/en-us/citrix-hypervisor/whats-new.html).
• Same base version of CentOS (7.5)
• Same base version of kernel (4.19, with more patches of course)
  • Latest kernel hotfix from CH 8.1 included in the RC release.
• Xen 4.13
• UEFI support for guests is not experimental anymore
• Support for Secure Boot is NOT INCLUDED because it relies on Proprietary packages. We're raising the issue with the Xen community to see how to provide a FOSS implementation.
• Citrix announces:
  • "Improved performance for VM imports and exports that use the XVA format" thanks to the use of a very efficient hash algorithm
  • "Storage performance improvements"
  • "New Windows I/O drivers with improved performance"
  • (From https://bugs.xenserver.org/browse/XSO-951) The next update (apparently not published yet as of 2020-01-27) of the Windows Drivers through Windows Update should at last be compatible with non-english locales!
• chrony replaces ntp
• Support for PV guests is now deprecated
  • templates for creating PV guests have been removed
  • existing guests will still run
  • it is advised to convert them to HVM guests
  • a compatibility layer should be provided in the future for PV guests that really can't be converted. But really anyone who can convert to HVM, should
  • due to how 32-bit PV guests work, keeping it functioning on newer hardware with newer features comes with an increasing performance cost, and the linux kernel is about to drop support for 32-bit PV guests
• Support for AMD EPYC 7xx2(P) added
• Dynamic Memory Control (DMC) is deprecated and will be removed in the future.
• VSS and quiesced snapshots support is removed, because it never worked correctly and caused more harm than good.
  • For backups, we are working on support for backups that include the guest RAM to replace the need for quiesced snapshots.
  • Note that Windows guest tools version 9 (the default for recent versions of Windows if you install through Windows Update) already removed VSS support, even for older versions of CH / XCP-ng
• For new local storage repositories using the EXT filesystem, it now defaults to ext4.
  • The transition from our experimental ext4 storage driver is not automatic.
  • Instructions for transitioning written in specific section below.
  • sm-additional-drivers package updated to refuse to create new experimental ext4 SRs since ext4 is already the default with the ext driver.
• Status of our specific packages:
  • Experimental support for XFS in local storage repository still available through the sm-additional-drivers package.
  • ZFS still available as an additional package and updated to 0.8.3.
  • Alternate kernel now available, version 4.19.102 (probable update to 4.19.108 before final release). Installing it now automatically adds a new boot entry in grub's configuration, to make testing easier. Default entry remains that of the main kernel.
  • netdata RPMs are now ready
    • r1 contributed a fix to netdata project to bring support for Xen 4.13
    • stormi made netdata cache be RAM-only to workaround an upstream bug that could make the disk cache grow forever
• Plans are laid out for simpler installation and maintenance of Windows guest tools. Unfortunately, we haven't found resources yet to implement them so the current state remains that of 8.0. If you're a developer on the Windows platforms, we're hiring! (full time or part time, contracts or hires) - Contact us.
• Installer improvements in 8.1 RC: see section below.
• New leaf coalesce logic of VDIs with dynamic limits: see section below.
• Fixed VM Autostart issues in 8.1 beta when updated from 8.0 through yum (upstream bug https://bugs.xenserver.org/browse/XSO-978)
• Fixed netxtreme drivers (bnx2x module) that crashed with some models
• Updated zstd to 1.4.4. Possibly even better perfs according to upstream. Still no import/export comparative benchmarks to 8.0. Does anyone volunteer?

Installer improvements in 8.1 RC

Our installer now offers two new installation options. In BIOS mode, access them with F2 when offered the choice. In UEFI mode, see the added boot menu entries.

• First new option: boot the installer with a 2G RAM limit instead of the 8G default. This is a workaround for installation issues on hardware with Ryzen CPUs. Though those are Desktop-class CPUs and not supported officially in the HCL, we tried to make it easier to workaround the infamous "installer crashes on Ryzen" issue.
• Second new option: boot the installer with our alternate kernel (kernel-alt). That kernel, built and maintained by r1 for the team, is based on the main kernel, with all upstream kernel.org patches from the LTS 4.19 branch applied. It should be very stable by construction but it receives less testing. That option is there for cases when the main kernel and drivers have issues, so that you can quickly test if kernel.org patches have fixed it already. It will also install the alternate kernel in addition to the main kernel as a convenience. If kernel-alt fixes issues for you, the most important thing to do is to tell us so that we may fix the main kernel!

Announcement about our former experimental ext4 SR driver

It is now deprecated in 8.1. For a good reason: in XCP-ng 8.1 and above, following upstream changes, the ext driver now formats new SRs as EXT4. Existing SRs are untouched (so remain formatted to EXT3).

There is no easy way to convert an existing SR created with our driver, so those using it will need to move the VDIs out (to another SR or to export them), destroy the SR and create an EXT SR instead. Make sure to do this on XCP-ng 8.1.

The sm-additional-drivers package remains available in XCP-ng 8.1 in order to ease the transition. However I've broken the sr-create command on purpose. Any attempt to create a SR of type ext4 will result in an error with a message that explains that you need to use the ext type instead.

Our experimental driver will be completely removed in a later release, possibly XCP-ng 8.2. Unless someone convinces me to delay the removal for a good reason. I will accept reasons such as "I know I shouldn't have used the experimental driver in production, but I did and need more time to convert my SR while at the same time I really need feature xxx from XCP-ng 8.2", but I really would prefer to drop it in 8.2.

Feedback from people doing the transition is welcome to make sure we document the transition in the best way possible.

New leaf coalesce logic with dynamic limits

I have backported patches from sm's master branch, that implement a new, smarter, logic for leaf coalescing.

Those interested in the patches, see https://github.com/xcp-ng-rpms/sm/commit/ed1a55d727846cf5777c8258e6a8f3b068e8a35b (python code).

Feedback wanted.

Documentation

At this stage you should already be aware that our main documentation is in our wiki and you should also know that you can all take part in completing it. It's improving continuously and still has room for improvement.

How to upgrade from XCP-ng 8.1 beta

Just use yum update or Xen Orchestra as if you were installing updates to a stable release.

How to upgrade from previous releases

Since XCP-ng 8.1.0 is a minor release, both upgrade methods are supported:

• From the installation ISO
• From command line using yum (from XCP-ng 8.0 only!)

Refer to the upgrade howto: https://github.com/xcp-ng/xcp/wiki/Upgrade-Howto

Downloads:

• Standard ISO: http://mirrors.xcp-ng.org/isos/8.1/xcp-ng-8.1.0-RC1.iso
• Net-install ISO: http://mirrors.xcp-ng.org/isos/8.1/xcp-ng-8.1.0-RC1-netinstall.iso
• SHA256SUMS: http://mirrors.xcp-ng.org/isos/8.1/SHA256SUMS
• Signatures of the sums: http://mirrors.xcp-ng.org/isos/8.1/SHA256SUMS.asc

If your browser tells you that the page is redirected in a way that prevents from loading the page correctly, this is a known issue. Long story short, it's caused by a wrong security header sent by the forum software, which impacts all non HTTPS requests to the xcp-ng.org domain. Try in Private Navigation mode or use curl or wget.

It's a good habit to check your downloaded ISO against the SHA256 sum and for better security also check the signature of those sums. Although our mirror redirector does try to detect file changes on mirrors, it's should always be envisioned that a mirror (or in the worst case our source mirror) gets hacked and managed to provide both fake ISOs and SHA256 sums. But they can't fake the signature. See https://github.com/xcp-ng/xcp/wiki/How-to-check-the-authenticity-of-files-downloaded-from-XCP-mirrors.

Stay up to date

Run yum update regularly. We'll fix bugs that are detected regularly until the final release. Subscribe to this thread (and make sure to activate mail notifications in the forum parameters if you need them): we'll announce every important update to the RC here.

What to test

Everything and Anything!

Report or ask anything as replies to this thread.

A community effort to list things to be tested has been started at https://github.com/xcp-ng/xcp/wiki/Test-XCP

Feedback is welcome both about successes and failures.

Hello to everyone.

There's a very important way to prove to the world that your software is good: excellence in documentation. A project without good documentation is not appealing and looks un-professional.

I mentioned it here or there, but never made a proper announcement, so here it is: we are now using the wiki on our github project to store documentation:

https://github.com/xcp-ng/xcp/wiki

Now, as you can see, it's missing a lot of useful information. Every red link leads to a non-existent page that should exist, and I probably forgot to add many of them. Thankfully, our community comprises many experienced users of XS and XCP-ng, so we should be able to fill the gap.

I'm myself totally unable of writing documentation about storage or networking. My field of expertise is packaging, updates, releases, patching, writing some code. So I only write about what I know. But I'm sure you're not thinking that I will write the documentation alone.

So this is the official start of the "let's improve the documentation together" campaign. Any github user has write access to that wiki (it's versioned so we can revert changes from trolls if needed).

Don't ask for permission before adding or modifying something to the documentation. Just do it, and others will review it.

Even the structure of the home page can be modified. I made one to help us start and see where contributions are needed, but it's just a way to help us start.

Who's in? If you were looking for a way to get involved in XCP-ng but did not know how, here's your chance!

It's now live!

https://xcp-ng.org/blog/2022/11/18/xcp-ng-8-3-alpha/

Hello everyone.

I'm Samuel Verschelde. I started working full-time on XCP-ng on the 18th or June, so little more than one week ago. It's a pleasure to join your community and to devote my time to this free software project.

Obviously, my first mission targets the release of XCP-ng 7.5. So I figured I'd write a status update post to let you know what's been done, what is being done and what remains to be done. It's easy to get carried away by technical work and to forget to communicate, and I'll try not to fall in this trap. Since I'm still quite new to XCP-ng, please forgive me in advance any approximation or mistake in what I'll write. Just don't hesitate to point any mistake I might be doing, or any omission.

What needs to be done

So, basically the process of releasing the new version of XCP-ng, at the moment (this will evolve), is as follows:

• Get the installation and source ISOs from XenServer 7.5.
• Rebrand to XCP-ng and remove trademarked material (Citrix name, XenServer name, Citrix logo, splash screen...).
• Modify the licensing system to remove the restrictions for features that depend on free software.
• Remove proprietary software components from Citrix that we aren't allowed to redistribute.
• Fix a few known bugs
• Create an update repository for transitioning from 7.4
• Build the installation ISO
• Test (internally at first, but we'll quickly involve the community)
• Release
• (ideally, because we're a free software project after all) Provide source RPMs.

So were are we at this stage?

Rebrand to XCP-ng and remove trademarked material

Mostly done.

We do this for legal reasons, and Citrix obviously doesn't want its name (or XenServer) to be associated with XCP-ng.
Amusingly, though, they added their name in the description of several packages in 7.5. Some of these additions are clarifications, so that's good to help us detect proprietary software or trademarked material among the free software components.

But some other are suprising, such as what they did to the linux kernel package: they added a Citrix logo image in the package (which otherwise contains free software), and then changed the package license from GPLv2 to Portions GPL, Portions Non-Redistributable (See description). And description of the package now contains:

Citrix, the Citrix logo, Xen, XenServer, and certain other marks appearing
herein are proprietary trademarks of Citrix Systems, Inc., and are
registered in the U.S. and other countries. You may not redistribute this
package, nor display or otherwise use any Citrix trademarks or any marks
that incorporate Citrix trademarks without the express prior written
authorization of Citrix. Nothing herein shall restrict your rights, if
any, in the software contained within this package under an applicable
open source license.

Portions of this package are 2017 Citrix Systems, Inc. For other
copyright and licensing information see the relevant source RPM.

A lot of claims for an added logo.

Since the kernel contained by this package is free software, we made a new package without the added claims and without that added logo, so that we can redistribute it.

Modify the licensing system to remove the restrictions for features that depend on free software

We hoped we could simply reuse our package from 7.4.1 but it seems it's not sufficient. Investigations by johnelse are in progress. Maybe they changed the protocol, maybe we just need a rebuild against latest xapi.

Remove proprietary software components from Citrix that we aren't allowed to redistribute

Some are easy to remove, such as the ParaVirtualization (PV) tools for Windows, which are proprietary. I've been told that Xen Orchestra has support for installing them easily, so we shouldn't miss them too much.

There's one that's giving johnelse trouble, though: EMU Manager

This closed-source component is tightly coupled to other free software core components. Since I know little about it, I'll let John explain:

emu-manager is a layer between xenopsd (the host-level domain management daemon) and xenguest (which deals with the creation of xen domains) and vgpu (which does the graphics emulation for vGPU)
It is invoked when VMs are suspended, resumed or migrated

To put things in a few words: there's a close-source component that we can't remove without losing suspend, resume and migrate features. So we have to replace it with a free-software component of our own, and that's a hard work: the interfaces are public but not the internals. And we'll lose the vGPU migration ability in the process.

We expect to finish this in two weeks from now, but that may slip. If you think you can help, contact johnelse or come discuss on the #xcp-ng-dev IRC channel on freenode (we both are on a European timezone).

Fix a few known bugs

• Broken link to XCP-ng center in the HTML welcome page: fixed for 7.5.
• Missing /etc/shadow and other files in install.img: will be fixed when building the new ISO images.
• Fix xcp-python-libs bug mentioned at https://xcp-ng.org/forum/topic/79/configure-dom0-memory-not-work
• Maybe more? I'm not sure this list is exhaustive.

Create an update repository for transitioning from 7.4

Nearly done.

Build the installation ISO, Test, Release

Depends on the above other tasks.

Community involvement

Now that I'm available almost all the time, it should become easier to include contributers from the community. We don't have the target infrastructure for that yet, but it's already possible to help at various stages. So don't hesitate to discuss it on this forum, to contact me ( stormi-xcp@ylix.fr ) or to come to chat on freenode's #xcp-ng-dev IRC channel.

And if you read all of this, thanks!

FYI, I have just published security updates today PLUS the fixed ixgbe driver as an official update to XCP-ng 8.1 and 8.2.

We made it. This is the end of this huge thread.

A big thank you to everyone involved in debugging the issue.

And this is not a :D.

Context: various recent devices on the consumer market require network drivers which are not present in XCP-ng 8.2.

Based on the work made with Andrew for XCP-ng 8.3, I've finally found some time to backport the drivers to XCP-ng 8.2.

The following optional driver packages will soon be updated on the default repositories:

• igc-module (backported from kernel 5.10.150): adds support for Intel I225/I226.
• intel-e1000e-alt (updated to 3.8.7): adds support for Intel I219-V.
• r8125-module (updated to 9.010.01) for RealTek r8125. Quoting Andrew:

  Note: This 8125 driver has SG/TSO, PTP, RSS enabled by default.
  Note: This 8125 driver has (optional) firmware loading enabled. Please manually download the rtl8125 firmware and install in XCP in /usr/lib/firmware/rtl_nic .
  Note: The 8125 Chipset/PCI-E card/driver has been known to cause system problems and crashes (not an XCP problem).

These are Additional packages, which means only best effort support is provided for them.

Update (2023-05-03): packages now moved to the xcp-ng-updates repository, which means they can be installed with a simple yum install name_of_package, without the need for extra parameters.

I'm publishing new updates to the base repository of XCP-ng 8.3:

• Security fixes for AMD
• Debian 12 VM template
• Removal of the old and unused experimental EXT4 SR driver. Don't jump: the main EXT SR driver still uses EXT4. I'm talking of the old experimental driver we added back then when the default EXT driver would use EXT3 only. This experimental driver has been deprecated since XCP-ng 8.1.
• smartmontools updated to version 7 which brings JSON output
• A fix for live migration support in IPv6-only pools

XCP-ng 8.3 beta 1 is released!

Announcement: https://xcp-ng.org/blog/2023/06/22/xcp-ng-8-3-beta-1/

This thread is the place where we can discuss this release and where all testers can provide feedback.

Update: AND now Beta 2 released too. We're keeping the same thread.

Hello here! I hope you are ready, because we'll have a train of update candidates for you to test shortly

Ok, let's involve Team-XAPI-Network

flakpyro No VM stats despite a reboot of the hosts?

New update candidates for you to test!

As we move closer to making XCP-ng 8.3 the new LTS release, taking over from XCP-ng 8.2.1, a new batch of update candidates is now available for user testing ahead of a future collective release. Details are provided below.

• biosdevname: Update as a dependency for another component.
• blktap: Fix: enable NBD client only after completing handshake
• cyrus-sasl: Fix for CVE-2022-24407 (not directly affecting XCP-ng in normal use).
• gpumon: Rebuild for XAPI update.
• intel-ice: Update ice driver to v1.15.5
• kernel: improve timer handling for better compatibility with hardware.
• plymouth: Packaging update. No visible changes.
• psmisc: Update to version 23.6.
• python-urllib3: Update to version 1.26.30.
• rsync:
  • Update to version 3.4.1
  • Fixes for CVE-2024-12084, CVE-2024-12085, CVE-2024-12086, CVE-2024-12087, CVE-2024-12088, CVE-2024-12747
  • The rsyncd configuration and systemd unit files now come in a separate package named rsyncd-daemon, not installed by default
• smartmontools: Update to version 7.4
• xapi:
  • Drop FCoE support when fcoe_driver does not exists
    • FCoE support will be removed from next versions
  • No more CPU checks for halted VMs in cross-pool migration
  • Move CPU check to the target host during cross-pool migration
  • Serialize all PCI and VUSB plugs to keep them ordered
  • Fixes multiple issues in periodic scheduler
  • Fixes multiple issues in the way XAPI handles RRD metrics
  • Improve SR.scan by reducing a racing window when updating the XAPI db
  • A lot or maintenance-related changes, XAPI being a very active project.
• xcp-featured: rebuilt for XAPI
• xcp-ng-release: update copyright years and EULA
• xen:
  • Improve support for Zen 5 and Diamond Rapids CPUs
  • IOMMU logic improvements and fixes
  • add PCI quirks for problematic hardware (e.g Cisco VIC UCSX-ML-V5D200GV2)
  • fix emulation of MOVBE
• xenserver-status-report: maintenance update.
• xha:
  • Support configurable syslog printing
  • Fixes issue where sub-threads can't be scheduled enough resources.

Test on XCP-ng 8.3

From an up-to-date host:

yum clean metadata --enablerepo=xcp-ng-testing
yum update --enablerepo=xcp-ng-testing
reboot

The usual update rules apply: pool coordinator first, etc.

Versions

• biosdevname: 0.3.10-5.xcpng8.3
• blktap: 3.55.5-2.1.xcpng8.3
• cyrus-sasl: 2.1.26-24.el7_9
• gpumon: 24.1.0-40.1.xcpng8.3
• intel-ice: 1.15.5-2.xcpng8.3
• kernel: 4.19.19-8.0.38.1.xcpng8.3
• plymouth: 0.8.9-0.31.20140113.3.xcpng8.3
• psmisc: 23.6-2.xcpng8.3
• python-urllib3: 1.26.20-3.1.xcpng8.3
• rsync: 3.4.1-1.1.xcpng8.3
• smartmontools: 7.4-2.xcpng8.3
• xapi: 25.6.0-1.4.xcpng8.3
• xcp-featured: 1.1.8-1.xcpng8.3
• xcp-ng-release: 8.3.0-31
• xen: 4.17.5-9.1.xcpng8.3
• xenserver-status-report: 2.0.11-1.xcpng8.3
• xha: 25.0.0-1.1.xcpng8.3

What to test

Normal use and anything else you want to test. The closer to your actual use of XCP-ng, the better.

Test window before official release of the updates

None defined, but early feedback is always better than late feedback, which is in turn better than no feedback

We will not be very available on this forum until Monday to help fixing issues if there are any, so don't update too fast if that's a possible problem for you.*

flakpyro Could you export the output of xen-bugtool -y and make it available somewhere privately? This will contain all logs and information about the hardware. Let us know also of times where you rebooting a VM and got this issue.

Greg_E We announce updates here. There's no frequency set in stone. We're working on the next wave of updates, that is ready except that we found a regression so we're working on fixing that first.

If you're adventurous, there's a way to install this next wave earlier, but until it passed internal checks, I don't guarantee that your pool doesn't explode with these.

Could someone summarize this thread for me (XCP-ng Product Owner) so that I see what could be worth tracking and/or doing on our side?

Indeed, we forgot to tell you about this temporary regression. They're coming back in the next batch of updates, as soon as CI is green!

Dual stack support for IPv4 + IPv6 on the management interface in XCP-ng 8.3:

• requires reinstalling to define both IPv4 and IPv6 for the management interface
• is still experimental, there are a few known issues

CC BenjiReis gthvn1 andriy.sultanov

CCing anthonyper who is tasked with following this regression closely and letting us know about any progress.

bberndt https://bugzilla.redhat.com/show_bug.cgi?id=2331326

There's also a KB now: https://access.redhat.com/solutions/7116307