Nested Virtualization of Windows Hyper-V on XCP-ng
-
i am trying to calculate for my vm...
the cpu id on pool is
1fcbfbff-80b82221-2993fbff-00000403-00000000-00000000-00000000-00000000-00001000-9c000000-00000000-00000000-00000000-00000000-00000000i must change the second "team" of 8 digits? I suppose that it is something in hex.
You wrote that the hypervisor bit is the top one. What do you mean?
I should add on 80b82221 the value 0x7fffffff? -
@alexanderk I think @olivierlambert wants us to logically AND the bits there. Will give it a try later on my pool.
-
@olivierlambert @AlexanderK Wow! Changing the platform:featureset=value as prescribed does indeed enable support for nested Hyper-V on XCP-ng!! This is huge!!! I will now need to begin testing some of the actual Hyper-V-dependent functions in the nested Windows guest. The msinfo32.exe command displays no apparent knowledge that the guest OS is running on a hypervisor. It simply indicates that all four prerequisites for running Hyper-V are enabled. It would appear that this platform modification effectively tells the XCP-ng VM to lie to the nested guest OS: "No, you are not running on a hypervisor." BTW, I still have all of the latest pre-release patches installed that we tested a couple of weeks ago for @stormi . Therefore, the tested Windows VM is also booting with secure boot support by @beshleman along with this additional major breakthrough. Because of nested virtualization's complexity, there will no doubt be additional hurdles we need to jump over to make the desired guest functions work, but we have made tremendous progress in a rather short span of time. Congratulations everybody! If it's possible, we may want to change the title of the post to Nested Virtualization of Windows Hyper-V on XCP-ng as that will provide an easier way for it to be found by others. I can't really adequately express my gratitude to all of you for the amazing level of support! (Pinging some others who have fought with this issue in the past and will no doubt appreciate hearing of its progress: @Noiden @Haribo112 )
-
@xcp-ng-justgreat Title changed.
Can you help me with the AND and what exactly have you done? Give me an example to understand.
-
-
@alexanderk I think you need to run the PowerShell command to get second-level (L2) nested virtualization within Hyper-V. You are now effectively running yet another VM inside of an existing VM (like Russian dolls-nested) so you need to expose the processor hardware virtualization from L1 to L2. See here: https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/user-guide/nested-virtualization
-
I have to admit I don't grasp everything (also I'm not a Windows expert) I still wonder why changing what we did is making it work (in details, your feeling is likely right @XCP-ng-JustGreat )
So you are running Docker inside a nested Windows, which is itself nested in XCP-ng?
-
@olivierlambert trying to do this but it is not working.
@XCP-ng-JustGreat docker works for you? even hyper-v shows error.
Can anyone explain with an example the calculation of new value? -
@alexanderk If you are running a current version of Windows 10, you can use the Calculator app. It has a programmer mode that allows you to enter the 32-bit source value from the platform cpuid in hex and bitwise AND it with 0x7FFFFFFF. Programmer mode is widely available on calculators for Linux too so use the tool with which you are most comfortable.
-
@xcp-ng-justgreat said in Nested Virtualization of Windows Hyper-V on XCP-ng:
0x7FFFFFFF
there are some groups of hex digits at the cpu id.
I use the second group of digits?The second group is 80b82221 and with bitwise and 7FFFFFF i have this
the result is 6 digits. Is this correct?
-
@alexanderk Two leading hex zeros (8-bits) are implied.
-
@xcp-ng-justgreat
ok thanks.
desktop docker worked at your vm? -
hyperv is working without issues?
-
@alexanderk (With apologies to all for the following dense reading as there is much detail. TLDR; Hyper-V installs, but remains disabled on XCP-ng. Hyper-V installs, is enabled, and starts fine on ESXi where nested Hyper-V works. Methodology and items tested to follow.) No breakthrough yet. The Windows Hyper-V feature installs fine into the guest, but it does not appear to become active following the reboot. This is the same behavior that occurs using pure vanilla Xen hypervisor. I set up two parallel test environments: one using ESXi 6.7 Build 17700523 which works perfectly, and another using XCP-ng which does not yet work. Host hardware is very similar with identical Intel processors. Turning off the "hypervisor running" CPUID bit 31 in XCP-ng using the technique provided by @olivierlambert remains an essential prerequisite step. VMware's hypervisor.cpuid.v0 = "FALSE" .vmx setting is the equivalent configuration change required for nested virtualization to work on ESXi. After booting identical Windows 10 VMs on each hypervisor, I ran the Windows Sysinternals CoreInfo64.exe and CoreInfo64.exe -v commands inside the guests in order to compare the processor features available in each case. The active CPU flags appeared to all be the same except that XCP-ng had three additional flags set: acpi, hle and rtm that were not present in the ESXi guest. Likewise, ESXi had the x2apic flag set which was not present in the XCP-ng guest. It appears that the corresponding x2apic CPUID bit 21 from our modified platform:featureset=CPUID 32-bit word is on, presumably making that feature available in the VM despite it showing disabled in the guest. The other thing that is different between the two is that on ESXi, the CoreInfo64.exe -v command shows that all four CPU assisted virtualization feature flags are reversed after Hyper-V is installed and activated following a reboot. In other words, hypervisor present becomes true (Hyper-V is now active) and the other three flags: vmx, ept and urg (unrestricted guest) are all false. I continue to be frustrated that there doesn't seem to be an authoritative document for all of the platform:mapkey=value pairs for XenServer/XCP-ng. Similarly, there appear to be additional global hypervisor settings enabled with the /opt/xensource/libexec/xen-cmdline <param(s)> for which I can't find any documentation. For example, there is the /opt/xensource/libexec/xen-cmdline --set-xen force_software_vmcs_shadow global setting that is required by the one Citrix-supported nested virtualization configuration. Search for Bromium in the Citrix online docs for further information. If anybody knows where to find the complete documentation for the platform:mapped key/value pairs and the global hypervisor settings like the one cited, I'd be very interested. One other thing examined was the system Hyper-V drivers loaded in the two nested guest configs. Each appeared to have the same set of drivers loaded without any failures. However, the HV Host Service would not start on XCP-ng, yet starts fine on the working ESXi hosted VM. (Probably requires Hyper-V to be active so is an observed effect rather than a cause.) Any suggestions for additional productive avenues of inquiry are much appreciated. I will keep working on it.
-
Thanks for the detailed feedback @XCP-ng-JustGreat
Let me check around if I can find more information.
-
Okay so I've been told that we should try with an extra Xen patch: https://paste.debian.net/hidden/870debb8/
@stormi do we have a guide to assist on rebuilding Xen with this extra modification?
-
@olivierlambert I'm happy to try out an alternate Xen kernel if that's what we're talking about. Please let me know if there is anything else that you need from me. It feels like we are so close to solving this
. . . -
You can use our build container https://github.com/xcp-ng/xcp-ng-build-env on the RPM sources for
xenin XCP-ng 8.2 https://github.com/xcp-ng-rpms/xen/tree/8.2 to build new packages.To add a patch, add it to SOURCES/ and list it in the spec file. The patch may fail to apply as it could have been made against a different version of xen, in which case it will need to be adjusted to the current codebase.
-
I've not compiled an OS kernel before, but I'm willing to give it a try. It will probably take me a while to get the containerized development environment set up, etc. in order to build the updated kernel. I don't pretend to understand what this code does or how it may or may not fix nested Hyper-V on XCP-ng.
Here is the source code that we have been asked to integrate:
diff --git a/xen/arch/x86/hvm/vmx/vvmx.c b/xen/arch/x86/hvm/vmx/vvmx.c index e9f94daf64..4c80912368 100644 --- a/xen/arch/x86/hvm/vmx/vvmx.c +++ b/xen/arch/x86/hvm/vmx/vvmx.c @@ -2237,6 +2237,7 @@ int nvmx_msr_read_intercept(unsigned int msr, u64 *msr_content) /* 1-settings */ data = PIN_BASED_EXT_INTR_MASK | PIN_BASED_NMI_EXITING | + PIN_BASED_VIRTUAL_NMIS | PIN_BASED_PREEMPT_TIMER; data = gen_vmx_msr(data, VMX_PINBASED_CTLS_DEFAULT1, host_data); break; -
@stormi Which host OS should be used to create the containerized XCP-ng build environment? My build host will be a VM running on XCP-ng (of course). I'm looking for the choice that mostly "just works" with the fewest adjustments. Would that be CentOS 7 or 8, Debian 10 or something else? Thanks for your guidance.
