XOSTOR hyperconvergence preview

ronan-a

@dumarjo Well, the new node (xcp-ng-04) is missing in the LINSTOR database. You must add it.

ronan-a

@Huxy Yeah for the moment we support only thin and thick LVM. We also want to support ZFS for several features: ZFS snapshots and lifting the restriction of the VHD format (maximum 2TB of data). Unfortunately we don't have a planning for this now. This will probably be done in the SMapiv3, not in the V1.

Huxy

@ronan-a no worries. Thanks for the quick response. I'll consider moving to LVM or staying with Proxmox for the time being.

dumarjo

@ronan-a

Is my understanding is good ? A XCP-NG host cannot use a shared SR (based on linstor) if it's not part of the linstor nodes ?

How this new host can be part of the nodes if I don't want to add HDD/SSD to this new host ? can it be done ?

Again, I want to know the limitation before thinking using this new promising technology !

ronan-a

@dumarjo

A XCP-NG host cannot use a shared SR (based on linstor) if it's not part of the linstor nodes ?

Yeah it's required to use diskless devices.

How this new host can be part of the nodes if I don't want to add HDD/SSD to this new host ? can it be done ?

There are small changes to add to support a node without storage. But it's feasible with a modification in the driver. It should be supported because diskless volumes is a feature of DRBD to access to data using local network.

dumarjo

@ronan-a
Hi,

I did some experiment... and cannot get the missing piece of the puzzle to add my xcp-ng-04 host.

From my last status, I have my new xcp-ng-04 host part of the pool and I have installed all the tools for the linstor.

I checked the services for satellite and controller on the xcp-ng-04 and they are not running. I have no Idea if I need to start something manualy of not.

Here my SMlog on a freshly booted xcp-ng-04

Mar 22 11:54:14 xcp-ng-04 SM: [2685] sr_attach {'sr_uuid': '38c2baa3-bc8f-fbc5-ef5a-42461db92c51', 'subtask_of': 'DummyRef:|b4ea936f-80bb-4a6b-98b9-66a95f86b006|SR.attach', 'args': [],$
Mar 22 11:54:14 xcp-ng-04 SMGC: [2685] === SR 38c2baa3-bc8f-fbc5-ef5a-42461db92c51: abort ===
Mar 22 11:54:14 xcp-ng-04 SM: [2685] lock: opening lock file /var/lock/sm/38c2baa3-bc8f-fbc5-ef5a-42461db92c51/running
Mar 22 11:54:14 xcp-ng-04 SM: [2685] lock: opening lock file /var/lock/sm/38c2baa3-bc8f-fbc5-ef5a-42461db92c51/gc_active
Mar 22 11:54:14 xcp-ng-04 SM: [2685] lock: tried lock /var/lock/sm/38c2baa3-bc8f-fbc5-ef5a-42461db92c51/gc_active, acquired: True (exists: True)
Mar 22 11:54:14 xcp-ng-04 SMGC: [2685] abort: releasing the process lock
Mar 22 11:54:14 xcp-ng-04 SM: [2685] lock: released /var/lock/sm/38c2baa3-bc8f-fbc5-ef5a-42461db92c51/gc_active
Mar 22 11:54:14 xcp-ng-04 SM: [2685] lock: opening lock file /var/lock/sm/38c2baa3-bc8f-fbc5-ef5a-42461db92c51/sr
Mar 22 11:54:14 xcp-ng-04 SM: [2685] lock: acquired /var/lock/sm/38c2baa3-bc8f-fbc5-ef5a-42461db92c51/running
Mar 22 11:54:14 xcp-ng-04 SM: [2685] lock: acquired /var/lock/sm/38c2baa3-bc8f-fbc5-ef5a-42461db92c51/sr
Mar 22 11:54:14 xcp-ng-04 SM: [2685] RESET for SR 38c2baa3-bc8f-fbc5-ef5a-42461db92c51 (master: True)
Mar 22 11:54:14 xcp-ng-04 SM: [2685] lock: released /var/lock/sm/38c2baa3-bc8f-fbc5-ef5a-42461db92c51/sr
Mar 22 11:54:14 xcp-ng-04 SM: [2685] lock: released /var/lock/sm/38c2baa3-bc8f-fbc5-ef5a-42461db92c51/running
Mar 22 11:54:14 xcp-ng-04 SM: [2685] set_dirty 'OpaqueRef:ea31ae92-4207-4c8b-8db6-da901c6a00a8' succeeded
Mar 22 11:54:14 xcp-ng-04 SM: [2709] sr_update {'sr_uuid': '38c2baa3-bc8f-fbc5-ef5a-42461db92c51', 'subtask_of': 'DummyRef:|ae4505d5-b9fe-4f39-92dc-67ab9d0b579b|SR.stat', 'args': [], '$
Mar 22 11:54:15 xcp-ng-04 SM: [2725] lock: opening lock file /var/lock/sm/bef191f3-e976-94ec-6bb7-d87529a72dbb/sr
Mar 22 11:54:15 xcp-ng-04 SM: [2725] lock: acquired /var/lock/sm/bef191f3-e976-94ec-6bb7-d87529a72dbb/sr
Mar 22 11:54:15 xcp-ng-04 SM: [2725] sr_attach {'sr_uuid': 'bef191f3-e976-94ec-6bb7-d87529a72dbb', 'subtask_of': 'DummyRef:|ae624d96-e91a-4a12-afd6-35593be4ce51|SR.attach', 'args': [],$
Mar 22 11:54:15 xcp-ng-04 SMGC: [2725] === SR bef191f3-e976-94ec-6bb7-d87529a72dbb: abort ===
Mar 22 11:54:15 xcp-ng-04 SM: [2725] lock: opening lock file /var/lock/sm/bef191f3-e976-94ec-6bb7-d87529a72dbb/running
Mar 22 11:54:15 xcp-ng-04 SM: [2725] lock: opening lock file /var/lock/sm/bef191f3-e976-94ec-6bb7-d87529a72dbb/gc_active
Mar 22 11:54:15 xcp-ng-04 SM: [2725] lock: tried lock /var/lock/sm/bef191f3-e976-94ec-6bb7-d87529a72dbb/gc_active, acquired: True (exists: True)
Mar 22 11:54:15 xcp-ng-04 SMGC: [2725] abort: releasing the process lock
Mar 22 11:54:15 xcp-ng-04 SM: [2725] lock: released /var/lock/sm/bef191f3-e976-94ec-6bb7-d87529a72dbb/gc_active
Mar 22 11:54:15 xcp-ng-04 SM: [2725] lock: acquired /var/lock/sm/bef191f3-e976-94ec-6bb7-d87529a72dbb/running
Mar 22 11:54:15 xcp-ng-04 SM: [2725] RESET for SR bef191f3-e976-94ec-6bb7-d87529a72dbb (master: False)
Mar 22 11:54:15 xcp-ng-04 SM: [2725] lock: released /var/lock/sm/bef191f3-e976-94ec-6bb7-d87529a72dbb/running
Mar 22 11:54:16 xcp-ng-04 SM: [2725] Got exception: Error: Unable to connect to any of the given controller hosts: ['linstor://xcp-ng-02']. Retry number: 0
Mar 22 11:54:19 xcp-ng-04 SM: [2725] Got exception: Error: Unable to connect to any of the given controller hosts: ['linstor://xcp-ng-02']. Retry number: 1

On xcp-ng-02 (linstor controller)

[11:42 xcp-ng-02 ~]# linstor node list
╭────────────────────────────────────────────────────────────╮
┊ Node      ┊ NodeType ┊ Addresses                  ┊ State  ┊
╞════════════════════════════════════════════════════════════╡
┊ xcp-ng-01 ┊ COMBINED ┊ 192.168.2.221:3366 (PLAIN) ┊ Online ┊
┊ xcp-ng-02 ┊ COMBINED ┊ 192.168.2.222:3366 (PLAIN) ┊ Online ┊
┊ xcp-ng-03 ┊ COMBINED ┊ 192.168.2.223:3366 (PLAIN) ┊ Online ┊
╰────────────────────────────────────────────────────────────╯

I list all the linstor PBD on hosts:

[11:49 xcp-ng-01 ~]# xe pbd-list | grep linstor -3
uuid ( RO)                  : e75fdc51-29a4-aa57-bc44-459f80a0d230
             host-uuid ( RO): ad95c6ca-612d-42af-8909-d4e9dc7645bb
               sr-uuid ( RO): bef191f3-e976-94ec-6bb7-d87529a72dbb
         device-config (MRO): provisioning: thin; redundancy: 2; group-name: linstor_group/thin_device; hosts: xcp-ng-01,xcp-ng-02,xcp-ng-03
    currently-attached ( RO): true


--
uuid ( RO)                  : 063db650-55b1-a3e0-9d9a-e94ce938988d
             host-uuid ( RO): 5747f145-0dc2-4987-a6b9-b6c5a7ed0505
               sr-uuid ( RO): bef191f3-e976-94ec-6bb7-d87529a72dbb
         device-config (MRO): hosts: xcp-ng-01,xcp-ng-02,xcp-ng-03; group-name: linstor_group/thin_device; redundancy: 2; provisioning: thin
    currently-attached ( RO): false


--
uuid ( RO)                  : a1f876b1-0568-71ac-9ffb-720e626cb4ab
             host-uuid ( RO): e286a04a-69bf-4d59-a0c8-e7338e8c1831
               sr-uuid ( RO): bef191f3-e976-94ec-6bb7-d87529a72dbb
         device-config (MRO): provisioning: thin; redundancy: 2; group-name: linstor_group/thin_device; hosts: xcp-ng-01,xcp-ng-02,xcp-ng-03
    currently-attached ( RO): true


uuid ( RO)                  : 08564ab5-a518-f709-8527-f592c2592d14
             host-uuid ( RO): eb48f91d-9916-4542-9cf4-4a718abdc451
               sr-uuid ( RO): bef191f3-e976-94ec-6bb7-d87529a72dbb
         device-config (MRO): provisioning: thin; redundancy: 2; group-name: linstor_group/thin_device; hosts: xcp-ng-01,xcp-ng-02,xcp-ng-03
    currently-attached ( RO): true

After that, I remove all the PBD to all hosts to be able to recreate the PBDs on all hosts with the new xcp-ng-04

xe pbd-create host-uuid=e286a04a-69bf-4d59-a0c8-e7338e8c1831 sr-uuid=bef191f3-e976-94ec-6bb7-d87529a72dbb device-config:provisioning=thin device-config:redundancy=2 device-config:group-name=linstor_group/thin_device device-config:hosts=xcp-ng-01,xcp-ng-02,xcp-ng-03,xcp-ng-04
xe pbd-create host-uuid=ad95c6ca-612d-42af-8909-d4e9dc7645bb sr-uuid=bef191f3-e976-94ec-6bb7-d87529a72dbb device-config:provisioning=thin device-config:redundancy=2 device-config:group-name=linstor_group/thin_device device-config:hosts=xcp-ng-01,xcp-ng-02,xcp-ng-03,xcp-ng-04
xe pbd-create host-uuid=eb48f91d-9916-4542-9cf4-4a718abdc451 sr-uuid=bef191f3-e976-94ec-6bb7-d87529a72dbb device-config:provisioning=thin device-config:redundancy=2 device-config:group-name=linstor_group/thin_device device-config:hosts=xcp-ng-01,xcp-ng-02,xcp-ng-03,xcp-ng-04
xe pbd-create host-uuid=5747f145-0dc2-4987-a6b9-b6c5a7ed0505 sr-uuid=bef191f3-e976-94ec-6bb7-d87529a72dbb device-config:provisioning=thin device-config:redundancy=2 device-config:group-name=linstor_group/thin_device device-config:hosts=xcp-ng-01,xcp-ng-02,xcp-ng-03,xcp-ng-04

all succeed. No error.

After that I try to connect all PBDs to the SR

[11:13 xcp-ng-01 ~]# xe pbd-plug uuid=7d588c37-a152-9666-175e-91b2d48c150f
[11:13 xcp-ng-01 ~]# xe pbd-plug uuid=99f76235-1b1a-e5fa-bb19-3883737fcc6d
[11:13 xcp-ng-01 ~]# xe pbd-plug uuid=df727345-f475-b929-ecc1-b506f0053361
[11:13 xcp-ng-01 ~]# xe pbd-plug uuid=8b4ddc6f-e25a-1942-a435-345ccc93551a
Error code: SR_BACKEND_FAILURE_47
Error parameters: , The SR is not available [opterr=Error: Unable to connect to any of the given controller hosts: ['linstor://xcp-ng-02']],

From there, I'm a bit lost...

1- Do I need to add the linstor satellite xcp-ng-04 before doing all the PBDs ?
2- Should I start any of the services on xcp-ng-04 before doing all this ?

Regards

dumarjo

Any input appreciated

Regards

olivierlambert

Question for @ronan-a

ronan-a

@dumarjo Could you open a ticket with a tunnel please? I can take a look. Also: I started a script this week to simplify the management of LINSTOR with add/remove commands.

dumarjo

Hi,
@ronan-a said in XOSTOR hyperconvergence preview:

@dumarjo Could you open a ticket with a tunnel please? I can take a look. Also: I started a script this week to simplify the management of LINSTOR with add/remove commands.

Ticket done on vates.

ronan-a

So after analysis:

The iptables of the new host must be updated (in the case of add/remove action) to connect the corresponding new node to the linstor controller. Otherwise, we can have a "Auto-evict" error in the database.
PBDs must/can be updated after the creation of the new node.

Thank you for the feedback, it's helpful to see the potential issues to automatise LINSTOR management.

dumarjo

To be able to recreate and reconnect all the PBD, I have modified the /etc/hosts file to add manually each hosts with their IPs. I know that @ronan-a is working to fix the hostname addressing in the driver. But at least I can continue to test the scalability.

Looks promising !

dumarjo

Hi,

Ok, Figured out how to do it and get it working on 2 or more nodes. Here the process:

[xcp-ng-01 ~]#wget https://gist.githubusercontent.com/Wescoeur/7bb568c0e09e796710b0ea966882fcac/raw/26d1db55fafa4622af2d9ee29a48f6756b8b11a3/gistfile1.txt -O install && chmod +x install
[xcp-ng-01 ~]# ./install --disks /dev/sdb --thin
[xcp-ng-01 ~]# vgchange -a y linstor_group
[xcp-ng-01 ~]# xe sr-create type=linstor name-label=XOSTOR host-uuid=71324aae-aff1-4323-bb0b-2c5f858b223e device-config:hosts=xcp-ng-01 device-config:group-name=linstor_group/thin_device device-config:redundancy=1 shared=true device-config:provisioning=thin

Now the SR is available to create the VMs. For simplicity, I won't create VM now.

[xcp-ng-02 ~]# wget https://gist.githubusercontent.com/Wescoeur/7bb568c0e09e796710b0ea966882fcac/raw/26d1db55fafa4622af2d9ee29a48f6756b8b11a3/gistfile1.txt -O install && chmod +x install
[xcp-ng-02 ~]# ./install --disks /dev/sdb --thin
[xcp-ng-02 ~]# vgchange -a y linstor_group

On both hosts, I modify the /etc/hosts to add both hosts with their IP to workaround the driver bug

Start services on nodes 2

systemctl enable minidrbdcluster.service
systemctl enable linstor-satellite.service
systemctl start linstor-satellite.service
systemctl start minidrbdcluster.service

Open IPTables on node 2

/etc/xapi.d/plugins/firewall-port open 3366
/etc/xapi.d/plugins/firewall-port open 3370
/etc/xapi.d/plugins/firewall-port open 3376
/etc/xapi.d/plugins/firewall-port open 3377
/etc/xapi.d/plugins/firewall-port open 8076
/etc/xapi.d/plugins/firewall-port open 8077
/etc/xapi.d/plugins/firewall-port open 7000:8000

[xcp-ng-02 ~]linstor --controllers=10.33.33.40 node create --node-type combined $HOSTNAME
[xcp-ng-02 ~]linstor --controllers=10.33.33.40 storage-pool create lvmthin $HOSTNAME xcp-sr-linstor_group_thin_device linstor_group/thin_device
[xcp-ng-02 ~]linstor --controllers=10.33.33.40 resource create $HOSTNAME xcp-persistent-database --storage-pool xcp-sr-linstor_group_thin_device

After that, you should be in splitbrain. I have no Idea !, my knowledge are not good enough to figure it right now. But I know how to fix it.

On node 2 run those commands:

drbdadm secondary all
drbdadm disconnect all
drbdadm -- --discard-my-data connect all

On node 1 run those commands:

drbdadm primary all
drbdadm disconnect all
drbdadm connect all

Now the linstor/drbd are in good shape and should have all the resources.
for the sake of fun, I change the place count from 1 to 2 on linstor controller

[xcp-ng-01 ~]linstor rg modify --place-count 2 xcp-sr-linstor_group_thin_device

Now the replication is working.

Now on node 1, I unplug the pbd of xcp-ng-02, destroyit and create a new on with 2 hosts
[xcp-ng-01 ~]# xe pbd-unplug uuid=6295519d-1071-2127-4313-f14c9615f244
[xcp-ng-01 ~]# xe pbd-destroy uuid=6295519d-1071-2127-4313-f14c9615f244
[xcp-ng-01 ~]# xe pbd-create host-uuid=eb48f91d-9916-4542-9cf4-4a718abdc451  sr-uuid=505c1928-d39d-421c-1556-143f82770ff5  device-config:provisioning=thin device-config:redundancy=2 device-config:group-name=linstor_group/thin_device device-config:hosts=xcp-ng-01,xcp-ng-02
[xcp-ng-01 ~]# xe pbd-plug uuid=774971b4-dd03-18c8-92e5-32cac9bdc1e3

do the same thing with the second pbd and everything is connected together.

Not an easy task !

Imagine if I have 30 Vms... alot of resources to be created....

olivierlambert

I edited your post to use Markdown syntax. It's easier to read. Don't forget next time

abufrejoval

@ronan-a

Ah, so diskless nodes aren't supported at Xcp-ng storage API level yet?

Because that was the next thing on my list of things to try and I'm confident enough to do it at the DRBD level (even if the documentation is skimping on examples there). But if still needs SR integration on the Xen hosts, then I can push that back onto the todo stack.

For background: For Xcp-ng and oVirt I have HCI clusters running permanently on low-power machines. And then I have powerful (noisy and hungry) workstations which I turn off when I'm not running experiments (they also run all kids of different operating systems).

So these only occasionally connect to the clusters but need access to the HCI storage. That's very natural in GlusterFS and I need something similar in LINSTOR.

ronan-a

@dumarjo FYI this logic is available since few days in this commit: https://github.com/xcp-ng/sm/commit/ec3ffffced1bf63fc3a88e0681ecbf7e288828de But not merged in the current beta.

Regarding the splitbrain, it's probably because you use two hosts, the minimal ideal count is 3. With a replication count of two, the third node can be used as a quorum “tie breaker” diskless node.

Imagine if I have 30 Vms... alot of resources to be created....

I'm not sure to understand the link with VMs? ^^"

0

Wescoeur committed to xcp-ng/sm

feat(linstor-manager): add methods to add remove/host from LINSTOR SR

Signed-off-by: Ronan Abhamon <ronan.abhamon@vates.fr>

dumarjo

@ronan-a

Imagine if I have 30 Vms... alot of resources to be created....

I'm not sure to understand the link with VMs? ^^"

From what I understand, I have to recreate all the resource manually, since all the VMs disk create a resource.. Maybe I'm wrong again

I'm very interested testing this new add_host functionnality. The fun part is now I have a better undertanding of what is going on under the hood !

regards,

ronan-a

@abufrejoval Diskless volumes are supported, you can start a VM using this type of volume on a host. A diskless link is created on the fly if necessary.

Also good news, it's now possible to use a host without physical disk. I just removed a limitation during the SR creation: https://github.com/xcp-ng/sm/commit/536277d4026ac7baeb9890fe65a87feb7d5a4721
We must test this change, but in theory it should not create a problem.

1

Wescoeur committed to xcp-ng/sm

feat(LinstorVolumeManager): support SR creation with diskless nodes

Signed-off-by: Ronan Abhamon <ronan.abhamon@vates.fr>

ronan-a

@dumarjo I think we can add a script to reconfigure the replication. For example to create a copy of each VDI on a new node, or in a balanced way on a set of new nodes.

Swen

@ronan-a Is it already possible to specify a network adapter for the storage traffic?
I edited /etc/hosts and added each xcp-ng server with the IP of the storage interface. IS this a good workaround?