XCP-ng 8.3 betas and RCs feedback 🚀
-
This post is deleted! -
This post is deleted! -
OMG! I have just noticed that on the latest beta of 8.3 the Garge Collector gives a percentage of completion in XO(a) "Tasks" and estimation of time to completion!
THANK YOU!! THANK YOU!! THANK YOU!!!
-
To be fair, this feature was developed by XAPI developers at XenServer, as far as I remember
That's a benefit of open source.
-
But the display inside XO and the time left computation is done by XO
-
Actually, another cool feature I just noticed is that I am now able to take snapshots of my Windows 11 VM's with vTPM attached.. So.. The day is just getting better and better..
I havent tried doing a backup / export yet.. I think that if it worked, I would be overwhelmed with to0 much good news for a single day and faint
LOL -
IIRC, that should work now
-
Indeed.
-
Any updates coming for 8.3.? It seems like 8.2 had a slew come out last weekish. No biggie...all is well....just curious.
-
Yes, big update coming for 8.3
-
@stormi
Cool...look forward to it! -
Hello @stormi @olivierlambert
Is there any real performance difference between installing XCP-NG host on BIOS mode vs installing it on UEFI mode? (Not the VMs, I mean the host itself)
Is there any benefit of installing xcp-ng using uefi, considering we can still have uefi VMs even if we install the host in BIOS mode... correct ?
-
@gb-123 I don't see the relevance of performance. It's in both cases the same software running it's just diffrent how a boot is handled and UEFI has some more security features to ensure the OS running on the hardware is authentic where as in BIOS malware can easily overtake the OS or tamper with the OS.
In normal operation you wouldn't see performance diffrence in my opinion.
-
@gb-123 Using BIOS for a hypervisor generally complicates things related to disk and partition management, since a BIOS machine boots from an MBR-formatted disk, and MBR does not directly support drives greater than 2TiB. For a hypervisor, the main benefits of UEFI are:
- support for booting from GPT-formatted drives (which thus can be larger than 2TiB);
- power management (which is generally better in a UEFI-native OS than one being booted in CSM (a.k.a Legacy BIOS) mode; and
- Secure Boot, which you can use to ensure that the OS being booted is cryptographically signed by an OS vendor that you trust.
See here for a more detailed comparison of BIOS and UEFI. The comments about Fast Boot aren't relevant here.
I personally have XCP-ng installed in UEFI mode and then run all of my VMs in BIOS mode, because I want those benefits of UEFI on the host system, but don't want all of my guests/VMs' boot disks to have the overhead of an EFI System Partition.
-
Also note that support for installing on legacy BIOS firmware will likely be removed in a future release, so better select UEFI by default. In XCP-ng, this will still be supported, but there's a deprecation notice in the installer.
-
Thank you soooo much for your valuable answers !
Thanks for letting me know about the deprecation. I missed seeing it in XCP-Ng 8.3 Beta 2 while I was testing it using the ISO install method.
I believe there is no 'upgrade' path from BIOS to UEFI? ( I would need to completely re-install the host again... right ?)Does XCP-ng have the option of secure boot when installing from iso? (I am not talking about the Guest VMs here)
-
I believe there is no 'upgrade' path from BIOS to UEFI? ( I would need to completely re-install the host again... right ?)
That is correct, and the installation documentation mentions this:
WARNING
NEVER switch from UEFI to BIOS (or vice-versa) after you installed XCP-ng. Stick to the mode that you chose during the install.
Does XCP-ng have the option of secure boot when installing from iso?
Not yet, though that feature seems to be tracked on GitHub here and mentions a talk discussing the scope of the problem (YouTube video). Unfortunately, it looks like there hasn't been any progress on this in the last 2 or 3 years.
-
I just published the last big update before the release of the XCP-ng 8.3 Release Candidate. The last pre-release before the final release.
Now is the best time to test thoroughly.
The changes contain both the result of the work of XCP-ng developers, and a rebase on the latest updates of the XenServer 8 release when appropriate.
Main highlights:
- Rebased on XenServer 8 + updates published since the release
- We enriched the API in order to let Xen Orchestra give you feedback about the status of Secure Boot in your UEFI VMs and updated the Secure Boot documentation
- Xen Orchestra feature 1: Warn before UEFI VM creation if Secure Boot is on but the pool is not setup for SB
- Xen Orchestra feature 2: Display accurate Secure Boot status and allow to fix a VM's UEFI certs
- Both will be included in the next Xen Orchestra release, which is currently planned for the end of this week.
- Security updates: curl, Intel and AMD microcode, OpenSSL, openvswitch, sudo, xen
- Installer: support for upgrading from 8.3 alpha/betas is back.
- More python tools ported to python3.
- Alternate "debugging" kernel updated to version 4.19.316.
- Optional
netdatapackage updated to versionn 1.44.3. - New optional driver package
mlx4-modules-altwhich provides the LTS 4.9 version of the MLX4 drivers, used by older ConnectX cards. - XO Lite updated to version 0.2.3:
- [Pool/Dashboard] In the
Storage usagecard, DVDs are no longer taken into account - [Header] Add link to XOA when XOA is detected on the pool
- Add german translation (based on the contribution made by @borzel.
- [Pool/Dashboard] In the
Packages details (detailed changelog available by following the links)
- amd-microcode
- blktap
- Various drivers updated:
- curl-8.6.0-2.1.xcpng8.3
- edk2-20220801-1.7.5.1.xcpng8.3
- gdisk-1.0.10-1.xcpng8.3
- gpumon-24.0.0-4.1.xcpng8.3
- guest-templates-json-2.0.10-1.1.xcpng8.3
- host-installer-10.10.16.xcpng.2-2.xcpng8.3
- intel-microcode
- interface-rename-2.0.5-1.xcpng8.3
- kernel-4.19.19-8.0.34.2.xcpng8.3
- kernel-alt-4.19.316+1-1.xcpng8.3
- kexec-tools-2.0.15-20.xcpng8.3
- logrotate-3.8.6-21.xcpng8.3
- lvm2-2.02.180-16.1.xcpng8.3
- ncurses-6.4-3.xcpng8.3
- net-snmp-5.7.2-51.1.xcpng8.3
- netdata-1.44.3-1.1.xcpng8.3
- nspr-4.35.0-1.el7_9
- nss-3.90.0-2.el7_9
- nss-softokn-3.90.0-6.el7_9
- nss-util-3.90.0-1.el7_9
- openssl-1.0.2k-26.1.xcpng8.3
- openvswitch-2.17.7-1.3.xcpng8.3
- python-pam-1.8.4-1.xcpng8.3
- qemu-4.2.1-5.2.9.xcpng8.3
- setup-2.8.71-9.1.xcpng8.3
- sm (SMAPIv1 storage manager)
- sudo-1.9.15-3.1.xcpng8.3
- swtpm-0.7.3-8.xcpng8.3
- xapi-24.16.0-1.1.xcpng8.3
- xcp-featured-1.1.7-2.xcpng8.3
- xcp-ng-deps-8.3-8
- xcp-ng-plymouth-theme-1.1.0-2.xcpng8.3
- xcp-ng-release-8.3.0-24
- xcp-python-libs-3.0.4-1.1.xcpng8.3
- xcp-python-libs-compat-2.3.5-6.xcpng8.3
- xen-4.17.4-3.xcpng8.3
- xenserver-hwdata-20240411-1.xcpng8.3
- xo-lite-0.2.3-1.xcpng8.3
- xs-openssl-1.1.1k-12.1.xcpng8.3
- xsconsole-11.0.2-1.1.xcpng8.3
Reboot after update
-
@stormi
Update: This no longer gives errors after yum autoremove.
I'm guessing that this might be a holdover from me upgrading in place (yum) from 8.2?*Tried updating, both through XO Source, and via yum upgrade.
Results in error:*
Transaction Summary ======================================================================================================================== Install 1 Package (+4 Dependent packages) Upgrade 88 Packages Total size: 164 M Is this ok [y/d/N]: y Downloading packages: Running transaction check Running transaction test Transaction check error: file /lib/firmware/intel-ucode/06-8f-05 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-8f-06 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-8f-07 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-8f-08 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-97-02 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-97-05 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-9a-03 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-9a-04 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-b7-01 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-be-00 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-bf-02 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-bf-05 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-cf-01 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 file /lib/firmware/intel-ucode/06-cf-02 from install of intel-microcode-20240419-1.xcpng8.3.noarch conflicts with file from package microcode_ctl-2:2.1-26.xs28.1.xcpng8.2.x86_64 Error Summary ------------- [16:24 xcp ~]#Update: I fixed it with yum autoremove
[16:29 xcp ~]# yum autoremove Loaded plugins: fastestmirror Resolving Dependencies --> Running transaction check ---> Package libqb.x86_64 0:1.0.1-6.el7 will be erased ---> Package libxslt.x86_64 0:1.1.28-5.el7 will be erased ---> Package microcode_ctl.x86_64 2:2.1-26.xs28.1.xcpng8.2 will be erased ---> Package python2-bitarray.x86_64 0:0.8.3-2.el7 will be erased ---> Package python2-scapy.noarch 0:2.4.5-3.xcpng8.3 will be erased --> Finished Dependency Resolution --> Finding unneeded leftover dependencies Found and removing 0 unneeded dependencies Dependencies Resolved ================================================================================================================================================================================================================= Package Arch Version Repository Size ================================================================================================================================================================================================================= Removing: libqb x86_64 1.0.1-6.el7 @install/$releasever 193 k libxslt x86_64 1.1.28-5.el7 @install/$releasever 486 k microcode_ctl x86_64 2:2.1-26.xs28.1.xcpng8.2 @xcp-ng-updates 12 M python2-bitarray x86_64 0.8.3-2.el7 @xcp-ng-base 210 k python2-scapy noarch 2.4.5-3.xcpng8.3 @xcp-ng-base 11 M Transaction Summary ================================================================================================================================================================================================================= Remove 5 Packages Installed size: 25 M Is this ok [y/N]: y Downloading packages: Running transaction check Running transaction test Transaction test succeeded Running transaction Erasing : 2:microcode_ctl-2.1-26.xs28.1.xcpng8.2.x86_64 1/5 Erasing : python2-scapy-2.4.5-3.xcpng8.3.noarch 2/5 Erasing : python2-bitarray-0.8.3-2.el7.x86_64 3/5 Erasing : libxslt-1.1.28-5.el7.x86_64 4/5 Erasing : libqb-1.0.1-6.el7.x86_64 5/5 Verifying : python2-scapy-2.4.5-3.xcpng8.3.noarch 1/5 Verifying : libqb-1.0.1-6.el7.x86_64 2/5 Verifying : libxslt-1.1.28-5.el7.x86_64 3/5 Verifying : 2:microcode_ctl-2.1-26.xs28.1.xcpng8.2.x86_64 4/5 Verifying : python2-bitarray-0.8.3-2.el7.x86_64 5/5 Removed: libqb.x86_64 0:1.0.1-6.el7 libxslt.x86_64 0:1.1.28-5.el7 microcode_ctl.x86_64 2:2.1-26.xs28.1.xcpng8.2 python2-bitarray.x86_64 0:0.8.3-2.el7 python2-scapy.noarch 0:2.4.5-3.xcpng8.3 Complete! -
@probain I left this conflict on purpose because update via yum is not supported from 8.2 to 8.3.
