Epyc VM to VM networking slow
-
@olivierlambert That's a good point about SR-IOV, would be a good workaround if super fast NIC speeds are needed in a guest specifically.
-
Would sr-iov with xoa help backup speeds?
-
@Forza said in Epyc VM to VM networking slow:
Would sr-iov with xoa help backup speeds?
If you specify the SR-IOV NIC, it will be wire-speed.
-
@Forza The XOA backup performance is more related to processing and not network, at least as I understand it and have tested.
So I don't think you'll see much of a change there.
-
On Intel, the biggest bottleneck ATM is the export speed capability of the Dom0. On AMD, the backup speed is also affected by the lack if equivalent of iPAT in Intel, but it might depends also on other factors (backup repo speed etc.)
-
@olivierlambert Yeah so far backups have been fast enough to not pose some huge issue though.
IMO if you have a huge VM (many TB) it should just be dealt with on a NAS or something instead of a VHD.
Still glad that qcow2 is coming though!
-
Hello everyone!
It looks like we are also affected with the issue. A week of investigation led us to this thread and our test results are very close to what is described here.
We have VM routers based on OEL8 (tested with all available kernels), xcp-ng 8.2, AMD EPYC 7443P 24-Core Processor, NICs: BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller
Network performance has significantly degraded after moving the VMs to the EPYC hosts, tests were performed with iperf:
- iperf hosts outside of the hypevisor, VM-router on the hypervisor:
UDP and TCP: ~1.5Gbps - both iperf hosts and a router on the hypervisor:
UDP ~1.5Gbps, TCP ~7Gbps
We have tried SR-IOV and made a test with one 10Gb NIC and got ~9Gbps with TCP and around 4Gbps with UDP.
SR-IOV however seems not usable for us since it looks like we cannot use it over LACP which is required for other VMs redundancy. Alternatively we need to use some additional NICs to use with SR-IOV on our routers or seek for some other connection options within our datacenter.
- iperf hosts outside of the hypevisor, VM-router on the hypervisor:
-
Hello everyone!
Great news, now you have something to test: https://xcp-ng.org/forum/topic/10943/network-traffic-performance-on-amd-processors
Please go there, follow instruction carefully and report please!
-
@olivierlambert This is great, thanks for letting us know! I'll give this a shot in my lab as soon as I can.
-
The fix, which was proposed as a test to resolve some of the issues encountered, has been integrated into an official update candidate which will be released to everyone next time we publish updates. For more information on this update, you can consult the following post: https://xcp-ng.org/forum/post/96135
