Issue with VM network dropping in and out
-
@gskger said in Issue with VM network dropping in and out:
dmesg | grep -i eth
Last login: Wed Jan 31 09:11:37 2024 from 192.168.20.168 [13:59 GLS-XENHOST08 ~]# dmesg | grep -i eth [ 1.042384] xen_netfront: Initialising Xen virtual ethernet driver [ 2.735978] r8125 Ethernet controller driver 9.012.03-NAPI-PTP-RSS loaded [ 3.823280] ACPI Error: Method parse/execution failed \_SB.UBTC._DSM, AE_NOT_FOUND (20180810/psparse-516) [ 3.860193] r8125 0000:02:00.0 side-2697-eth0: renamed from eth0 [ 5.989957] r8125 0000:02:00.0 eth0: renamed from side-2697-eth0 [ 7.086183] eth0: 0xffffc90040540000, 38:f7:cd:c6:d5:82, IRQ 177 [ 7.114826] r8125 0000:02:00.0 eth0: registered PHC device on eth0 [ 7.114829] r8125 0000:02:00.0 eth0: reset PHC clock [ 7.148004] device eth0 entered promiscuous mode [ 9.927534] r8125: eth0: link up [133076.658774] NETDEV WATCHDOG: eth0 (r8125): transmit queue 1 timed out [133076.685550] r8125 0000:02:00.0 eth0: reset PHC clock [133076.706192] r8125: eth0: link down [133079.932108] r8125: eth0: link up [13:59GLS-XENHOST08~]#These are the logs for the NIC
-
It happens across all Windows OS, WIN 11/ Server 2016/2019/2022
But on one of the VM it never has issue.
But if I move the VM back to the other Host with the 1GB nic all the VM behave correctly.
Thank you.
-
@glenlewis09 Just to get more information on the NIC in your system, can you first identify the NICs with
lspci | grep Ethernet(returns the ID00:1f.6on my system)# lspci | grep Ethernet 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (11) I219-LMand than get more details with
lspci -s 00:1f.6 -vvusing the ID of your NIC# lspci -s 00:1f.6 -vv 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (11) I219-LM Subsystem: Hewlett-Packard Company Device 8715 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 212 Region 0: Memory at e1200000 (32-bit, non-prefetchable) [size=128K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee00f98 Data: 0000 Kernel driver in use: e1000e Kernel modules: e1000eWhile this does not address your issue, it gives more insight into your setup.
Edit: some typos
-
@gskger [14:39 GLS-XENHOST08 ~]# lspci | grep Ethernet 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05) [14:39 GLS-XENHOST08 ~]# ^C [14:39 GLS-XENHOST08 ~]# lspci -s 02:00.0 -vvv 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05) Subsystem: Realtek Semiconductor Co., Ltd. Device 0123 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 36 Region 0: I/O ports at f000 [size=256] Region 2: Memory at fce00000 (64-bit, non-prefetchable) [size=64K] Region 4: Memory at fce10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 256 bytes, MaxReadReq 2048 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Via message/WAKE# DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [b0] MSI-X: Enable+ Count=32 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data pcilib: sysfs_read_vpd: read failed: Input/output error Not readable Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [148 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [168 v1] Device Serial Number 01-00-00-00-68-4c-e0-00 Capabilities: [178 v1] Transaction Processing Hints No steering table available Capabilities: [204 v1] Latency Tolerance Reporting Max snoop latency: 1048576ns Max no snoop latency: 1048576ns Capabilities: [20c v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=150us PortTPowerOnTime=150us Capabilities: [21c v1] Vendor Specific Information: ID=0002 Rev=4 Len=100 <?> Kernel driver in use: r8125 Kernel modules: r8125 [14:40GLS-XENHOST08~]# -
@glenlewis09 Can you please edit your post and format the output as code (insert ``` before and after the output)? This improves readability.
-
@gskger done, thank you for the correction.
-
@glenlewis09 Again just to double check: your XCP-ng 8.2.1 is fully up-to-date (
yum updatereturnsNo packages marked for update)? The refreshed 8.2.1 ISO from December 2023 contained updated drivers contributed by @Andrew, including ther8125driver. -
@gskger said in Issue with VM network dropping in and out:
yum update
[15:25 GLS-XENHOST08 ~]# yum update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile Excluding mirror: updates.xcp-ng.org * xcp-ng-base: mirrors.xcp-ng.org Excluding mirror: updates.xcp-ng.org * xcp-ng-updates: mirrors.xcp-ng.org No packages marked for update [15:25GLS-XENHOST08~]# -
@glenlewis09 The only thing that realy stands out is this error message:
pcilib: sysfs_read_vpd: read failed: Input/output error Not readableCan you please try
dmesg | grep VPDand report the output (if any)? -
@gskger said in Issue with VM network dropping in and out:
dmesg | grep VPD
[15:36 GLS-XENHOST08 ~]# dmesg | grep VPD [ 5.967152] r8125 0000:02:00.0: invalid short VPD tag 00 at offset 1 [15:36GLS-XENHOST08~]# -
I seem to be able to reproduce the Windows 2022 RDP issue on my XCP 8.2.1/AMD/r8125 box (sometimes). It does not seem to happen on my other intel systems or with other OS's.... I'll see what I can find/fix.
I don't think the VPD warning is an actual problem.
-
Thank you, it is driving me crazy at first. I though my switch was bad so I bought a new one just incase. Then It didn't solve it so I though my fiber was causing TX/RX issues so I replaced it.
I am glad you can somewhat reproduce the error.
-
@Andrew said in Issue with VM network dropping in and out:
I don't think the VPD warning is an actual problem.
Yes, I don't think so either.
-
Welcome to using cheap commodity hardware for server class uses...
It seems the r8125 acts differently on my lab test machines. I don't know why the same chip and driver acts differently. It seems the tx-checksumming is forced off by for one system, and on by default for another. It seems this is a problem for the r8125, but not other chipsets and affects some OS's but not all. It seems there must be a bug in the vendor driver code....
You can make the feature change on the XCP command line using:
ethtool -K eth0 tx off tso offto see if it fixes the problem. Please let me know if that fixes the Win 2022 RDP issue for you (it does for me). A host reboot will revert the change. -
I think you did find a fix; how can I apply this to the host, so it has this setting on each reboot?
So far, no issues at all with the network! Truly I am happy and even if I have to run this code on each boot up at least the mini pc isn't useless.
-
@glenlewis09 I'll look at changing the default in the XCP r8125 driver until Realtek can fix it (which may be never).
-
@Andrew @gskger @olivierlambert @john-c
Truly Thank you so much for helping me resolve this issue.
I know I have to run the command on each reboot, but it is much better than having hardware I can't even use.
To all that help me and walked me through the process thank you
I know you all have much on your plates but to take the time to dive into this problem is awesome!
If you do release an update to the driver let me know so I can test it. I owe you for the help!
-
@glenlewis09 You can download an updated driver test from my page.
Just log in to the XCP host(s), use
wgetto download the RPM files and then useyum install r8125....to install it and reboot. -
Darn crappy hardware, I'm not surprised but Realtek never disappoint
-
@Andrew said in Issue with VM network dropping in and out:
yum install r8125
What URL should I use for the wget, I guess this allows me to add a repository for the yum update to download from?
I tried: wget https://xcp-ng.org which was just a random try.
But that was most definitely not the correct URL. I don't think the index page will help me much lol.
Again thanks for all the help on this.
