All NFS remotes started to timeout during backup but worked fine a few days ago

tjkreidl

@Forza That all is good advice. Again, the showmount command is a good utility that cam show you right away if you can see/mount the storage device from your host.

CodeMercenary

@Forza Thank you. I'll go learn about fsid and implement that. I'm very new to NFS so I appreciate the input.

I do not export it more than once, no nested exports.

I was out of the office yesterday but since making those changes the other day, the backups to UNRAID are working but the backups to the Synology array are failing with EIO: error close and EIO: i/o error, unlink '/run/xo-server/mounts/<guid>/xo-vm-backups/<guid>/vdis/<guid>/<guid>/.20240802T110016Z.vhd'

Going to investigate that today too. That's a brand-new side quest in this adventure.

I also have a couple VMs that are failing with VDI must be free or attached to exactly one VM but I suspect that's due to me having to reboot the server to get the prior backup unstuck.

Forza

@tjkreidl said in All NFS remotes started to timeout during backup but worked fine a few days ago:

@Forza That all is good advice. Again, the showmount command is a good utility that cam show you right away if you can see/mount the storage device from your host.

I do not think showmount lists nfs4 only clients. At least not on my system. For nfs4 I can see connected clients via /proc/fs/nfsd/clients/

Debug logging on a Linux nfs server can be controlled with rpcdebug. To enable all debug output for the nfsd you can use rpcdebug -m nfsd all. Though on the Unraid/Synology it might be different.

In dmesg it would look like this:

[465664.478823] __find_in_sessionid_hashtbl: 1722337149:795964100:1:0
[465664.478829] nfsd4_sequence: slotid 0
[465664.478831] check_slot_seqid enter. seqid 4745 slot_seqid 4744
[465664.478928] found domain 10.5.1.1
[465664.478937] found fsidtype 7
[465664.478941] found fsid length 24
[465664.478944] Path seems to be </mnt/6TB/volume/haiku>
[465664.478946] Found the path /mnt/6TB/volume/haiku
[465664.478994] --> nfsd4_store_cache_entry slot 00000000e3c4c7e5

CodeMercenary

I used exportfs -v on UNRAID to look at the share options, without changing anything first, and they were set to:
(async,wdelay,hide,no_subtree_check,fsid=101,sec=sys,rw,secure,root_squash,no_all_squash)

So, fsid was already being used.

The UNRAID remote has worked the last couple days, since I set soft,timeo=15,retrans=4. I'm curious to see how it does over the weekend.

I'm having trouble getting the VDIs detached from dom0.

Forza

@CodeMercenary said in All NFS remotes started to timeout during backup but worked fine a few days ago:

I used exportfs -v on UNRAID to look at the share options, without changing anything first, and they were set to:
(async,wdelay,hide,no_subtree_check,fsid=101,sec=sys,rw,secure,root_squash,no_all_squash)

So, fsid was already being used.

This is good.

I'm having trouble getting the VDIs detached from dom0.

I was thinking the issue was using the nfs as a Remote (for storing backups), not as an SR (storage repository for VM/VDI). Those are very different things with different needs. Using soft on a SR can cause corruption in your VDI. I would also pay attention to the async export option as this can lead to corruption if your nfs server crashes or looses power (unless you have battery backups, etc).

CodeMercenary

@Forza Seems you are correct about showmount. On UNRAID running v4 showmount says there are no clients connected. I previously assumed that meant XO only connected during the backup. When I look at /proc/fs/nfsd/clients I see the connections.

On Synology, running v3, showmount does show the XO IP connected. Synology is supposed to support v4 and I have the share set to allow v4 but XO had trouble connecting that way. Synology is pretty limited in what options it lets me set for NFS shares.

Synology doesn't have rcpdebug available. I'll see if I can figure out how to get more logging info about NFS.

CodeMercenary

@Forza Sorry, you were correct, I just mixed in another new issue. NFS is currently used only for backups. All my SRs are in local storage. It just happened that I now have backups failing not just because of the NFS issue but because of the VDI issue but I think it's a side-effect of the NFS problem causing the backup to get interrupted so now the VDI is stuck attached to dom0. I should have made that more clear or never mentioned the VDI issue at all.

CodeMercenary

@Forza said in All NFS remotes started to timeout during backup but worked fine a few days ago:

I would also pay attention to the async export option as this can lead to corruption if your nfs server crashes or looses power (unless you have battery backups, etc).

I do have battery backup for both NFS hosts. async must be a default since I didn't set it. I have no problem disabling that if it will improve reliability. If it makes a difference, both systems are sharing folders on HDD, not SSDs.

Seems the Synology does support v4. The other day I think I tried v4.2 and it failed so I dropped back to v3 and that worked. I hadn't tried v4.1 and v4. Maybe it'll work better with v4 than it has with v3.

Forza

@CodeMercenary That's OK. I just didn't want to confuse things and give bad advice for you

archw

I got the same thing two night's ago.
"timeout while getting the remote 0d2da3ba-fde1-blah-blah-blah"

I rebooted teh NFS server and everything worked fine last night.

CodeMercenary

So far it seems like there were two things that fixed this.

Setting this in the XO NFS options for the two remotes: soft,timeo=15,retrans=4

Adding vers=4 to the XO NFS option for the Synology connection, as opposed to vers=4.2 or vers=3. It seems the Synology supports version 2, 3 and 4 but not 4.1 or 4.2. So far, version 4 seems to be working better than 3 did.

CodeMercenary

A bit after this I started having trouble again. I scrubbed my delta backup sets, switched to using SMB to access the same share and so far I'm a week in with no trouble at all. Remains to be seen if the strange failures will crop up again but so far I think this is the longest I've gone with the delta backups not having some random failure. Usually, it was a backup getting stuck in Started status for a day or two then switching to Interrupted because I'd reboot the XO VM to unstick it, then one of the VM backups will fail because a VDI is attached to DOM0. I know theoretically NFS is better than SMB but for now the one that breaks least often is the better option. Of course, maybe my issue had nothing to do with NFS but for now it's felt like SMB is more reliable.