Posts made by abelaguilar

correct I have done that. I do not have a gateway or DNS on this specific subnet though. So when I try to ping the other hosts, i get a destination unreachable error.

secondary subnet for 10 gig.

I have two hosts with 10 gig cards connected to a 10 gig switch as well as shared storage on 10 gig as well.

Since this 10 gig network is for data transfer among servers, I do not want to give it a gateway or DNS server.

Is this possible? I was not able to avoid this so I am making up a dns and gateway based on the same subnet even though there is no gateway to access.

however, does not seem to be working as I am not able to ping the other hosts using my chosen subnet . in the case 192.168.10.10 (host 1), 192.168.10.11 (host 2). etc.

@planedrop gotcha ok. i'll try that.

My goal is to have the management network on 1 gig and my 2 hosts and shared storage server in my pool communicate via the 10 gig connection.

Is there documentation somewhere or a tutorial.

I know this is basic networking , but can't seem to figure it out.

Hello: Wondering if there is a document describing how to add a secondary network using 10 gig direct attached sfp+.

I am using a differnet subnet on host and storage server from my managemt network. However, I am not able to ping and establish a connection.