@salemm said in Is NVIDIA Now Allows GeForce GPU Pass-Through For Windows VMs On Linux?:
Quadro P400
@salemm Were you able to get the Quadro P400 working under Ubuntu? I am running into the same issue with nvidia-smi returns No Device were found and the following in dmesg.
[ 781.392366] NVRM: GPU 0000:00:05.0: RmInitAdapter failed! (0x22:0x56:667)
[ 781.392402] NVRM: GPU 0000:00:05.0: rm_init_adapter failed, device minor number 0
@olivierlambert Thanks for the response. It does make sense since I made some changes to the network a few days back.
Hello all,
On a few of my VMs, I recently noticed there is an extra Vif in the Stats tab that is not defined in the Network tab of the VM. In the screenshot below, Vif1 is not defined.
Only Vif0 is defined.
xe vif-list vm-uuid=856fc68c-8244-cda3-413c-3eac130a541f
uuid ( RO) : 100aed9c-e1b2-09a8-9ef1-f0dbd0a83926
vm-uuid ( RO): 856fc68c-8244-cda3-413c-3eac130a541f
device ( RO): 0
network-uuid ( RO): 678ba99f-26b2-85b3-16ea-bf4d7680dda4
Has anyone encountered this before and know how to remove the phantom Vif?
It doesn't have any negative impact on the VM, just want the graph to reflect how many Vif are attached.
Thanks.
@ScottyXCPNG Do you mind sharing details on how you attached your Conbee 2 stick? My setup is a vm Ubuntu running deconz in docker. deconz "see" the stick as a raspbee gateway and the channel is set to 0. Hence I cannot pair anything. Clicking on the channel set button doesn't do anything. deconz log show invalid current channel 0 (todo) repeatedly.
@pdonias I am ok with it not being in the UI as it's not a function I will need frequently. Can you tell me how I can remove this log entry via CLI? Thanks!
It's purely cosmetic, but I am looking for a way to clear the log on the restore tab. I had previously restored a VM, did some testing and then deleted the restored vm from the pool.
@HeMaN - if you're still looking to clean up the old guest-tools.iso, give this a try:
xe vdi-list sr-uuid=<uuid of XCP-ng Tools SR>
This will give you a list of VIDs. Find the one you want to remove and then execute:
xe vdi-forget uuid=<uuid of VID>
Rinse and repeat till all the old guest tools are removed and you won't see them in XOA.
@kcah427 Thanks for sharing your solution. I end up using a Raspberry Pi as a Socat host and passing the USB Zigbee stick over ethernet to the VM. Not ideal but it works.
@kcah427 did you ever resolved this? I have the same result trying to pass a Conbee2 stick into an Ubuntu VM.