Thank you all (@olivierlambert , @teddyastie ) for your valuable responses

Thank you all (@olivierlambert , @teddyastie ) for your valuable responses

@olivierlambert
May I know :

1. what I will miss /won't be able to do vs a user that has not these messages? (otherwise, why they would be raised)
2. if these messages /failures have an impact on the time during which the machine is booting? (it seems the load process is hanging for about a minute)
3. if these messages /failures are officially documented somewhere?
4. how can I resolve these failures, because failures are failures... even if "one should not worry about them"?

Thanks for your help.

Hello,
I just installed XCP-ng on my brand-new bare-metal PC, and when booting, it temporarily stops with the following information:

2026-05-22T18:25:21+0200 : i2c i2c-0: Failed to register i2c client MSFT8000:00 at 0x42 (-16)
2026-05-22T18:25:21+0200 : i2c i2c-0: failed to add I2C device MSFT8000:00 from ACPI
2026-05-22T18:25:21+0200 : efi: EFI_MEMMAP is not enabled.
2026-05-22T18:25:21+0200 : hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19)

Here is the total content of the boot log.
Here is my XCP-ng installation log
Here is my "ASUS ProArt B650-creator" mother-board's BIOS settings

My question are:

1. What are the consequences of these failures?
2. What can be done to correct them?

Thanks in advance for your help.