Offline
The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem.
message: xenopsd internal error: (Failure
"Error from xenguesthelper: xenguest: xc_dom_build_image: [1] panic: xc_dom_boot.c:159: xc_dom_boot_domU_map: failed ")
hpe dl360p gen8. So its HPE problem?
@olivierlambert thanks for the feedback. I guess I understood the documentation wrong. Because I remember how Wendell from level1techs was talking about removing the ethernet devices from dom0...
I've been following the tutorial for pci passthrough on the wiki but it dosnt' work for me.
03:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme II BCM57810 10 Gigabit Ethernet (rev 10)
03:00.1 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme II BCM57810 10 Gigabit Ethernet (rev 10)
04:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
04:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
04:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
04:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
07:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
07:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
# those are all the network devices that will be passed through pfsense vm.
/opt/xensource/libexec/xen-cmdline --set-dom0 "xen-pciback.hide=(0000:03:00.0)(0000:03:00.1)(0000:04:00.0)(0000:04:00.1)(0000:04:00.2)(0000:04:00.3)(0000:07:00.0)"
# no output of the command
/opt/xensource/libexec/xen-cmdline --delete-dom0 xen-pciback.hide
# no output of the command
reboot
xl pci-assignable-list
# empty
So yeah I'm on step 4 and I can't continue because the devices don't show up after reboot.