@olivierlambert Thanks for the link , seems i will go the XOA route as suggested by @Darkbeldin

@olivierlambert did memory test and was a success .

Did a re-install on the host and still getting the same errors

.

SATA controller model IS SAS3008-IR (Avago LSI 12Gb/s SAS3008(IR)). Any ideas ....

@splastunov doing the tests currently but they seem fine at this point. Will check on the SATA -cable

@olivierlambert Sure

@olivierlambert Thank you for the Response, did replace the RAM sticks with new ones and the ssd is fine, suspecting the SATA controller. Any other ideas ....

Am receiving this error ext4-fs error (device sda1) ext4_find_entry:1439 on one of my compute boot disk(ssd) running xcp 8.2.1 . Tested different Lexar and Crucial ssd's but still the error occurs. What could be causing the persistent error.

@olivierlambert Thanks for the link , seems i will go the XOA route as suggested by @Darkbeldin

@olivierlambert Thanks for the insight much appreciated. do you have any guide you would recommend.

Am trying to create a centralized xcp-ng 8.2 pool user management by adding it to Active Directory (Windows server 2019). Have created user groups and added corresponding users to the said groups.
Am able to add the xcp-ng pool to AD and link respective groups successfully. Issue is when i try to reconnect as one of the users in those groups , i get:

Sep 21 10:56:27 xcpone xapi: [error||4753 :::80||backtrace] Raised Server_error(SESSION_AUTHENTICATION_FAILED, [ 
testuser@grocone.com; Error: LW_ERROR_NOT_HANDLED (0x9c51) ]).

Anyone with an insight ?
lwsmd.service is running okay